Installation / Warranty Check List; Data Plate And Warning Decal; J1 Data Plate - Big Joe J1-192 Maintenance Repair Parts Manual

The AC motor propels the vehicle in forward or
reverse direction. The vehicle can be driven with the
platform raised or lowered; however the speed is
restricted above 24".
On demand power steering makes the vehicle highly
maneuverable.
The control arms are used to operate the work vehicle
and provide operator safety.
The pick tray is used to place and transport merchan-
dise, equipment and tools.
The operator platform contains the "deadman"
footswitch which must be depressed for the vehicle to
operate.
The folding rear tray provides for transporting up to a
200 pound load.

1-3. DATA PLATE AND WARNING DECAL.

Warning decals are located to the left of the Instrument
panel. The data plate is mounted on the right side of
the Instrument panel.
R6978
1-2
If the data plate or warning decals are lost or damaged
they MUST be replaced immediately. Have your
supervisor or the designated authority contact Big Lift
LLC Authorized Dealer for replacement.
The data plate shows the model, serial number,
capacity, lift height, vehicle weight and minimum bat-
tery weight. See

1-4. INSTALLATION / WARRANTY CHECK LIST.

The Big Lift, LLC Installation and Warranty Registra-
tion Reports are used to initiate the start of the war-
ranty period to the first original end user.
This report also serves as documentation that all items
on the Installation and Warranty Registration Report
were reviewed and discussed with the end user prior
to taking receipt of the equipment.
This report must be completed and returned to Big Lift,
LLC within fifteen (15) days of receipt of equipment.
(See "page 1-3"
at www.bigjoesupport.com)
Figure 1-2 J1 Data Plate
Figure 1-2.
for a copy of the form, also available
BL-J1-192-0315 - 11-19-2019