Table of Contents
Advertisement
Installation of the skirts
Triangular sealing strip
at the top
Top panel
Rafter
Hook in
side panel
Batten
Triangular
sealing strip
3062165_201508
Roof integration - Interlocking tile
Clamp
Wood screw
(2 pce. per top panel)
4 x 60
Wooden spacer
height = batten
1. Hook in the casing panels on the left and right in accordance with the diagram
and secure them with clamps.
2. Push the top casing panels over the collector frame. As support on each
rafter, a wooden spacer of batten height must be fitted below the casing
panel. Secure the casing panel with clamps.
3. Push the protective edge profiles at the casing panel joint at the top over
the return, see the diagram.
4. Affix the side and top triangular sealing strip to the casing panels.
5. Position the tiles around the skirt; if necessary use half tiles or trim tiles to
size.
Side panel
Triangular sealing strip
30-60°
Edge protector
Triangular sealing
strip at the top and
side
4 x 30
Wood screw
Batten
Clamp (3 pce. per side panel)
23
Advertisement
Table of Contents
