3Com 2426-PWR Installation And User Manual page 96

96 A D: 3C CLI R
PPENDIX OM
Upgrade
The Upgrade command starts a system download and
thereby allowing a system upgrade.
Syntax
upgrade
Default Configuration
This command has no default configuration.
User Guidelines
The Upgrade command prompts the user for required
information. The TFTP server IP address and the software
image file name on the server must be specified.
During the upgrade process, a series of dots appear
representing the upgrade process in the CLI interface.
When the upgrade process is completed, the command
prompt reappears.
The Dual Software Image feature is supported, therefore
the next boot after the Upgrade command will always
use the newly downloaded image.
G
EFERENCE UIDE
Example
The following example upgrades the system software on
the Switch using a TFTP server:
Select menu option: upgrade
TFTP Server Address [192.168.1.254]: 192.168.1.9
File Name [runtime2.bix]: bfs00_00_00_11.bin
Software Upgrade has
begun...........................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
...........................
Upgrade Successful.
Select menu option: