Error Message For Usb On-The-Go Functions; Timer Setting For The Charger Source Priority - Kodak OGX 5.48a Installation & User Manual

Error message for USB On-The-Go functions:

Error Code Messages
No USB disk is detected.
USB disk is protected from copying.
Document inside the USB disk contains the wrong format.
If any error occurs, error code will only show for 3 seconds. After 3 seconds, it will automatically return to the
main screen.

2. Timer Setting for the Charger Source Priority

This timer setting is to set up the charger source priority per day.
Procedure
Step 1: Press and hold "
charging source priority.
Step 2: Press " ", "
descriptions in Step 3).
Step 3: Please select setting program by following each procedure.
Program#
Press "
select staring time. Press "
" " to confirm. Press "
" " button to adjust values, press "
values are from 00 to 23, with 1-hour increment.
Press "
select staring time. Press "
" " to confirm. Press "
" " button to adjust values, press "
values are from 00 to 23, with 1-hour increment.
Press "
select staring time. Press "
" " to confirm. Press "
" " button to adjust values, press "
values are from 00 to 23, with 1-hour increment.
Press " " button to exit the Setup Mode.
" button for 3 seconds to enter Timer Setup Mode for
" or " " button to enter the selectable programs (detail
Operation Procedure
" button to set up Solar First Timer. Press "
" or "
" button to select end time. Press "
" button to set up Solar & Utility Timer. Press "
" or "
" button to select end time. Press "
" button to set up Solar Only Timer. Press "
" or "
" button to select end time. Press "
" button to
" button to adjust values and press
" button to confirm. The setting
" button to adjust values and press
" button to confirm. The setting
" button to
" button to adjust values and press
" button to confirm. The setting
24
LCD Screen
LCD Screen
" or
" button to
" or
" or