and pull out the socket.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the license plate light cover.
& Dome light, map light and
cargo area light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the lens.
Maintenance and service
& Trunk light
1. Remove the cover by squeezing its
sides and pulling it.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the cover.
– CONTINUED –
11-55