Control Panel And Display - Hitachi SF-140XA Operating & Installation Instructions Manual

Power button
Start/Pause button
Shower Plus button
Water Power button
Program button
Wash button
Rinse button
Spin button
Water Level button
Delay Timer button
6

Control Panel and Display

Press this button to switch power on and off. The washing machine
automatically switches off when operations are fi nished. The washing
machine also turns off automatically if it is not operated or no button is
pressed for 10 minutes after the power has been turned on.
* Push this button a little longer than other buttons (around 1 second)
Starts and pauses operation. When the washing machine is paused for
over one hour and no operations are done, it turns off automatically.
Supplies water to the tub when this button is pressed. Amount of water
supplied depends on load amount or program. If you want to cancel water
supply, press this button again.
This function is available during the washing and normal rinsing processes.
This button does not function if the water level has already reached
highest level of each program.
Changes the strength of the water fl ow. The strength of the water fl ow
changes each time this button is pressed.
Water fl ow strength is shown on the indicator.
(0: normal, 1: strong, 2: stronger, -1: weak, -2: weaker)
This function is available during the washing and normal rinsing
processes.
Selects programs. The program changes each time the button is pressed.
Changes the washing time. The washing time can be set between 3 and
24 minutes.
Changes the number and type of rinses.
Changes the spin time. The spin time can be set between one and
9 minutes.
Changes the water level.
The delay time can be set between 3 and 12 hours.
display
* example of control panel
Select program
Indicator