Drive Bay Assembly - Lenovo ThinkCentre M70t Hardware Maintenance Manual

6. Install the optical drive bracket.
7. Install the optical drive.
8. Connect the signal and power cable to the new optical drive.
9. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

Drive bay assembly

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 60.
2. Remove the front bezel. See "Front bezel" on page 61.
64
M70t and M80t Hardware Maintenance Manual