Advertisement
Quick Links
Fountain Components
Image
Item Description
Andalusia
Fountain Water
Feature
Andalusia
Fountain
Pump House
Andalusia
Fountain
Basin
Andalusia
Fountain
Pipe Cap
Fountain Information:
• Professional installation is recommended for this fountain!
• This fountain holds approximately 60 gallons of water.
• This fountain does not fit under a Campania fountain cover.
• Compatible with #10 Refill Device and LED kits
• No stoppers are required to use the refill kit or LED kit for this fountain.
Pump Information:
OEMPF320 - 320 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Caulking Gun
Hammer
Component
Quantity
Item #
FT-120A
1
FT-120B
1
FT-120C
1
FT-
2
120CAP
FT-120 Andalusia Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK300 Pump
(use adapter indicated)
LED-LIGHT
LED-CORD
LED-TRANS
#5 wing nut drain stopper
#7 wing nut drain stopper
Approx. 20" length of 1/2" black
non-kink tubing
Approx. 2" length of 5/8" clear vinyl
Approx. 2" length of 1/2" CPVC pipe
Approx. 42" length of 1/2" galvanized
10 oz. tube of silicone
Hose Clamp
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
1
1
tubing
1
2
pipe
1
Wedges
2
1
rev 3/30/2020
Advertisement
Related Manuals for Campania International Andalusia FT-120
Summary of Contents for Campania International Andalusia FT-120
- Page 1 FT-120 Andalusia Fountain Assembly Instructions Fountain Information: • Professional installation is recommended for this fountain! • This fountain holds approximately 60 gallons of water. • This fountain does not fit under a Campania fountain cover. • Compatible with #10 Refill Device and LED kits •...
- Page 2 FT-120 Andalusia Fountain Assembly Instructions Professional installation is recommended for this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 FT-120 Andalusia Fountain Assembly Instructions Step 9 - Assemble the pump kit: 9a - Using a hose clamp, attach the 1/2" black tubing to the pump outlet. Step 10 - Place the pump and LED light in the fountain and feed the cords through the hole between the basin (FT-120C) and water feature (FT-120A).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.