Table of Contents
Advertisement
6. Install the M.2 solid-state drive bracket.
7. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Memory module
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Ensure that you follow the installation order for memory modules shown in the following illustration.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 60.
2. Remove the front bezel. See "Front bezel" on page 61.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 64.
.
Chapter 6
Hardware removal and installation
75
Advertisement
Table of Contents
