Note: To remove the screws, you need a special tool (T15 star wrench).
1. Remove the computer cover. See "Computer cover" on page 60.
2. Disconnect the E-lock cable from the system board.
3. Remove the E-lock.
4. Install the E-lock.
5. Connect the E-lock cable to the system board.
6. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Wi-Fi Card
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 60.
82
M70t and M80t Hardware Maintenance Manual