Headlight - Subaru 2001 Forester Owner's Manual

J Headlight
CAUTION
Halogen headlight bulbs become very hot while in use. If you
touch the bulb surface with bare hands or greasy gloves, finger
prints or grease on the bulb surface develop into hot spots, caus-
ing the bulb to break. If there are finger prints or grease on the
bulb surface, wipe them away with a soft cloth moistened with al-
cohol.
NOTE
If headlight aiming is required, consult your SUBARU dealer for
proper adjustment of the headlight aim.
Top mark
1. Disconnect the electrical connector, then remove the rubber cover.
2. Remove the retainer spring.
3. Replace the bulb, then set the retainer spring securely.
4. Install the rubber cover with the top mark facing up, then reconnect
the electrical connector.
Rubber cover
Electrical
connector
HS0328
Maintenance and service
Bulb
Retainer
spring
HS0327
– CONTINUED –
11-49