Advertisement
1x2 HDMI 4K2K Distribution Amplifier
1x4 HDMI 4K2K Distribution Amplifier
1x8 HDMI 4K2K Distribution Amplifier
IMPORTANT WARRANTY INFORMATION.
If you remove the HDMI screw posts, you must use the provided HDMI
Locking Post replacement screws to keep the internal HDMI jack secure.
Removing the HDMI screws without installing the HDMI Locking Post
replacement screws will void your warranty.
SB-565xU2
Advertisement
Table of Contents
Related Manuals for Shinybow USA SB-565 U2 Series
Summary of Contents for Shinybow USA SB-565 U2 Series
- Page 1 SB-565xU2 1x2 HDMI 4K2K Distribution Amplifier 1x4 HDMI 4K2K Distribution Amplifier 1x8 HDMI 4K2K Distribution Amplifier IMPORTANT WARRANTY INFORMATION. If you remove the HDMI screw posts, you must use the provided HDMI Locking Post replacement screws to keep the internal HDMI jack secure. Removing the HDMI screws without installing the HDMI Locking Post replacement screws will void your warranty.
- Page 2 SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
- Page 3 TABLE OF CONTENTS HDMI-4K2K@60Hz Distribution Amplifier Series Thank you for purchasing the SB-5652U2/SB-5654U2/SB-5658U2 HDMI Distribution Amplifier. You will find this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use these HDMI 4K2K@60Hz Distribution Amplifiers.
- Page 4 FEATURES & INSTALLING DIAGRAM FEATURES • (1) Input (1 Source) to (2), (4), or (8) Outputs (Displays) Distribution Amplifier • Supports HDMI 2.0 with EDID HDCP 2.2 Compliant, Pixel clock up to 600MHz • Supports up to Ultra HD 4K2K@60Hz (4:4:4) at 30/50/60Hz (2160p), 1080p, 3D •...
- Page 5 SPECIFICATIONS SPECIFICATIONS • Type of HDMI Distribution Amplifier: (1) Input (1 Source) to (2), (4), or (8) Outputs (Displays) HDMI • HDMI Support: HDMI 2.0 /1.4 4K@60Hz (4:4:4) 8bit, 3D • HDCP / CEC Support: HDCP HDCP 2.2/1.4 Compliant, CEC Compliant •...
- Page 6 FRONT/REAR PANEL I/O INSTRUCTION FRONT/REAR PANEL I/O INSTRUCTION SB-5452U2 1. Power LED indicates presence live signal 2. RX In: HDMI input presence status 3. HDCP working status 4. HDMI outputs presence status 5. Select Embedded EDID Modes: PIN1 PIN2 EDID Mode Full HD Copy Input-1 Reserved...
- Page 7 LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
- Page 8 122 Rose Ln. Suite 303 | Frisco, Texas 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.com...
Need help?
Do you have a question about the SB-565 U2 Series and is the answer not in the manual?
Questions and answers