Before Use; Set Date And Time; Check For Dial Tone; Operating Range - VTech CS6314 User Manual

Battery
indicators
The screen The battery
is blank, or has no or
displays Put in
very little
charger and charge. The
flashes. handset
cannot be
used.
The screen The battery
displays has enough
charge to be
Low battery
used for a
and flashes.
short time.
The screen The battery
displays is charged.
HANDSET X.
When the battery is fully charged, you can
expect the following performance:
Operation
While in use (talking*)
While not in use (standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging nor in use.
Battery
Action
status
Charge
without
interruption
(at least 30
minutes).
Charge
without
interruption
(about 30
minutes).
To keep
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
Operating
time
Seven hours
Five days

Before use

After you install your telephone or power
returns following a power outage, the
handset will prompt you to set the date
and time.

Set date and time

1. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
2. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press q or p to choose AM or PM.
3. Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you have
changed your telephone service to
digital service from a cable company or
a VoIP service provider, the telephone
line may need to be rewired to allow
all existing telephone jacks to work.
Contact your cable/VoIP service
provider for more information.

Operating range

This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather,
and the layout of your home or office.
When the handset is out of range, the
handset displays Out of range or no pwr
at base.
5