Table of Contents
Advertisement
I Information Display
Use the [AE LOCK/4] button to switch between
camera information display, GPS display and
turning off the display.
The GPS display displays information on the
0
recording location of the video being played
back only when GPS information has been
recorded.
The local date/time is displayed.
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
AE LOCK/4
Hide
+139.652172
AE LOCK/4
Oct 30,2016
07:01:58PM
GPS Display
.
Memo :
Trimming information is displayed while
0
trimming is in progress. You cannot switch the
display using the [AE LOCK/4] button during this
process.
J Date/Time Display
Displays the date/time that is recorded on the
currently played SD card.
Memo :
The date/time display style can be specified in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
34
0
dB
F1. 6
1/ 100
P 13000K
Camera Information
Display
AE LOCK/4
+35.483197
K Network Connection Icon a
When [Main Menu] B [System] B [Network] is
set to "On(SDI Off)" or "On(HDMI Off)", the
network connection status is displayed.
This icon is not displayed when "Off" is selected.
Icon
Connection is not established
(starting up, preparing for
connection)
.
(Blink)
Connection is not established
(preparing for connection)
.
(Yellow)
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
L Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
※
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E DD 2 0
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in [TC/UB]
of [Main Menu] B [LCD/VF] B [Display
Settings].
Status
Advertisement
Table of Contents
