Subaru 2008 Impreza Owner's Manual page 243

! Manual switch
Press the manual switch (the "AUTO-
MANU" switch) on the center console to
switch from auto mode to manual mode.
The "AUTO" indicator light in the combina-
tion meter will go off. Press the switch
again to go back to auto mode. The
"AUTO" indicator light in the combination
meter will illuminate.
! Center differential control switch
and indicator light
The control switch is located beside the
parking brake lever. By pushing the
control switch forward or pulling it rear-
ward, it is possible to change the initial
LSD torque.
The center differential indicator lights in
the combination meter give six levels of
indication. The indicator lights and control
switch are linked; when the switch is
pushed or pulled to change the initial
LSD torque, the illumination position of the
indicator lights changes accordingly.
Starting and operating
Push the switch forward to increase the
initial LSD torque; when the "LOCK"
indicator light illuminates, the initial LSD
torque setting is maximum. The center
differential will then be almost completely
locked.
– CONTINUED –
7-21