Table of Contents
Advertisement
Construction
Mounting rail
Flashing tape
Waterproof substrate
Installation and extension
of the lower mounting rail
8 x 80
1. Pre-drill with Ø 5 mm bit and secure the mounting rail to the rafters with the 8 x 80 hexagonal screws (provided).
2. Affix the flashing tape, taking care to remove the protective foil only in the area to be affixed to the mounting rail.
The flashing tape must protrude to the left and right approx. 30 cm over the flashing tape bases. If several strips
of flashing tape are used these must be joined with an overlap of at least 5 cm. (Do not yet affix the flashing tape
to the roof tiles as the collectors have yet to be secured to the mounting rail.)
3062165_201508
Roof integration - Slate roof
Top panel
Collector
Flashing tape
base, left
2 x M8 x 16
coach bolts
Connecting rail
4 x M8 x 16
coach bolts
Mounting rail for
2 collectors (2.26 m)
Mounting rail for
1 add. collector (1.13 m)
Overlap > 5 cm
Flashing tape
15-60°
Flashing tape
base, right
Mounting rail
25
Advertisement
Table of Contents
