Table of Contents
Advertisement
Installation of the
intermediate panels
Fitting the flashing tape
Draw the tile shape using a
template.
Cut flashing tape with a knife or
scissors.
34
Roof integration - Mönch-Nonne
Flashing tape
Intermediate panel
1. Push in the intermediate panels as per diagram. If this should foul during
the installation, correct the collector position. Then bend the tabs at the top
of the intermediate panels to prevent them from sliding through.
2. Tighten all screws and nuts to secure the collector.
Tabs
Intermediate panels
15-60°
3062165_201508
Advertisement
Table of Contents
