Summary of Contents for Campania International Portico
Page 1
FT-129 Portico Wall Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 1 gallon of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: WP450 LV - 120 GPH Low Voltage Pump (6 ft.
Page 2
FT-129 Portico Wall Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-129 Portico Wall Fountain Assembly Instructions Step 7 - Fill the basin with water. 7a - If leaking occurs… - Remove the stopper and repeat step 5 again. - Use some of the excess putty to seal the cord around the top of the stopper.
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.