Tag-Based Vlan Mode - Planet Networking & Communication FGSW-1816HPS User Manual

4.4.3.2 Tag-based VLAN Mode

The VLAN Port Configuration screen in
The page includes the following fields:
Object
 VID
 VLAN Member Port
 VID Source port
Buttons
: Click to apply changes
: Click to add the settings
: Click to delete the settings
Figure 4-4-6 appears.
Figure 4-4-6: Tag-based VLAN Port Configuration Page Screenshot
Description
Allow to assign PVID(Port VLAN ID) for selected port.
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must be the same as the VLAN ID whose port belongs to VLAN group, or
the untagged traffic will be dropped.
The range for the PVID is 1-4094.
Enable / Disable the selected port to join its VLAN member group
Enable / Disable the selected port to join its PVID group
User's Manual of FGSW-1816HPS
51