Front I/O Bracket - Lenovo ThinkCentre M70t Hardware Maintenance Manual

Front I/O bracket

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 60.
2. Remove the front bezel. See "Front bezel" on page 61.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 64.
4. Remove the card reader bracket, if any. See "Card reader" on page 84.
5. Disconnect the power button cable from the system board.
6. Remove the power button from the front I/O bracket.
7. Remove the front I/O bracket.
86
M70t and M80t Hardware Maintenance Manual