Advertisement
Advertisement
Table of Contents
Related Manuals for DLE DLE130
Summary of Contents for DLE DLE130
- Page 1 Engine DLE130 使用说明书 USER MANUAL 该发动机并非玩具，请特别注意安全，由此引起的所有安全问题我们将不 予负责；为了您更好地使用该产品，请您在使用前仔细阅读说明书。 This engine is not a toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for any injuries and damages result from improper use.
- Page 2 拉力28.5Kg/海拔100米 (Static Thrust 28.5Kg / 100 meters Altitude) 拉力24.5Kg/海拔1800米(Static Thrust 24.5Kg / 1800 meters Altitude) 适用螺旋桨规格(The standard of the propeller): 27× 12；28x10; 28x11; 29x9. 适用火花塞型号(The type of the sparking plug ):DLE-6 2、参数(Specification) 排量(Displacement) :130cm 缸径× 行程( Bore × Stroke ) : 47mm× 37.5mm 压缩比(Compression Ratio):9.2:1...
- Page 3 三、 发动机的调整及安装(ENGINE ADJUSTMENT) 1、每台发动机出厂时都经过了初步调整，用户可以直接使用。但各地区的 海拔高度将会影响化油器的正常工作，化油器油针可能需要进行微调才能达到 最佳的工作位置。推荐化油器安装方向：油门控制为后拉是加油门状态。 Every engine has been preset before delivery. However, altitudes will affect the performance of the carburetor. To obtain the best performance of the engine, it is necessary to make a fine adjustment.Recommended carburetor installation direction：When the throttle is pulled back, the engine is accelerating.
- Page 4 increase the idle speed. Meanwhile, turn the Low-speed Needle (See No.4) clockwise to reduce the oil. Normally, screw the needle to the fully stop/closed position and then open the needle back 1.5 turns. High-speed Needle (See No.5) turns back about 1.0 turns. It is recommended that High-speed Needle be adjusted by the use of the tachometer to obtain the maximum speed and smooth accelerate and decelerate.
- Page 5 联系我们 CONTACT US: Sale:0086-13529826090 Tel:0086-4001006090 Fax：0086-0873-6131518 Website :www.dlengine.com E-mail：dle@dlengine.com 地址：云南省红河州弥勒市弥勒工业园弥阳工业区 Address: Miyang Industry Zone,Mile City, Honghe Prefecture, Yunnan Province, China 弥勒浩翔科技有限公司 Mile Hao Xiang Technology Co. Ltd...
Need help?
Do you have a question about the DLE130 and is the answer not in the manual?
Questions and answers