Alarm - Panasonic KX-TGE720E Operating Instructions Manual

Programming
Main menu: "Baby Monitor"
Sub-menu 1
On/Off
Sensitivity Level
Main menu: "Caller List"
Operation
Viewing the caller list.
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TGE722/KX-TGE723)
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 KX-TGE722/KX-TGE723
*5 The preset melodies in this product are used with permission of © 2012 Copyrights Vision
Inc.
*6 If you do not want the unit to ring before the caller information is received, set to "Off".
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*7 This menu is not displayed when repeater mode is set to "On".
*8 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*10 To prevent other users from joining your conversations with outside callers, turn this feature
on. (KX-TGE722/KX-TGE723)

Alarm

An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
28
TGE72xE_0221_ver005.pdf 28
Sub-menu 2
–
–
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Settings
On
<Off>
Low
<Middle>
High
Important:
R Make sure the unit's date and time setting
is correct (page 14).
1
MMENUN#720
2
MbN: Select the desired alarm. a MOKN
3
MbN: Select the desired alarm option. a
MOKN
"Off"
Turns alarm off. Go to step 9.
Code
#268 31
#269 32
Code
#213 35
2019/02/21 14:47:46