In Case Of Power Outage; Care And Maintenance - Hitachi SF-140XA Operating & Installation Instructions Manual

Partial Operations Using the Fuzzy Program
■
You can set the wash time each
time you press the Wash button
in a range from 3 to 24 minutes
and no washing.
24 Min
18 Min
15 Min
12 Min
9 Min
3 Min
(No washing)
If there is a
power outage
Cleaning
the lint fi lter
(cassette type)
■
You can set the number and
type of rinses by pressing the
Rinse button. Each time you
press the Rinse button the
setting changes in sequence,
from Normal Rinse 2 times,
Water-Injection Rinse 2 times,
Normal Rinse 3 times,
Water-Injection Rinse 3 times,
no rinsing, Normal Rinse 1 time,
Water-Injection Rinse 1 times.
(No rinsing)

In Case of Power Outage

The washing machine is equipped with a restart function.
If a power outage occurs while the washing machine is operating, the
cycle (i.e., wash, rinse, or spin) at that time is saved, and when the power
is restored, automatically restart from the interrupted cycle.
If there is a power outage during the operation, the lid is locked and
cannot be opened. After the power is restored, the lock is released.

Care and Maintenance

1. Press down on the knob on the top of the lint filter (cassette type)
and pull it towards you.
2. Open the lint filter (cassette type) to the sides and remove the lint
that is inside.
3. Reverse the procedure to replace the lint filter (cassette type).
1.
■
You can set the spin time each
time you press the Spin button
in a range of 1 to 9 minutes and
no spinning.
Ex 3
3
Ex 2
2
Ex 1
1
2.
9 Min
6 Min
3 Min
1 Min
(No spinning)
3.
21