Monitoring; Address Table - 3Com 2426-PWR Installation And User Manual

used to detect if a new device is plugged into a
switch port. (Default: Disabled)
Max Count – The maximum number of hosts that
■
can connect to a port when the Multi-Host
operation mode is selected. (Range: 1-1024;
Default: 5)
Reauthentication Period – Sets the time period after
■
which a connected client must be re-authenticated.
(Range: 1-65535 seconds; Default: 3600 seconds)
Quiet Period – Sets the time that a switch port waits
■
after the Max Request Count has been exceeded
before attempting to acquire a new client. (Range:
1-65535 seconds; Default: 60 seconds)
Transmit Period – Sets the time period during an
■
authentication session that the switch waits before
re-transmitting an EAP packet. (Range: 1-65535;
Default: 30 seconds)
After you have filled in the parameters, click Apply to
save your changes.
Figure 64 802.1X Setup Screen

Monitoring

Using the Web interface, you can display address table
information, set up port mirroring, and perform cable
diagnostics.
The Monitoring menu includes three items:

Address Table

■
Port Mirroring
■
Cable Diagnostics
■
Address Table
The Switch's address table contains the MAC addresses
learned by monitoring the source address for traffic
Monitoring 69