Cruise Control Indicator Light - Subaru 2008 Impreza Owner's Manual

! To decrease the speed (by button)
Push the "SET/COAST" button and hold it
until the vehicle reaches the desired
speed. Then, release the button. The
vehicle speed at that moment will be
memorized and treated as the new set
speed.
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be lowered 1 mph (1.6 km/h) each time by
pressing the "SET/COAST" button quickly.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the "SET/COAST"
button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
& Cruise control indicator light
WRX STI
Starting and operating
Turbo models except WRX STI
Non-turbo models
The cruise control indicator light illumi-
nates when the ignition switch is turned to
the "ON" position and goes out after
approximately 3 seconds.
– CONTINUED –
7-51