Table of Contents
Advertisement
Handset
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The batteries are fully charged when the power icon
disappears from the display.
Batteries may heat up during charging. This is not dangerous.
After a time, the charging capacity of the batteries will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however (indicated by "Please register hand-
set"), register the handset manually (
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
¤
Press the keys
language settings display appears, the set language
(e. g. English) is highlighted (
¤
To select a different language:
the desired language is highlighted on the display,
e. g. Francais
press the key on the right directly underneath the display to activate the
language.
¤
To revert to idle status:
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
¤
Press the display key Time
or, if the date and time have already been set:
¤
. . . use
OK
10
.
and
slowly and successively . . . the
= selected).
Press the control key
Press and hold the End call key
to select
Settings
p. 48).
until
OK
Date/Time
8 h
Deutsch
English
Francais
Calls
Time
Advertisement
Table of Contents
