Advertisement

2011年03月版
IXA SERIES
OWNER'S MANUAL

NOTES BEFORE USE:

Be sure to read this manual before using the helmet. Keep the manual for future reference.
Thank you for purchasing a KABUTO helmet. This manual explains how to use
your KABUTO helmet correctly. Please take time to read this instruction manual
before using the helmet, and keep the manual for future reference.
No helmet can protect the user 100% in any case of accidents, but it can reduce
the risk of injury. Please make sure you understand the following cautions and
enjoy riding your bicycle safely.

WEARING THE HELMET PROPERLY:

RIGHT
Make sure the front
edge of the helmet
is just above your
eyebrows
STANDARD ACCESSORY:
(Spare : Visor × 1)
(Spare:Visor Screw × 1)
2
(Size Adjusting Pad × 1set) #Use as necessary
(Spare:Cheek Pads < Thick>×1set) #Use as necessary
WRONG
The front of the
helmet is too far up,
and your forehead is
not properly covered.
1
D-Ring (Chin-Strap)
3
INNER LINING
1. Inner Pad
2. Cheek Pads <Thin>
3. Strap Covers
(Size Adjusting Pad × 1set)
3 -2
3 -3
3 -1
3 -2
3 -3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IXA Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kabuto IXA Series

  • Page 1 Be sure to read this manual before using the helmet. Keep the manual for future reference. Thank you for purchasing a KABUTO helmet. This manual explains how to use your KABUTO helmet correctly. Please take time to read this instruction manual before using the helmet, and keep the manual for future reference.
  • Page 2 1 D-RING STRAP ①Let the strap through the D ring, and D-RING STRAP pull the strap to the arrow direction to fasten it. ②Fasten the snaps to prevent looseness in the chinstrap. WARNING! Be sure to fasten the chin strap securely.
  • Page 3 ● This helmet is for bicycle use only. Do not use this helmet for motorcycle riding or any other activities. ● Please obey all traffic rules. OGK KABUTO CO., LTD. Products of 6-3-4, NAGATANISHI, HIGASHIOSAKA, OSAKA, 577-0016, JAPAN. www.ogkhelmet.com TEL:+81-6-6748-7806...
  • Page 4 シリーズ 取扱説明書 ご使用になる前に この取扱説明書は、 ご使用になる前に必ずお読みください。 また、 お読みの後は、 保管してくださいますようお願いいたします。 このたびは、 弊社製品をお買い上げいただき、 誠にありがとうございます。 この取扱説明書は、 ヘルメ ッ トの正しい取扱方法について説明しております。 ご使用前には必ず最後 までこの説明書をお読みいただき、 お読みの後は、 当説明書を大切に保管していただきますよう、 お 願いいたします。 ヘルメ ッ トは、 いかなる事故にも絶対という訳ではなく、 万一の際に危険の度合いを 減らす装備の一つで、 安全の一要素としてご理解のうえご使用ください。 安全快適なバイシクルライ フを楽しむためにも、 以下の注意事項をよく ご理解いただきますようお願いいたします。    ヘルメッ トの正しいかぶり方 ヘルメッ トの誤ったかぶり方 ヘルメットの先が ヘルメットの先が 上を向き、前頭部 まゆ毛のすぐ上に が見えている...
  • Page 5 Dリング あごひも あごひもの締め方 ①あごひもをDリングに通し、 矢印の方向に 引いて、 締めてください。 ②最後にあごひものバタ付きを防止するた めのスナップを止めます。 警 告: あごひもは必ずしっかりと締めてください。 締めないまま走行すると、 万一の転倒や事 スナップ 故の際に、 ヘルメッ トが脱落する可能性が あり、 大変危険です。 バイザーについて バイザーは、 3本の専用ビスを使って取り付けてください。 その際ビスは適度なトルクで締め、 定期的にビスを増締めしてください。 ご注意: 専用ビスは定期的にビスを増締めしてください。 緩んだまま使用すると走行中に脱落するおそれがあります。 内装パッ ドについて インナーパッ ド  ※同梱のサイズ調整パッ ドでお好みのサイズに調整ができます。 <取り外す場合> 額部分を手前に引いて外し、 後頭部にある 2箇所のスナップをゆっくり外すと完全に取り外せます。 <取り付ける場合> 先に額部分の芯材をシェルとライナーの間に差し込んでいき、 最後に後頭部にあるスナップ2箇所 を取り付けます。...
  • Page 6 警 告 : 下記の文章は必ずお読みください。 「ス トラップは必ずしっかり締めてください。 」 ス トラップを締めなかったり、 締め方がゆるいと、 万一転倒した時などに脱げてしまい、 頭 を守ることが出来ず非常に危険です。 また、 ヘルメッ トの下に、 帽子 ・ フード ・ バイザー ・ ヘッ ドフォン等を着用しないでください。 ヘルメ ッ トがずれたり、 落ちるおそれがあります。 「大きな衝撃を受けたヘルメッ トは外観上に損傷がなくても、 ご使用にならな いでください。 」 ヘルメ ッ トはシェルおよび衝撃吸収ライナーが潰れることで、 衝撃エネルギーを吸収し ます。 大きな衝撃を受けたヘルメ ッ トは、 既にライナーが潰れていることが多く、 そのま ま使用すると、...

Table of Contents