Table of Contents
Advertisement
The active cursor position flashes
. . . switch between cursor positions with
Enter date:
¤
. . . using
enter the day, month and year in 8-digit format.
Enter time:
¤
. . . using
enter hours and minutes in 4-digit format.
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the End call key
The telephone is now ready for use.
Connecting the headset
¤
Remove cover from the left side of the handset.
¤
Connect headset with 2.5 mm headphone jack
¤
Replace cover after use.
The headset volume corresponds to the setting for the
receiver volume.
Connecting the USB data cable
For data exchange between the handset and PC:
¤
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
Connect the handset directly to the PC, not via a
USB hub.
. . . change cursor position with
.
1
.
1
Handset
Date/Time
Date:
15.08.2018
Time:
00:00
Back
1
1
Save
11
Advertisement
Table of Contents
