Special features for rooftop installation on slate roofs with slate hooks
Collector array width
Mounting rail
3062165_201508
Rooftop installation - Slate tiles
Crosshead screw 6 x 70 mm
M8 x 20 coach bolt
M8 x 20
coach bolt
M8 washer nut
Distribute all supplied double-ended screws evenly over the width of the
CAUTION
collector array to spread the loads applied.
1. Remove the slates where the hooks need to be fitted.
2. Secure the hooks with crosshead screws 6 x 70.
3. Fit mounting rails with coach bolts.
4. Cover the slate hooks with commercially available lead flashing.
5. Cover the roof.
Option
Snow load
extension set
with hooks
Lead flashing
M8 x 20 coach bolt
Lead flashing
>15°
15