Page 1: Table Of Contents
2004 Pontiac Grand Prix Owner Manual Seats and Restraint Systems ... 1-1 Front Seats ... 1-2 Rear Seats ... 1-8 Safety Belts ... 1-10 Child Restraints ... 1-29 Air Bag Systems ... 1-48 Restraint System Check ... 1-56 Features and Controls ... 2-1 Keys ...
Page 2: How To Use This Manual
GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name GRAND PRIX are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
Page 3 Safety Warnings and Symbols You will ﬁnd a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. CAUTION: These mean there is something that could hurt you or other people.
Page 4 Vehicle Damage Warnings Also, in this book you will ﬁnd these notices: Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly.
Page 5 These are some examples of vehicle symbols you may ﬁnd on your vehicle:...
Page 6 NOTES...
Page 7: Seats And Restraint Systems
Section 1 Front Seats ...1-2 Manual Seats ...1-2 Power Seat ...1-4 Power Lumbar ...1-5 Heated Seats ...1-5 Reclining Seatbacks ...1-6 Head Restraints ...1-7 Rear Seats ...1-8 Split Folding Rear Seat ...1-8 Safety Belts ...1-10 Safety Belts: They Are for Everyone ...1-10 Questions and Answers About Safety Belts ...1-14 How to Wear Safety Belts Properly ...1-15 Driver Position ...1-15...
Page 8: Front Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to.
Page 9 Fold-Flat Front Passenger Seat CAUTION: If you fold the seatback forward to carry longer objects, such as skis, be sure any such cargo is not near an air bag. In a crash, an inﬂating air bag might force that object toward a person.
Page 10: Power Seat
Power Seat If your vehicle has this feature, the control is located on the outboard side of the driver’s seat. To adjust the seat do the following: • Move the seat forward or rearward by sliding the control toward the front or rear of the vehicle. •...
Page 11: Power Lumbar
Power Lumbar If your vehicle has this feature, the power lumber control lets you adjust the amount of support in the lower seatback. The four-way control is located on the outboard side of the driver’s seat cushion. To increase or decrease lumbar support, press and hold the front or rear of the control.
Page 12: Reclining Seatbacks
Reclining Seatbacks The recliner levers for the driver’s and passenger’s front seatbacks are located on the outboard side of each front seat cushion. Lift the lever to release the seatback, then move the seatback to where you want it. Release the lever to lock the seatback in place.
Page 13: Head Restraints
CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.
Page 14: Rear Seats
Rear Seats Split Folding Rear Seat You can fold either side or both sides of the seatback down in your vehicle for more cargo space. Make sure the front seat isn’t reclined. If it is, the rear seatback may not fold down all the way. To lower the rear seatback, follow these steps: 1.
Page 15 CAUTION: If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. CAUTION: A safety belt that is improperly routed, not properly attached, or twisted won’t provide the protection needed in a crash.
Page 16: Safety Belts
Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly.
Page 17: Why Safety Belts Work
In most states and in all Canadian provinces, the law says to wear safety belts. Here’s why: They work . You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person wouldn’t survive.
Page 18 Put someone on it. 1-12 Get it up to speed. Then stop the vehicle. The rider doesn’t stop.
Page 19 The person keeps going until stopped by something. or the instrument panel... In a real vehicle, it could be the windshield... 1-13...
Page 20: Questions And Answers About Safety Belts
or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-14 Questions and Answers About Safety Belts...
Page 21: How To Wear Safety Belts Properly
If I’m a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you’re in an accident – even one that isn’t your fault – you and your passengers can be hurt.
Page 22 3. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.
Page 23: Shoulder Belt Height Adjuster
The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 24 What’s wrong with this? The shoulder belt is too loose. It won’t give nearly as much protection this way. 1-18 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body.
Page 25 What’s wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 26 What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 1-20 CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 27 What’s wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 28: Safety Belt Use During Pregnancy
To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 29: Rear Seat Passengers
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 30 Lap-Shoulder Belt All rear seat positions have lap-shoulder belts. Here’s how to wear one properly. 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly.
Page 31 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 32 Rear Safety Belt Comfort Guides for Children and Small Adults Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head.
Page 33 2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies ﬂat. The elastic cord must be under the belt and the guide on top.
Page 34: Safety Belt Pretensioners
4. Buckle, position and release the safety belt as described in Rear Seat Passengers on page 1-23 . Make sure that the shoulder belt crosses the shoulder. To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides.
Page 35: Child Restraints
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. What is the proper way to wear safety belts? If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 36 1-30 CAUTION: Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck?
Page 37 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part isbehind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 38: Infants And Young Children
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 39 CAUTION: (Continued) it. For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (110 kg) force on a person’s arms. A baby should be secured in an appropriate restraint. CAUTION: Children who are up against, or very close to, any air bag when it inﬂates can be seriously...
Page 40 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
Page 41: Child Restraint Systems
CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
Page 42 A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. 1-36 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
Page 43 A booster seat (F-G) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a ﬁve-point harness. A booster seat can also help a child to see out the window.
Page 44: Where To Put The Restraint
When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may ﬁnd these instructions on the restraint itself or in a booklet, or both.
Page 45: Top Strap
Top Strap Some child restraints have a top strap, or “top tether”. It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored.
Page 46: Top Strap Anchor Location
Anchor the top strap to an anchor point speciﬁed in Top Strap Anchor Location on page 1-40 . Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed.
Page 47 Lower Anchorages and Top Tethers for Children (LATCH System) Your vehicle has the LATCH system. You’ll ﬁnd anchors (A) in all three rear seating positions. Each seating position with the LATCH system will have the LATCH symbol on the seatbacks above the anchors.
Page 48 With this system, use the LATCH system instead of the vehicle’s safety belts to secure a child restraint. 1-42 CAUTION: If a LATCH-type child restraint isn’t attached to its anchorage points, the restraint won’t be able to protect the child correctly. In a crash, the child could be seriously injured or killed.
Page 49: Securing A Child Restraint Designed For The Latch System
Securing a Child Restraint Designed for the LATCH System 1. Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2. Put the child restraint on the seat. 3.
Page 50 3. Buckle the belt. Make sure the release button is 4. Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. safety belt quickly if you ever had to. 1-44...
Page 51: Securing A Child Restraint In The Right Front Seat Position
5. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. If you’re using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 52 Your vehicle has a right front passenger air bag. Never put a rear-facing child restraint in this seat. Here’s why: CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inﬂates. This is because the back of the rear-facing child restraint would be very close to the inﬂating air bag.
Page 53 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. You may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 54: Air Bag Systems
Air Bag Systems This part explains the air bag systems. Your vehicle has air bags – one air bag for the driver and another air bag for the right front passenger. Your vehicle may also have roof-mounted side impact air bags; one for the driver and the passenger directly behind the driver and one for the right front passenger and the person seated directly behind that passenger.
Page 55 CAUTION: Both frontal and side impact air bags inﬂate with great force, faster than the blink of an eye. If you’re too close to an inﬂating air bag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position for air bag inﬂation before and during a crash.
Page 56: Where Are The Air Bags
There is a air bag readiness light on the instrument panel which shows the air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-34 for more information.
Page 57 The right front passenger’s air bag is in the instrument panel on the passenger’s side. The side impact air bag for the driver and the person seated directly behind the driver is in the ceiling above the side windows. 1-51...
Page 58 The side impact air bag for the right front passenger and the person seated directly behind that passenger is in the ceiling above the side windows. 1-52 CAUTION: If something is between an occupant and an air bag, the bag might not inﬂate properly or it might force the object into that person causing severe injury or even death.
Page 59: When Should An Air Bag Inﬂate
When Should an Air Bag Inﬂate? The driver’s and right front passengers frontal air bags are designed to deploy only in moderate to severe frontal, or near-frontal crashes. But they are designed to inﬂate only if the impact speed is above the system’s designed “threshold level.”...
Page 60: How Does An Air Bag Restrain
How Does an Air Bag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle.
Page 61 CAUTION: When an air bag inﬂates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so.
Page 62: Restraint System Check
Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag system in several places around your vehicle. You don’t want the system to inﬂate while someone is working on your vehicle. Your dealer and the service manual have information about servicing your vehicle and the air bag system.
Page 63: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
Page 64 NOTES 1-58...
Page 65: Features And Controls
Section 2 Keys ...2-2 Remote Keyless Entry System ...2-4 Remote Keyless Entry System Operation ...2-5 Doors and Locks ...2-7 Door Locks ...2-7 Power Door Locks ...2-8 Last Door Closed Locking ...2-8 Programmable Automatic Door Locks ...2-9 Lockout Protection ...2-9 Leaving Your Vehicle ...2-9 Trunk ...2-10 Windows ...2-12 Power Windows ...2-13...
Page 66: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.
Page 67 See PASS-Key on page 2-15 for more information on programming your new key. In an emergency, contact Pontiac Roadside Assistance. See Roadside Assistance Program on page 7-6 for more information. Notice: Your vehicle has a number of features that can help prevent theft.
Page 68: Remote Keyless Entry System
Remote Keyless Entry System Your keyless entry system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 69: Matching Transmitter(S) To Your Vehicle
Remote Keyless Entry System Operation You can lock and unlock the doors or unlock the trunk of the vehicle from about 3 feet (1 m) up to 30 feet (9 m) away with the remote keyless entry transmitter. LOCK: Press the LOCK button to lock all the doors. Pressing the LOCK button may arm the content theft-deterrent system.
Page 70: Battery Replacement
Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about three years. You can tell the battery is weak if the transmitter won’t work at the normal range. If you have to get close to your vehicle before the transmitter works, it’s probably time to change the battery.
Page 71: Doors And Locks
Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it. You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked.
Page 72 Power Door Locks To lock or unlock all doors from inside the vehicle, use the power door lock switch located on either front door. Move the switch on the driver’s door to the right to lock or to the left to unlock the doors. Move the switch on the passenger’s door to the left to lock or to the right to unlock the doors.
Page 73: Programmable Automatic Door Locks
Programmable Automatic Door Locks All of the doors will lock automatically when the shift lever is moved out of PARK (P). All doors will unlock automatically when the ignition is turned off while the shift lever is in PARK (P). If you prefer to have your doors unlocked automatically at any time, see DIC Controls and Displays on page 3-45 for more information.
Page 74: Trunk Lock
Trunk CAUTION: It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death. If you must drive with the trunk lid open or if electrical wiring or other cable connections must pass through the seal between the body and the trunk lid:...
Page 75 Trunk Assist Handle The trunk assist handle is located inside the trunk lid toward the driver’s side of the vehicle. Notice: The trunk assist handle is not designed to be used to tie down the trunk lid or as an anchor point when securing items in the trunk.
Page 76: Windows
Windows CAUTION: Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 77: Window Lock-Out
Power Windows Use the switches on the driver’s door armrest to operate each of the windows. Push the switch rearward to open or forward to close the window. The top switches operate the front windows, and the bottom switches operate the rear windows. Each passenger door also has a switch that operates that window.
Page 78: Theft-Deterrent Systems
Theft-Deterrent Systems Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Content Theft-Deterrent Your vehicle has a theft-deterrent alarm system. A red light located on top of the instrument panel, toward the center of the...
Page 79: Disarming With Your Key
Arming with the Remote Keyless Entry Transmitter The alarm system will arm when you use the remote keyless entry transmitter to lock the doors after the key is removed from the ignition. The red light will turn on to let you know the system is arming. After all doors are closed and locked, the red light will begin ﬂashing at a very slow rate to let you know the system is armed.
Page 80 If your vehicle does start, the ﬁrst key may be faulty. See your dealer who can service the PASS-Key key made. In an emergency, contact Pontiac Roadside Assistance. See Roadside Assistance Program on page 7-6 for more information.
Page 81 Canadian Owners: If you lose or damage your keys, only a GM dealer can service PASS-Key have new keys made. To program additional keys, you will need two current driver’s keys. You must add a step to the following procedure. After Step 2, repeat Steps 1 and 2 with the second current driver’s key.
Page 82: Starting And Operating Your Vehicle
Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle doesn’t need an elaborate “break-in.” But it will perform better in the long run if you follow these guidelines: • Don’t drive at any one speed — fast or slow —...
Page 83: Retained Accessory Power (Rap)
Notice: If your key seems stuck in OFF and you can’t turn it, be sure you are using the correct key; if so, is it all the way in? If it is, then turn the steering wheel left and right while you turn the key hard.
Page 84: Engine Coolant Heater
3. If it doesn’t start within 10 seconds, hold your key in START for about 10 seconds at a time until your engine starts. Wait about 15 seconds between each try. 4. If your engine still won’t start (or starts but then stops), it could be ﬂooded with too much gasoline.
Page 85: To Use The Engine Coolant Heater
To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The cord is located above the engine air cleaner/ﬁlter. See Engine Compartment Overview on page 5-12 for more information on location. 3.
Page 86: Automatic Transaxle Operation
Automatic Transaxle Operation The automatic transaxle has a shift lever on the console between the seats. Maximum engine speed is limited when your vehicle is in PARK (P) or NEUTRAL (N) to protect driveline components from improper operation. 2-22 There are several different positions for the shift lever. PARK (P): This position locks the front wheels.
Page 87 Make sure the shift lever is fully in PARK (P) before starting the engine. The vehicle has an automatic transaxle shift lock control system. You must fully apply the regular brakes and press the shift control button located on the front of the shift lever, before you can shift from PARK (P) when the ignition is in RUN.
Page 88 AUTOMATIC OVERDRIVE (D): This position is for normal driving. If you need more power for passing, and you’re: • Going less than 35 mph (55 km/h), push your accelerator pedal about halfway down. • Going about 35 mph (55 km/h) or more, push the accelerator pedal all the way down.
Page 89: Performance Shifting With Tap-Shift
FIRST (1): This position gives you even more power but lower fuel economy than SECOND (2). You can use it on very steep hills, or in deep snow or mud. If the shift lever is moved to FIRST (1), the transaxle won’t shift into ﬁrst gear until the vehicle is going slowly enough.
Page 90 While in the MANUAL (M) mode, push either paddle once to up-shift to the next gear. Pull either paddle once to down-shift to the next gear. To fully use the system, select MANUAL (M) while stopped, with the engine running. The vehicle will begin moving in ﬁrst gear upon acceleration.
Page 91: Parking Brake
Parking Brake The parking brake is located to the left of the brake pedal near the driver’s door. To set the parking brake, hold the regular brake pedal down with your right foot. Push down on the parking brake pedal, with your left foot.
Page 92: Shifting Into Park (P)
Shifting Into Park (P) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 93: Torque Lock
Leaving Your Vehicle With the Engine Running CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch ﬁre.
Page 94: Shifting Out Of Park (P)
Shifting Out of Park (P) Your vehicle has an automatic transaxle shift lock control system which locks the shift lever in PARK (P) when the ignition is in the OFF position. In addition, you have to fully apply your regular brakes before you can shift from PARK (P) when the ignition is in RUN.
Page 95: Engine Exhaust
Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: • Your exhaust system sounds strange or different. •...
Page 96: Running Your Engine While You Are Parked
Running Your Engine While You Are Parked It’s better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
Page 97: Mirrors
Mirrors Manual Rearview Mirror Use the control, located at the bottom, to change the mirror from the day to the night position. To reduce glare from headlamps behind you while driving at night, turn the control to the right. To return the mirror back to the day position, turn the control to the left.
Page 98 Outside Power Mirrors The power mirror controls are located near the driver’s window, on the driver’s door armrest. Move the top control to the left to adjust the driver’s side outside mirror. Move the control to the right to adjust the passenger’s side mirror. The center position turns the power control off and will not allow the mirrors to move if the control pad is touched.
Page 99: Onstar System
® OnStar System ® OnStar uses global positioning system (GPS) satellite technology, wireless communications, and call centers to provide you with a wide range of safety, security, information and convenience services. An OnStar subscription plan is included in the price of your vehicle. You can upgrade or extend your OnStar meet your needs.
Page 100: Storage Areas
® OnStar Personal Calling ® With OnStar Personal Calling, you have a safer way to stay connected while driving. It’s a hands-free wireless phone that’s integrated into your vehicle. You can place calls nationwide using voice-activated dialing with no contracts, no roaming charges and no access fees. ®...
Page 101: Sunglasses Storage Compartment
Sunglasses Storage Compartment If the vehicle does not have a sunroof, it may have a storage compartment located to the rear on the overhead console. To open the sunglasses storage compartment, press the release latch forward and pull the compartment down to the full open position. Front Seat Storage Net If the vehicle is equipped with a fold-ﬂat front...
Page 102: Assist Handles
Assist Handles The vehicle has lighted assist handles located above the rear doors. They can be used to help passengers enter and exit the vehicle. The lamps on the handles will come on automatically when a door is opened and turn off when the door is closed.
Page 103: Sunroof
Sunroof Your vehicle may be equipped with a sunroof. The sunroof includes a sliding glass panel and a sunshade. The switch to control the sunroof is located in the headliner. The switch works only while the ignition is on or RAP is active. See Ignition Positions on page 2-18 . Vent: Open the sunshade by hand.
Page 104 NOTES 2-40...
Page 105: Instrument Panel
Section 3 Instrument Panel Overview ...3-2 Hazard Warning Flashers ...3-4 Other Warning Devices ...3-5 Horn ...3-5 Tilt Wheel ...3-5 Windshield Washer Lever ...3-6 Cruise Control Lever ...3-8 Exterior Lamps ...3-12 Interior Lamps ...3-16 Head-Up Display (HUD) ...3-19 Accessory Power Outlets ...3-23 Ashtrays and Cigarette Lighter ...3-24 Climate Controls ...3-25 Climate Control System ...3-25...
Page 106: Instrument Panel Overview
Instrument Panel Overview...
Page 107 The main components of the instrument panel are the following: A. Side Window Defogger Outlets. (See Outlet Adjustment on page 3-29 .) B. Instrument Panel Outlets. (See Outlet Adjustment on page 3-29 .) C. Exterior Lamps Control. (See Exterior Lamps on page 3-12 .) D.
Page 108: Hazard Warning Flashers
Hazard Warning Flashers Your hazard warning ﬂashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will ﬂash on and off. The hazard warning ﬂasher button is located on top of the steering column.
Page 109: Other Warning Devices
Other Warning Devices If you carry reﬂective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Horn Press the vehicle’s steering wheel pad to sound the horn. Tilt Wheel A tilt steering wheel allows you to adjust the steering wheel before you drive.
Page 110: Windshield Washer Lever
Windshield Washer Lever Windshield Wipers (Windshield Wipers): The lever with this symbol, located on the right side of the steering column, operates the windshield wipers. (Off): Lower the lever to its original position to turn the wipers off. & (Delay): Push the lever up once to this position to set a delay between wipes.
Page 111: Windshield Washer
(Mist): For a single wiping cycle, push the lever down once and let go. The wipers will stop after one cycle. For additional cycles, hold the lever down. Be sure to clear ice and snow from the wiper blades before using them. If they’re frozen to the windshield, gently loosen or thaw them.
Page 112: Cruise Control
Cruise Control Lever Cruise Control CAUTION: • Cruise control can be dangerous where you can’t drive safely at a steady speed. So, don’t use your cruise control on winding roads or in heavy traffic. • Cruise control can be dangerous on slippery roads.
Page 113 With cruise control, you can maintain a speed of approximately 25 mph (40 km/h) or more without keeping your foot on the accelerator. This is helpful on long trips. Cruise control does not work at speeds below about 25 mph (40 km/h). When you apply your brakes, the cruise control shuts off.
Page 114 This symbol, along with the mph (km/h) and the CRUISE SET message, will appear in the DIC when cruise is set. This message will disappear when you brake or cancel the cruise control. It will reappear when set speed is resumed.
Page 115 Reducing Speed While Using Cruise Control There are two ways to reduce your speed while using cruise control: • Push the lever downward toward the minus (set/coast/decelerate) position until you reach the lower speed you want, then release it. • To slow down in very small amounts, push the lever downward toward the minus (set/coast/decelerate) position brieﬂy.
Page 116: Exterior Lamps
Exterior Lamps Exterior Lamp Control Lever The lever on the left side of the steering column operates the exterior lamps. : Turn the outside band on the lever with this symbol to operate the exterior lamps, except for the fog lamps. 3-12 Turn the outside band to turn the headlamps off.
Page 117 Fog Lamps Fog lamps provide brighter roadway lighting for better vision in foggy or misty conditions. (Fog Lamps): Turn the second band on the exterior lamps lever to this position to turn the fog lamps on. The band will return to its original position. This symbol will appear on the instrument panel cluster when the fog lamps...
Page 118: Flash-To-Pass Feature
Flash-To-Pass Feature This feature allows you to use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the exterior lamps control lever toward you to use this feature. When you do, the following will occur: •...
Page 119: Daytime Running Lamps
Turn Signal On Chime If the turn signal is left on for approximately 1 mile (1.61 km), a warning chime will sound and the TURN SIGNAL ON warning message will appear on the Driver Information Center (DIC) display. See “Turn Signal On”...
Page 120: Interior Lamps
Light Sensor The light sensor for the DRL and AUTO headlamps feature is located on top of the instrument panel. If you cover the sensor, it will read “dark,” and the headlamps will turn on to full brightness. Exterior Lighting Battery Saver If the parking lamps or headlamps have been left on, the exterior lamps will turn off approximately 10 minutes after the ignition is turned to OFF.
Page 121: Courtesy Lamps
Courtesy Lamps When a door is opened, the courtesy lamps will automatically come on. You can also turn these lamps on by manually turning the interior lamps control all the way to the right. Entry Lighting The entry lighting feature lights the interior of the vehicle before you enter.
Page 122: Delayed Exit Lighting
Delayed Exit Lighting For exiting the vehicle at night, the vehicle is equipped with the delayed exit lighting feature. The interior lamps will light for up to 25 seconds when you remove the key from the ignition. After 25 seconds have elapsed, the interior lamps will slowly fade out.
Page 123: Battery Run-Down Protection
Battery Run-Down Protection Your vehicle has a feature to help prevent you from draining the battery in case you accidentally leave the interior, trunk or underhood lamps on. If you leave any of these lamps on while the ignition is in LOCK or OFF, they will automatically turn off after 10 minutes.
Page 124 The HUD information can be displayed in three languages, English, French and Spanish. Language selection is done through the trip computer in the Driver Information Center (DIC). See DIC Controls and Displays on page 3-45 . When you sit up in your seat, the HUD image will appear straight ahead on the windshield, near the front bumper.
Page 125 When the HUD is on, the speedometer reading will be displayed continually. The current radio station or CD track number will only be displayed for three seconds after the radio or CD track status changes. This will happen whenever one of the radio controls is pressed.
Page 126: If The Hud Image Is Not Clear
The HUD will “remember” the last display format selected. When the vehicle is started if the last format displayed was Format One or Format Three, then Format One will be displayed. If the last format was Format Two, then Format Two will be displayed.
Page 127 Accessory Power Outlets The vehicle has two 12-volt outlets which can be used to plug in electrical equipment such as a cellular telephone, a compact disc player, etc. One accessory power outlet is located on the center console, below the front edge of the storage console. The other is located inside the console.
Page 128: Cigarette Lighter
Ashtrays and Cigarette Lighter Notice: Don’t put papers or other ﬂammable items into your ashtrays. Hot cigarettes or other smoking materials could ignite them, causing a damaging ﬁre. Ashtray The ashtray is located to the right of the transaxle shift lever on the center console.
Page 129: Climate Controls
Climate Controls Climate Control System Manual Climate Control System The climate control system allows you to manually control the heating, cooling and ventilation for the vehicle. (Fan): Turn the knob by this symbol, located on the left side of the climate control panel, clockwise or counterclockwise to increase or decrease the fan speed.
Page 130: Defogging And Defrosting
(Floor): This mode directs most of the air to the ﬂoor outlets with some air directed toward the side window outlets and a little air directed to the windshield. In this mode, the system will automatically use outside air. The air conditioning compressor will be engaged unless the outside temperature is 40°...
Page 131: Air Conditioning
Temperature The knob on the right of the climate control panel is the temperature adjustment that can be used with any of the climate control modes. Turn the knob clockwise for warmer settings and counterclockwise for colder settings. Air Conditioning (Air Conditioner): Press this button on the climate control panel to turn the air-conditioning system on or off.
Page 132 Recirculation (Recirculation): Press this button on the climate control panel to activate the recirculation mode. With this selection inside air is recirculated into the vehicle along with some outside air. This mode reduces outside air and odors from entering your vehicle. It may also help to heat or cool the air inside your vehicle more quickly.
Page 133: Outlet Adjustment
Outlet Adjustment Rotate and turn the air outlets, located in the middle and at each outboard side of the instrument panel, to adjust the direction of the airﬂow. See Instrument Panel Overview on page 3-2 for additional information on location. Operation Tips •...
Page 134 To change the passenger compartment air ﬁlter, do the following: 1. Put the ignition in ACCESSORY and turn the windshield wipers on. 2. Turn the ignition to off when the windshield wipers are in the upright position. 3. Raise the hood. 4.
Page 135: Warning Lights, Gages And Indicators
Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Page 136: Instrument Panel Cluster
Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel is in your tank and many other things you need to drive safely and economically. United States version shown, Canada similar Your vehicle is equipped with this cluster or one very similar to it.
Page 137: Speedometer And Odometer
Speedometer and Odometer The speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer, located on the Driver Information Center (DIC) display, shows how far your vehicle has been driven, in either miles or kilometers. See DIC Controls and Displays on page 3-45 for more information.
Page 138: Safety Belt Reminder Light
Safety Belt Reminder Light When the key is turned to RUN or START, a chime will come on for several seconds to remind people to fasten their safety belts, unless the driver’s safety belt is already buckled. The safety belt light will also come on and stay on for several seconds, then it will ﬂash for...
Page 139: Up-Shift Light
CAUTION: If the air bag readiness light stays on after you start your vehicle, it means the air bag system may not be working properly. The air bags in your vehicle may not inﬂate in a crash, or they could even inﬂate without a crash. To help avoid injury to yourself or others, have your vehicle serviced right away if the air bag readiness light stays on after you start your...
Page 140: Brake System Warning Light
Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two parts. If one part isn’t working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the warning light comes on, there is a brake problem. Have your brake system inspected right away.
Page 141 Anti-Lock Brake System Warning Light If your vehicle has the Anti-lock Brake System (ABS), this light will come on when your engine is started and may stay on for several seconds. That’s normal. If the ABS warning light comes on and stays on, there may be a problem with the anti-lock portion of the brake system.
Page 142: Enhanced Traction System Warning Light
Traction Control System (TCS) Warning Light If your vehicle has a 3800 V6 supercharged engine, it may have the Traction Control System (TCS). This light may come on for the following reasons: • If you turn the system off by pressing the TC (traction control) button located on the center console, the light will come on and stay on.
Page 143: Engine Coolant Temperature Warning Light
Engine Coolant Temperature Warning Light This light tells you that the engine coolant has overheated or the radiator cooling fan is not working. If you have been operating the vehicle under normal driving conditions, you should pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Page 144 Malfunction Indicator Lamp Check Engine Light Your vehicle is equipped with a computer which monitors operation of the fuel, ignition and emission control systems. This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment.
Page 145: If The Light Is On Steady
This light should come on, as a check to show you it is working, when the ignition is on and the engine is not running. If the light doesn’t come on, have it repaired. This light will also come on during a malfunction in one of two ways: •...
Page 146 Did you just drive through a deep puddle of water? If so, your electrical system may be wet. The condition will usually be corrected when the electrical system dries out. A few driving trips should turn the light off. Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel.
Page 147: Oil Pressure Light
Oil Pressure Light If you have a problem with your oil pressure, this light may stay on after you start the engine, or it may come on while you are driving. This indicates that oil is not going through your engine quickly enough to keep it lubricated.
Page 148: Fog Lamp Light
Fog Lamp Light This light will come on when the fog lamps are in use. The light will go out when the fog lamps are turned off. See “Fog Lamps” under Exterior Lamps on page 3-12 for more information. High-Beam On Light This light comes on whenever the high-beam headlamps are on.
Page 149: Driver Information Center (Dic)
Driver Information Center (DIC) The Driver Information Center (DIC) gives you important safety and maintenance facts. When you turn the ignition on, all of the DIC lights illuminate for a few seconds and the phrase WIDETRACK GP will appear. After this, the DIC will begin working.
Page 150 Press the trip odometer button again to access TRIP A. Press the trip odometer button again to access TRIP B. To reset the trip odometer(s) back to zero miles or kilometers, access the trip you want to reset and press the set/reset button.
Page 151 4. Press the options button to advance to the months of the year. 5. Press the set/reset button to scroll through the months of the year, releasing the button when the correct month appears. 6. Press the options button to advance to the days of the month.
Page 152 ENGINE OIL MONITOR SYSTEM: This menu lets you reset the engine oil monitor system for the vehicle. See “When to Change Engine Oil (GM Oil LIfe System)” under Engine Oil on page 5-16 . To reset the engine oil monitor system use the following procedure: 1.
Page 153 INTERIOR LIGHTS WHEN DOOR CLOSED: This screen lets you select this feature to be turned OFF or ON. If OFF is selected, the interior lamps will turn off immediately when the ignition is OFF and the last door is closed. If ON is selected, the interior lamps will stay on for about 25 seconds after the vehicle’s ignition is off and the last door is closed.
Page 154 AUTO DOOR UNLOCK: This screen can be used if ON was selected for the AUTO DOOR LOCK feature. This screen lets you select this feature to be turned off, used for the driver’s door only, or for all the doors. If OFF is selected, none of the doors will unlock when the vehicle’s transaxle is shifted into PARK (P).
Page 155 REMOTE LOCKS FEEDBACK: This screen lets you select this option to be turned OFF, or lets you choose from two methods of veriﬁcation, LIGHTS or LIGHTS and HORN, that indicate the vehicle’s doors are locked when the LOCK button on the remote keyless entry transmitter is pressed.
Page 156 KEY CYLINDER DISARM: If the vehicle has a content theft-deterrent system this screen lets you select this feature to be turned OFF or ON. If OFF is selected, the content theft-deterrent system will not disarm when the vehicle is unlocked using the door lock –...
Page 157: Uplevel Dic With Trip Computer
Uplevel DIC with Trip Computer The Driver Information Center (DIC) control buttons and the message display screen are located above the radio. The DIC gives you important safety and maintenance facts concerning the vehicle. The status of many of the vehicle’s systems along with driver personalization menus and warning messages about your vehicle’s systems may display on the DIC screen.
Page 158 OIL LIFE REMAINING: Press the gage button until OIL LIFE REMAINING is displayed. This screen indicates the percentage of oil life in the vehicle’s engine that has not degraded. If the screen indicates 99% OIL LIFE REMAINING, this means that 99 percent of the current oil life remains.
Page 159 Trip Odometer (Trip Odometer): Press this button to access the Odometer, Trip Distances, AVERAGE SPEED and TIIME ELAPSED modes. Odometer: When the trip odometer button is pressed, the ﬁrst menu displayed on the DIC screen is the odometer reading, or cumulative mileage of the vehicle. The odometer cannot be reset.
Page 160 Average Speed: The average speed is displayed in miles per hour (mph) or kilometers per hour (km/h). The average speed is calculated from the various vehicle speeds recorded since the last reset of this menu item. To reset the average speed, press the set/reset button.
Page 161 5. Press the set/reset button to scroll through the months of the year, releasing the button when the correct month appears. 6. Press the options button to advance to the days of the month. 7. Press the set/reset button to scroll through the days of the month, releasing the button when the correct day appears.
Page 162: Setting Compass
ENGINE OIL MONITOR SYSTEM: This menu lets you reset the engine oil monitor system for the vehicle. See “When to Change Engine Oil (GM Oil LIfe System)” under Engine Oil on page 5-16 . To reset the engine oil monitor system use the following procedure: 1.
Page 163 To adjust for compass variance use the following procedure: 1. Find your current location and variance zone number on the map. 2. Press the set/reset button to scroll through the variance zones and select the one in which you are located. 3.
Page 164 If a time delay is selected, the lamps will turn on (for the time selected), when the key is removed from the ignition, or the key is removed from the ignition or when the vehicle is unlocked using the remote keyless entry transmitter.
Page 165 To program this mode use the following procedure: 1. Press and release the set/reset button to scroll to either OFF or ON. 2. Press the options button again to advance to the next screen. AUTO DOOR UNLOCK: This screen can be used if ON was selected for the AUTO DOOR LOCK feature.
Page 166 To program this mode use the following procedure: 1. Press and release the set/reset button to scroll to either OFF or ON. 2. Press the options button again to advance to the next screen. REMOTE LOCKS FEEDBACK: This screen lets you select this option to be turned OFF, or lets you choose from two methods of veriﬁcation, LIGHTS or LIGHTS and HORN, that indicate the vehicle’s doors are locked...
Page 167 KEY CYLINDER DISARM: This screen lets you select this feature to be turned OFF or ON. This mode arms the vehicle’s ignition so that if a key other than the one that came with the vehicle is used to try to start it, the horn will sound.
Page 168 Fuel (Fuel): Press this button to access the Average Fuel Economy, Instantaneous Fuel Economy and Fuel Range modes. AVG ECONOMY (Average Fuel Economy): This screen will display the approximate average miles per gallon (mpg) or liters per 100 kilometers (L/100 km). This number is calculated based on the number of mpg (L/100 km) recorded since the last time this menu item was reset.
Page 169: Dic Warnings And Messages
DIC Warnings and Messages These messages will appear if there is a problem in one of the vehicle’s systems. They will override any other mode or screen the DIC may be in. Some messages allow you to erase them from the DIC screen.
Page 170: Change Oil Soon
AJAR This symbol appears with the AJAR warning message. This warning message appears when a door, the trunk or the hood of the vehicle is not properly closed. The graphic will highlight the hood or trunk if either one is not closed properly. The graphic will indicate a highlighted, open door to show which door or doors are not properly closed.
Page 171 CHARGING SYSTEM FAILURE This symbol appears with the CHARGING SYSTEM FAILURE warning message. This warning message indicates that there is a problem with the generator and battery charging systems. Have the electrical system checked by your dealer as soon as possible. This warning message will display when the ignition is in RUN.
Page 172 CHECK TIRE PRESSURE This symbol appears with the CHECK TIRE PRESSURE warning message. If the vehicle has ABS brakes, this warning message will appear when the air pressure in one of the tires is too low or too high. Check the vehicle’s tire pressure as soon as possible, and ﬁll the affected tire to the appropriate level.
Page 173: Delayed Locking
CRUISE SET This symbol appears with the CRUISE SET message. This message will appear whenever the cruise control is set. See Cruise Control Lever on page 3-8 and the “DISPLAY UNITS” screen in the options menu under DIC Controls and Displays on page 3-45 for more information.
Page 174: Headlamps Suggested
HEADLAMPS SUGGESTED This message appears when the amount of available light outside the vehicle is low and the exterior lamps control is off. This message informs the driver that turning on the exterior lamps is recommended even though the Daytime Running Lamps (DRL) are still illuminated and it has become dark enough outside to require the headlamps and/or other exterior lamps.
Page 175: Hot Engine Oil. Reduce Speed
To avoid added strain, turn off the air conditioner if it is on. When the coolant temperature returns to normal, the air conditioning compressor can be turned back on. This warning message will display only while the ignition is in RUN. A chime will sound continuously when this message is displayed.
Page 176 HOT TRANS FLUID This symbol appears with the HOT TRANS FLUID warning message. This warning message will appear when the transaxle ﬂuid in the vehicle is too hot. Stop the vehicle and allow it to idle until it cools down. If the warning message continues to display, have the vehicle serviced as soon as possible.
Page 177: Key In Ignition
KEY FOB BATTERY LOW This symbol appears with the KEY FOB BATTERY LOW warning message. This warning message will appear when the battery in the remote keyless entry transmitter needs to be replaced. See Remote Keyless Entry System Operation on page 2-5 for more information. This warning message will display when the ignition is in RUN.
Page 178: Left Front Turn Lamp Out
LEFT FRONT TURN LAMP OUT This warning message will appear when the left front turn signal lamp needs to be replaced. See Taillamps, Turn Signal, and Stoplamps on page 5-64 for replacement procedures. This warning message will display when the ignition is in RUN.
Page 179: Low Brake Fluid
LOW BRAKE FLUID This symbol appears with the LOW BRAKE FLUID warning message. This warning message will appear when the brake ﬂuid level is low. Fill the brake master cylinder to the proper level. See Engine Compartment Overview on page 5-12 for the location of the brake master cylinder reservoir.
Page 180: Low Oil Level
LOW OIL LEVEL This symbol appears with the LOW OIL LEVEL warning message. This warning message appears when the vehicle’s engine oil is low. Fill the oil to the proper level as soon as possible. See Engine Compartment Overview on page 5-12 for engine oil ﬁll location.
Page 181: Low Washer Fluid
This warning message will appear when the vehicle’s engine oil pressure is low. The low oil pressure warning light will also appear on the instrument panel. Stop the vehicle immediately, as engine damage can result from driving a vehicle with low oil pressure. Have the vehicle serviced as soon as possible when this warning message is displayed.
Page 182: Reading Lamp On
PARKING BRAKE ON This symbol appears with the PARKING BRAKE ON warning message. This warning message appears to alert the driver when the vehicle’s parking brake is on and the ignition is in RUN. See Parking Brake on page 2-27 for more information.
Page 183 REDUCED ENGINE POWER This symbol appears with the REDUCED ENGINE POWER warning message. This warning message appears when the vehicle’s engine power is reduced. This happens when driving conditions, such as climbing a steep hill, make the transaxle overwork in a gear that may cause damage to the vehicle’s engine or transaxle.
Page 184: Right Rear Turn Lamp Out
RIGHT REAR TURN LAMP OUT This warning message will appear when the vehicle’s right rear turn signal needs to be replaced. See Taillamps, Turn Signal, and Stoplamps on page 5-64 for bulb replacement procedures. This warning message will display only while the ignition is in RUN.
Page 185 SERVICE BRAKE SYSTEM This symbol appears with the SERVICE BRAKE SYSTEM warning message. This warning message will appear when the vehicle’s brakes are not funtioning properly. Have the brake system serviced by your dealer as soon as possible. This warning message will display only while the ignition is in RUN.
Page 186: Service Park Lamps
SERVICE PARK LAMPS This warning message will display if one of the vehicle’s parking lamps needs to be replaced. See Front Turn Signal, Parking and Fog Lamps on page 5-62 for bulb replacement procedures. This warning message will display only while the ignition is in RUN.
Page 187: Service Theft System
SERVICE STABILITY SYSTEM This symbol will appear with the SERVICE STABILITY SYSTEM warning message. ® If the vehicle has the Stabilitrak warning message will appear when it is not functioning ® properly. See Stabilitrak Plus System on page 4-13 for more information. Have the Stabilitrak serviced by your dealer as soon as possible.
Page 188: Service Variable Effort Steering
SERVICE VARIABLE EFFORT STEERING This symbol appears with the SERVICE VARIABLE EFFORT STEERING warning message. If the vehicle has Anti-Lock Brakes (ABS), it has the variable steering effort system. This warning message will display if this system is not functioning properly. See Steering on page 4-14 for more information.
Page 189: Stability Control Active
STABILITY CONTROL ACTIVE This symbol appears with the STABILITY CONTROL ACTIVE warning message. ® If the vehicle has the Stabilitrak warning message appears when the system is engaged and actively assisting the driver with directional control of the vehicle. A warning light will also appear on the instrument panel when this system is active.
Page 190: Theft System Not Programmed
STARTING DISABLED DUE TO ELECTRONIC THROTTLE CONTROL This warning message will appear when there is a malfunction with the electronic throttle control which prevents the vehicle from starting. Have the vehicle serviced by your dealer. This warning message will only appear while the ignition is in RUN, and will not disappear until the problem is resolved.
Page 191: Traction Control Active
TRACTION CONTROL ACTIVE This symbol appears with the TRACTION CONTROL ACTIVE message. If the vehicle has the traction control system, this message will appear when the system is on. TRACTION CONTROL ACTIVE will also appear in the Head-Up Display (HUD), if equipped. This warning message only displays while the ignition is in RUN and will not disappear until driving conditions change and the traction control is no longer active.
Page 192: Audio System(S)
Audio System(s) Notice: Before you add any sound equipment to your vehicle – like a tape player, CB radio, mobile telephone or two-way radio – be sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’s engine, radio or other systems, and even damage them.
Page 193: Radio With Cd
Radio with CD If your vehicle is equipped with the Monsoon audio system, included are eight speakers and an eight channel ampliﬁer. The radio will display MONSOON when the radio or the ignition is turned on. See your dealer for details.
Page 194: Playing The Radio
XM™ Radio Satellite Service (USA Only) XM™ is a continental U.S. based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk, and children’s programming. XM™ provides digital quality audio and text information, including song title and artist name. A service fee is required in order to receive the XM™...
Page 195: Finding A Station
Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (USA only, if equipped). The display will show your selection. TUNE: Turn this knob to choose radio stations. SEEK : Press the up or the down arrow to go to the next or to the previous station and stay there.
Page 196 Setting the Tone (Bass/Treble) TONE: Press and release this button until BASS, MID, or TREB appears on the display. The SELECT LED indicator will light to show that the tone control can be adjusted. Turn the SELECT knob to increase or to decrease.
Page 197 Finding a PTY Station (RDS and XM™) To select and ﬁnd a desired PTY perform the following: 1. Press PROG TYPE. PTY will be displayed on the screen. 2. Select a category by turning the SELECT knob. 3. Once the desired category is displayed, press either SEEK arrow to select the category and take you to the category’s ﬁrst station.
Page 198: Rds Messages
Setting Preset PTYs (RDS Only) The six numbered pushbuttons let you return to your favorite program types (PTYs). These pushbuttons have factory PTY presets. You can set up to 12 PTYs (six FM1 and six FM2) by performing the following steps: 1.
Page 199: Radio Messages
TRAF (Traffic): If TRAF appears on the display, the tuned station broadcasts traffic announcements. To receive the traffic announcement from the tuned station, press this button. Brackets will be displayed around TRAF and when a traffic announcement comes on the tuned radio station you will hear it. If the current tuned station does not broadcast traffic announcements, press this button and the radio will seek to a station that does.
Page 200 Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating Updating encryption code No Signal Loss of signal Loading XM Acquiring channel audio (after 4 second delay) CH Off Air Channel not in service CH Unavail Channel no longer...
Page 201 Radio Display Message No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0) Unknown Radio ID not known (should only be if hardware failure) Chk XMRcvr...
Page 202: Playing A Compact Disc
Playing a Compact Disc With the ignition on, insert a disc partway into the slot, label side up. The player will pull it in and the disc should begin playing. If you want to insert a CD when the ignition is off, ﬁrst press the eject symbol or push the RCL knob.
Page 203 SCAN : Press and hold one of the arrows for more than two seconds until SCAN and the track number appear on the display and you hear a beep. The disc will go to the next track, play for a few seconds, then go on to the next track.
Page 204: Radio With Cassette And Cd
Radio with Cassette and CD If your vehicle is equipped with this Monsoon audio system, included are eight speakers and an eight channel ampliﬁer. The radio will display MONSOON when the radio or the ignition is turned on. See your dealer for details.
Page 205 XM™ Radio Satellite Service (USA Only) XM™ is a continental U.S. based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk, and children’s programming. XM™ provides digital quality audio and text information, including song title and artist name. A service fee is required in order to receive the XM™...
Page 206 Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (USA only, if equipped). The display will show your selection. TUNE: Turn this knob to choose radio stations. SEEK : Press the up or the down arrow to go to the next or to the previous station and stay there.
Page 207 Setting the Tone (Bass/Treble) TONE: Press and release this button until BASS, MID, or TREB appears on the display. The SELECT LED indicator will light to show that the tone control can be adjusted. Turn the SELECT knob to increase or to decrease.
Page 208 Finding a PTY Station (RDS and XM™) To select and ﬁnd a desired PTY perform the following: 1. Press PROG TYPE. PTY will be displayed on the screen. 2. Select a category by turning the SELECT knob. 3. Once the desired category is displayed, press either SEEK arrow to select the category and take you to the category’s ﬁrst station.
Page 209 Setting Preset PTYs (RDS Only) The six numbered pushbuttons let you return to your favorite program types (PTYs). These pushbuttons have factory PTY presets. You can set up to 12 PTYs (six FM1 and six FM2) by performing the following steps: 1.
Page 210 TRAF (Traffic): If TRAF appears on the display, the tuned station broadcasts traffic announcements. To receive the traffic announcement from the tuned station, press this button. Brackets will be displayed around TRAF and when a traffic announcement comes on the tuned radio station you will hear it. If the current tuned station does not broadcast traffic announcements, press this button and the radio will seek to a station that does.
Page 211 Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating Updating encryption code No Signal Loss of signal Loading XM Acquiring channel audio (after 4 second delay) CH Off Air Channel not in service CH Unavail Channel no longer...
Page 212 Radio Display Message No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0) Unknown Radio ID not known (should only be if hardware failure) Chk XMRcvr...
Page 213: Playing A Cassette Tape
Playing a Cassette Tape Your tape player is built to work best with tapes that are up to 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player. The longer side with the tape visible should face to the right.
Page 214: Cassette Tape Messages
SEEK : Your tape must have at least three seconds of silence between each selection for seek to work. Press the up or the down arrow to search for the next or the previous selection on the tape. You can skip as many as nine selections up or down on the tape.
Page 215: Cd Adapter Kits
CD Adapter Kits It is possible to use a portable CD player adapter kit with your cassette tape player after disabling the tight/loose tape sensing feature on your tape player. To disable the feature, use the following steps: 1. Turn the ignition on. 2.
Page 216 Do not add paper labels to discs, they could get caught in the CD player. Do not play 3 inch discs without a standard adapter disc. If an error appears on the display, see “Compact Disc Messages” later in this section. 1 (Forward): Press and hold this pushbutton to advance quickly within a track.
Page 217 BAND: Press this button to listen to the radio when a CD is playing. The inactive CD will remain safely inside the radio for future listening. CD TAPE: Press this button to switch between playing a cassette tape and a compact disc if both are loaded, when listening to the radio.
Page 218: Radio With Six-Disc Cd
Radio with Six-Disc CD Radio Data System (RDS) Your audio system is equipped with a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. 3-114 With RDS, your radio can do the following: •...
Page 219 XM™ Radio Satellite Service (USA Only) XM™ is a continental U.S. based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk, and children’s programming. XM™ provides digital quality audio and text information, including song title and artist name. A service fee is required in order to receive the XM™...
Page 220 Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (USA only, if equipped). The display will show your selection. TUNE: Turn this knob to select radio stations. SEEK : Press the right or the left arrow to go to the next or to the previous station and stay there.
Page 221 Setting the Tone (Bass/Treble) AUDIO: Push the AUDIO knob until BASS, MID, or TREB appears on the display. Turn the knob to increase or to decrease. If a station is weak or noisy, you may want to decrease the treble. To adjust bass, midrange, or treble to the middle position, select BASS, MID, or TREB and push and hold the AUDIO knob.
Page 222 Finding a PTY Station (RDS and XM™) To select and ﬁnd a desired PTY perform the following: 1. Press the P-TYPE button. P-TYPE and the last selected PTY will be displayed on the screen. 2. Select a category by turning the P-TYPE knob. 3.
Page 223 BAND (Alternate Frequency): Alternate frequency allows the radio to switch to a stronger station with the same program type. Press and hold BAND for two seconds to turn alternate frequency on. AF ON will appear on the display. The radio may switch to stronger stations.
Page 224 RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! will appear on the display. You will hear the announcement, even if the volume is muted or a compact disc is playing. If the compact disc player is playing, play will stop during the announcement.
Page 225 Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating Updating encryption code No Signal Loss of signal Loading XM Acquiring channel audio (after 4 second delay) CH Off Air Channel not in service CH Unavail Channel no longer...
Page 226 Radio Display Message No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0) Unknown Radio ID not known (should only be if hardware failure) Chk XMRcvr...
Page 227 Playing a Compact Disc The integral CD player can play the smaller 8 cm single discs with an adapter ring. Full-size compact discs and the smaller discs are loaded in the same manner. If playing a CD-R the sound quality may be reduced due to CD-R quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R has been handled.
Page 228 3. Once the light stops ﬂashing and turns green, load a disc. Insert the disc partway into the slot, label side up. The player will pull the disc in. Once the disc is loaded, the light will begin ﬂashing again. Once the light stops ﬂashing and turns green you can load another disc.
Page 229 Do not repeatedly press the CD eject side of the LOAD CD eject button to eject a disc after you have tried to push it in manually. The receivers 25-second eject timer will reset at each press of eject, which will cause the receiver to not eject the disc until the 25-second time period has elapsed.
Page 230: Using Song List Mode
SCAN : To scan one disc, press and hold either SCAN arrow for more than two seconds until SCAN appears on the display and you hear a beep. Use this feature to listen to 10 seconds of each track of the currently selected disc.
Page 231 To play the song list, press the SONG LIST button. One beep will be heard and S-LIST will appear on the display. The recorded tracks will begin to play in the order that they were saved. You may seek through the song list by using the SEEK SCAN arrows.
Page 232: Theft-Deterrent Feature
Compact Disc Messages CHECK CD: If this message appears on the radio display, it could be due to one of the following reasons: • You’re driving on a very rough road. When the road becomes smoother, the disc should play. •...
Page 233: Audio Steering Wheel Controls
Audio Steering Wheel Controls If your vehicle has this feature, you can control certain radio functions using the buttons on your steering wheel. w t u x (Seek): Press the up arrow to seek to the next station and the down arrow to seek to the previous station.
Page 234: Understanding Radio Reception
Understanding Radio Reception The range for most AM stations is greater than for FM, especially at night. The longer range, however, can cause stations to interfere with each other. AM can pick up noise from things like storms and power lines. Try reducing the treble to reduce this noise if you ever get it.
Page 235: Care Of Your Cds
The broken tape detection feature of your cassette tape player may identify the cleaning cassette as a damaged tape, in error. To prevent the cleaning cassette from being ejected, use the following steps: 1. Turn the ignition on. 2. Turn the radio off. 3.
Page 236: Backglass Antenna
Backglass Antenna The AM-FM antenna is integrated with the rear window defogger, located in the rear window. Be sure that the inside surface of the rear window is not scratched and that the lines on the glass are not damaged. If the inside surface is damaged, it could interfere with radio reception.
Page 237 Section 4 Your Driving, the Road, and Your Vehicle ...4-2 Defensive Driving ...4-2 Drunken Driving ...4-3 Control of a Vehicle ...4-6 Braking ...4-6 Traction Control System (TCS) ...4-10 Enhanced Traction System (ETS) ...4-11 ® Stabilitrak Plus System ...4-13 Steering ...4-14 Off-Road Recovery ...4-16 Passing ...4-16 Loss of Control ...4-18...
Page 238: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 1-10 . Defensive driving really means “be ready for anything.”...
Page 239: Drunken Driving
Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It’s the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
Page 240 According to the American Medical Association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin or vodka.
Page 241 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
Page 242: Control Of A Vehicle
Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you’re driving on snow or ice, it’s easy to ask more of those control systems than the tires and road can provide.
Page 243: Anti-Lock Brake System (Abs)
Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking.
Page 244 Let’s say the road is wet and you’re driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here’s what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
Page 245: Braking In Emergencies
Remember: Anti-lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.
Page 246: Traction Control System (Tcs)
Traction Control System (TCS) If your vehicle has the 3800 supercharged V6 engine it has a traction control system that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction.
Page 247: Enhanced Traction System (Ets)
To turn the system off, press the traction control button located on the console. If the system is limiting wheel spin when you press the button the system will turn off instantly. You can turn the system back on at any time by pressing the button again.
Page 248 The Enhanced Traction System operates in all transaxle shift lever positions. But the system can upshift the transaxle only as high as the shift lever position you’ve chosen, so you should use the lower gears only when necessary. See Automatic Transaxle Operation on page 2-22 .
Page 249: Stabilitrak ® Plus System
® Stabilitrak Plus System Your vehicle may be equipped with a vehicle stability enhancement system called Stabilitrak an advanced computer controlled system that assists you with directional control of the vehicle in difficult driving conditions. ® Stabilitrak Plus comes on whenever the vehicle is started.
Page 250: Steering
Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Variable Effort Steering If your vehicle has this steering system, the system provides less steering effort for parking and when driving at speeds below 20 mph (32 km/h).
Page 251: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and ﬁnd a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 252: Off-Road Recovery
Off-Road Recovery You may ﬁnd that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
Page 253 • Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you’re following a larger vehicle. Also, you won’t have adequate space if the vehicle ahead suddenly slows or stops.
Page 254: Loss Of Control
Loss of Control Let’s review what driving experts say about what happens when the three control systems (brakes, steering and acceleration) don’t have enough friction where the tires meet the road to do what the driver has asked. In any emergency, don’t give up. Keep trying to steer and constantly seek an escape route or area of less danger.
Page 255: Driving At Night
Driving at Night Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Here are some tips on night driving. •...
Page 256: Driving In Rain And On Wet Roads
What you do in the daytime can also affect your night vision. For example, if you spend the day in bright sunshine you are wise to wear sunglasses. Your eyes will have less trouble adjusting to night. But if you’re driving, don’t wear sunglasses at night.
Page 257 The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road and even people walking.
Page 258: Driving Through Flowing Water
Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road.
Page 259: City Driving
City Driving One of the biggest problems with city streets is the amount of traffic on them. You’ll want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: •...
Page 260: Freeway Driving
Freeway Driving Mile for mile, freeways (also called thruways, parkways, expressways, turnpikes or superhighways) are the safest of all roads. But they have their own special rules. 4-24 The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving.
Page 261: Before Leaving On A Long Trip
When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the next exit. The exit ramp can be curved, sometimes quite sharply. The exit speed is usually posted.
Page 262: Highway Hypnosis
Highway Hypnosis Is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 263 If you drive regularly in steep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. • Keep your vehicle in good shape. Check all ﬂuid levels and also the brakes, tires, cooling system and transaxle.
Page 264: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your trunk. 4-28 Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth and a couple of reﬂective warning triangles.
Page 265: Driving On Snow Or Ice
Driving on Snow or Ice Most of the time, those places where your tires meet the road probably have good traction. However, if there is snow or ice between your tires and the road, you can have a very slippery situation. You’ll have a lot less traction or “grip”...
Page 266: If You're Caught In A Blizzard
if you feel your vehicle begin to slide, let up on the brakes a little. Push the brake pedal down steadily to get the most traction you can. Remember, unless you have anti-lock, if you brake so hard that your wheels stop rolling, you’ll just slide. Brake so your wheels always keep rolling and you can still steer.
Page 267 • Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, ﬂoor mats – anything you can wrap around yourself or tuck under your clothing to keep warm. You can run the engine to keep warm, but be careful.
Page 268: If You Are Stuck: In Sand, Mud, Ice Or Snow
Run your engine only as long as you must. This saves fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged.
Page 269: Towing
Notice: Spinning your wheels can destroy parts of your vehicle as well as the tires. If you spin the wheels too fast while shifting your transaxle back and forth, you can destroy your transaxle. See “Rocking Your Vehicle To Get It Out.” For information about using tire chains on your vehicle, see Tire Chains on page 5-77 .
Page 270: Dolly Towing
Here are some important things to consider before you do recreational vehicle towing: • What’s the towing capacity of the towing vehicle? Be sure you read the tow vehicle manufacturer’s recommendations. • How far will you tow? Some vehicles have restrictions on how far and how long they can tow.
Page 271: Loading Your Vehicle
Loading Your Vehicle Two labels on your vehicle show how much weight it may properly carry. The Tire-Loading Information label is on the inside of the trunk lid. The label tells you the proper size, speed rating and recommended inﬂation pressures for the tires on your vehicle.
Page 272 If you do have a heavy load, spread it out. Don’t carry more than 167 lbs (75 kg) in your trunk. CAUTION: Do not load your vehicle any heavier than the GVWR, or either the maximum front or rear GAWR. If you do, parts on your vehicle can break, and it can change the way your vehicle handles.
Page 273: Towing A Trailer
Towing a Trailer CAUTION: If you don’t use the correct equipment and drive properly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well — or even at all. You and your passengers could be seriously injured.
Page 274: If You Do Decide To Pull A Trailer
And, it can also depend on any special equipment that you have on your vehicle. You can ask your dealer for our trailering information or advice, or you can write us at: Pontiac-GMC Customer Assistance Center P.O. Box 33172 Detroit, MI 48232-5172 In Canada, write to:...
Page 275: Weight Of The Trailer Tongue
Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle.
Page 276: Safety Chains
Hitches It’s important to have the correct hitch equipment. Crosswinds, large trucks going by and rough roads are a few reasons why you’ll need the right hitch. Here are some rules to follow: • The rear bumper on your vehicle is not intended for hitches.
Page 277: Driving With A Trailer
Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as responsive as your vehicle is by itself.
Page 278: Making Turns
Making Turns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Your vehicle could be damaged. Avoid making very sharp turns while trailering. When you’re turning with a trailer, make wider turns than normal.
Page 279: Parking On Hills
Parking on Hills CAUTION: You really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged. But if you ever have to park your rig on a hill, here’s how to do it: 1.
Page 280: Engine Cooling When Trailer Towing
Maintenance When Trailer Towing Your vehicle will need service more often when you’re pulling a trailer. See Part A: Scheduled Maintenance Services on page 6-4 for more information. Things that are especially important in trailer operation are automatic transaxle ﬂuid (don’t overﬁll), engine oil, drive belts, cooling system and brake system.
Page 281 Section 5 Service ...5-3 Doing Your Own Service Work ...5-3 Adding Equipment to the Outside of Your Vehicle ...5-4 Fuel ...5-4 Gasoline Octane ...5-4 Gasoline Speciﬁcations ...5-5 California Fuel ...5-5 Additives ...5-6 Fuels in Foreign Countries ...5-7 Filling Your Tank ...5-7 Filling a Portable Fuel Container ...5-10 Checking Things Under the Hood ...5-10 Hood Release ...5-11...
Page 282 Section 5 If a Tire Goes Flat ...5-78 Changing a Flat Tire ...5-78 Compact Spare Tire ...5-89 Appearance Care ...5-90 Cleaning the Inside of Your Vehicle ...5-90 Care of Safety Belts ...5-93 Weatherstrips ...5-93 Cleaning the Outside of Your Vehicle ...5-93 Sheet Metal Damage ...5-95 Finish Damage ...5-95 Underbody Maintenance ...5-96...
Page 283: Service
Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you’ll go to your dealer for all your service needs. You’ll get genuine GM parts and GM-trained and supported service people. We hope you’ll want to keep your GM vehicle all GM. Genuine GM parts have one of these marks: Doing Your Own Service Work If you want to do some of your own service work, you’ll...
Page 284: Adding Equipment To The Outside Of Your Vehicle
CAUTION: (Continued) • Be sure to use the proper nuts, bolts and other fasteners. “English” and “metric” fasteners can be easily confused. If you use the wrong fasteners, parts can later break or fall off. You could be hurt. Adding Equipment to the Outside of Your Vehicle Things you might add to the outside of your vehicle can affect the airﬂow around it.
Page 285: Gasoline Speciﬁcations
Gasoline Speciﬁcations It is recommended that gasoline meet speciﬁcations which were developed by automobile manufacturers around the world and contained in the World-Wide Fuel Charter which is available from the Alliance of Automobile Manufacturers at www.autoalliance.org. Gasoline meeting these speciﬁcations could provide improved driveability and emission control system performance compared to other gasoline.
Page 286: Additives
Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent engine and fuel system deposits from forming, allowing your emission control system to work properly. You should not have to add anything to your fuel. However, some gasolines contain only the minimum amount of additive required to meet U.S.
Page 287: Fuels In Foreign Countries
Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel may be hard to ﬁnd. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel wouldn’t be covered by your warranty.
Page 288 The fuel cap is located behind a hinged door on the driver’s side of the vehicle. While refueling, let the fuel cap hang by the tether below the fuel ﬁll opening. To remove the fuel cap, turn it slowly to the left (counterclockwise).
Page 289 Be careful not to spill fuel. Don’t top off or overﬁll your tank, and wait a few seconds after you have ﬁnished pumping before you remove the nozzle. Clean fuel from painted surfaces as soon as possible. See Cleaning the Outside of Your Vehicle on page 5-93 . When you put the fuel cap back on, turn it to the right (clockwise) until you hear three “clicks.”...
Page 290: Filling A Portable Fuel Container
Filling a Portable Fuel Container CAUTION: Never ﬁll a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor.You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: •...
Page 291: Hood Release
Hood Release To open the hood, do the following: 1. Pull the hood release handle located inside the vehicle near the parking brake pedal. 2. Go to the front of the vehicle and release the secondary hood latch, located near the center front of the engine compartment, by moving it to the right.
Page 292: Engine Compartment Overview
Engine Compartment Overview 3800 V6 Engine When you open the hood on a vehicle equipped with the 3800 V6 engine, you’ll see: 3800 V6 Engine 5-12...
Page 293 A. Windshield Washer Fluid Reservoir. (See Windshield Washer Fluid on page 5-43 .) B. Remote Positive (+) Battery Terminal. (See Jump Starting on page 5-49 .) C. Battery. (See Battery on page 5-48 ). D. Underhood Fuse Block. (See Fuses and Circuit Breakers on page 5-99 .) E.
Page 294 3800 V6 Supercharged Engine When you open the hood on a vehicle equipped with the 3800 V6 Supercharged engine, you’ll see: 3800 V6 Supercharged Engine 5-14...
Page 295 A. Windshield Washer Fluid Reservoir. (See Windshield Washer Fluid on page 5-43 .) B. Remote Positive (+) Battery Terminal. (See Jump Starting on page 5-49 .) C. Battery. (See Battery on page 5-48 .) D. Underhood Fuse Block. (See Fuses and Circuit Breakers on page 5-99 .) E.
Page 296: Engine Oil
Engine Oil If this symbol, along with the LOW OIL LEVEL message appears on the Driver Information Center (DIC), it means you need to check your engine oil level right away. For more information, see “LOW OIL LEVEL” under DIC Warnings and Messages on page 3-65 .
Page 297: When To Add Engine Oil
When to Add Engine Oil If the oil is at or below the cross-hatched area at the tip of the dipstick, then you’ll need to add at least one quart of oil. But you must use the right kind. This section explains what kind of oil to use.
Page 298: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use Look for two things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle.
Page 299: Engine Oil Additives
Oils meeting these requirements should also have the starburst symbol on the container. This symbol indicates that the oil has been certiﬁed by the American Petroleum Institute (API). You should look for this information on the oil container, and use only those oils that are identiﬁed as meeting GM Standard GM6094M and have the starburst symbol on the front of the oil container.
Page 300: When To Change Engine Oil
When to Change Engine Oil (GM Oil Life System) Your vehicle has a computer system that lets you know when to change the engine oil and ﬁlter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indicated can vary considerably.
Page 301: What To Do With Used Oil
What to Do with Used Oil Used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer. Don’t let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner.
Page 302: How To Check And Add Oil
How to Check and Add Oil Park the vehicle on a level surface. Check oil only when the engine is cold. Allow the engine to cool two to three hours after running. CAUTION: If you remove the supercharger oil ﬁll plug while the engine is hot, pressure may cause hot oil to blow out of the oil ﬁll hole.
Page 303 To inspect or replace the engine air cleaner/ﬁlter do the following: 1. Loosen the two clips on the top of the engine air cleaner/ﬁlter housing and lift the ﬁlter cover tabs out of the housing. 2. Push the ﬁlter cover housing toward the engine. 3.
Page 304: Automatic Transaxle Fluid
Automatic Transaxle Fluid When to Check and Change A good time to check your automatic transaxle ﬂuid level is when the engine oil is changed. Change both the ﬂuid and ﬁlter every 50,000 miles (83 000 km) if the vehicle is mainly driven under one or more of these conditions: •...
Page 305 To get the right reading, the ﬂuid should be at normal operating temperature, which is 180°F to 200°F (82°C to 93°C). Get the vehicle warmed up by driving about 15 miles (24 km) when outside temperatures are above 50°F (10°C). If it’s colder than 50°F (10°C), you may have to drive longer.
Page 306: Maintenance Schedule
3. Check both sides of the dipstick, and read the lower level. The ﬂuid level must be in the cross-hatched area. 4. If the ﬂuid level is in the acceptable range, push the dipstick back in all the way. How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transaxle ﬂuid to use.
Page 307: What To Use
A 50/50 mixture of clean, drinkable water and ® DEX-COOL engine coolant will: • Give freezing protection down to 34°F ( 37°C). • Give boiling protection up to 265°F (129°C). • Protect against rust and corrosion. • Help keep the proper engine temperature. •...
Page 308: Checking Coolant
Checking Coolant The coolant recovery tank is located in the engine compartment toward the rear of the engine on the passenger’s side of the vehicle. See Engine Compartment Overview on page 5-12 for more information on location. The vehicle must be on a level surface when checking the coolant level.
Page 309: Radiator Pressure Cap
CAUTION: Turning the radiator pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. With the coolant recovery tank, you will almost never have to add coolant at the radiator.
Page 310: Overheated Engine Protection Operating Mode
Overheated Engine Protection Operating Mode This emergency operating mode allows your vehicle to be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternates ﬁring groups of cylinders helps prevent engine damage. In this mode, you will notice a signiﬁcant loss in power and engine performance.
Page 311: If No Steam Is Coming From Your Engine
CAUTION: (Continued) down. Wait until there is no sign of steam or coolant before you open the hood. If you keep driving when your engine is overheated, the liquids in it can catch ﬁre. You or others could be badly burned. Stop your engine if it overheats, and get out of the vehicle until the engine is cool.
Page 312: Cooling System
If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about 10 minutes. If the warning doesn’t come back on, you can drive normally. If the warning continues, and you have not stopped, pull over, stop, and park your vehicle right away.
Page 313 3800 V6 Supercharged A. Coolant Recovery Tank B. Electric Engine Cooling Fan C. Radiator Pressure Cap CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.
Page 314 When the engine is cold, the coolant level should be at or above the COLD mark on the coolant recovery tank. If it isn’t, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system.
Page 315 How to Add Coolant to the Coolant Recovery Tank CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture.
Page 316 When the coolant in the coolant recovery tank is at the COLD mark, start your vehicle. If the overheat warning continues, there’s one more thing you can try. You can add the proper coolant mixture directly to the radiator, but be sure the cooling system is cool before you do it.
Page 317: How To Add Coolant To The Radiator
How to Add Coolant to the Radiator Notice: Your engine has a speciﬁc radiator ﬁll procedure. Failure to follow this procedure could cause your engine to overheat and be severely damaged. The radiator pressure cap is located on the passenger’s side of the vehicle in the front of the engine compartment, near the battery and the diagonal cross brace.
Page 318 2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough.
Page 319 3800 Supercharged Engine 3.2. Lift the engine cover shield at the front, slide the catch tab out of the engine bracket and remove the cover shield. 3.3. Put the oil ﬁll tube, with cap attached, in the valve cover oil ﬁll hole until you’re ready to replace the cover shield.
Page 320 5. Fill the radiator with the proper DEX-COOL coolant mixture, up to the base of the ﬁller neck. See Engine Coolant on page 5-26 for more information about the proper coolant mixture. If you see a stream of coolant coming from an air bleed valve, close the valve.
Page 321 10. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. 11. By this time, the coolant level inside the radiator ﬁller neck may be lower. If the level is lower, add more of the proper DEX-COOL through the ﬁller neck until the level reaches the base of the ﬁller neck.
Page 322: Power Steering Fluid
Power Steering Fluid The power steering ﬂuid reservoir is located in the engine compartment next to the engine coolant recovery tank. It sits low in the engine compartment. See Engine Compartment Overview on page 5-12 . 5-42 When to Check Power Steering Fluid It is not necessary to regularly check power steering ﬂuid unless you suspect there is a leak in the system or you hear an unusual noise.
Page 323: Windshield Washer Fluid
The ﬂuid level should be between the ADD and HOT marks when the engine is cold When the engine compartment is hot, the level should be at the HOT mark. If the ﬂuid is at the ADD mark when the engine is cold or hot, you should add power steering ﬂuid.
Page 324: Adding Washer Fluid
Adding Washer Fluid The windshield washer ﬂuid reservoir is located in the engine compartment on the passenger’s side of the vehicle near the diagonal cross brace. See Engine Compartment Overview on page 5-12 for reservoir location. Open the cap with the washer symbol on it.
Page 325: Brakes
Brakes Brake Fluid Your brake master cylinder reservoir is ﬁlled with DOT-3 brake ﬂuid. See Engine Compartment Overview on page 5-12 for the location of the reservoir. There are only two reasons why the brake ﬂuid level in the reservoir might go down. The ﬁrst is that the brake ﬂuid goes down to an acceptable level during normal brake lining wear.
Page 326 United States When your brake ﬂuid falls to a low level, your brake warning light will come on. See Brake System Warning Light on page 3-36 . What to Add When you do need brake ﬂuid, use only DOT-3 brake ﬂuid.
Page 327: Brake Wear
Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal ﬁrmly).
Page 328: Battery
Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality GM brake parts. When you replace parts of your braking system —...
Page 329: Jump Starting
Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to follow the steps listed below to do it safely. CAUTION: Batteries can hurt you. They can be dangerous because: •...
Page 330 Notice: If you leave your radio on, it could be badly damaged. The repairs wouldn’t be covered by your warranty. 3. Turn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or in the accessory power outlet. Turn off the radio and all lamps that aren’t needed.
Page 331 CAUTION: An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running.
Page 332 5. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one.
Page 333 7. Don’t let the other end touch metal. Connect it to the positive (+) terminal location on the vehicle with the good battery. Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative ( ) cable to the negative ( ) terminal location on the vehicle with the good battery.
Page 334 9. Connect the other end of the negative ( ) cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection is just as good there, and the chance of sparks getting back to the battery is much less.
Page 335 Jumper Cable Removal A. Heavy, Unpainted Metal Engine Part B. Good Battery or Remote Positive (+) Terminal C. Dead Battery or Remote Positive (+) Terminal To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( ) cable from the vehicle that had the dead battery.
Page 336: Headlamp Aiming
Headlamp Aiming The vehicle has a visual optical headlamp aiming system. The aim has been preset at the factory and should need no further adjustment If the vehicle is damaged in an accident, the headlamp aim may be affected and adjustment may be necessary.
Page 337 Headlamp aiming is done with the vehicle’s low-beam lamps. The high-beam lamps will be correctly aimed if the low-beam lamps are aimed properly. The vertical headlamp aiming screws are under the hood near the headlamps. Adjustment screws can be turned with an E8 Torx ®...
Page 338 3. At the wall or other ﬂat surface, measure from the ground upward the recorded distance from Step 2 and draw or tape a horizontal line the width of the vehicle. 5-58 4. Turn on the low-beam headlamps and place a piece of cardboard or equivalent in front of the headlamp not being aimed.
Page 339: Bulb Replacement
5. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line. 6. Repeat steps 4 and 5 for the opposite headlamp. Bulb Replacement For the proper type of replacement bulb, see Replacement Bulbs on page 5-66 .
Page 340: Headlamps And Sidemarker Lamps
Headlamps and Sidemarker Lamps 1. Open the hood and replace the bulb for the appropriate lamp listed below. A. High-Beam Headlamp B. Low-Beam Headlamp C. Sidemarker Lamp 5-60 2. Pull up half-way on the plastic retaining clip on the electrical connector.
Page 341 3. Pull the headlamp assembly straight out from the vehicle. Be careful to avoid scratching or chipping the paint on the vehicle while removing. 4. Turn the bulb socket ring one-quarter of a turn counterclockwise to remove it from the headlamp assembly.
Page 342: Front Turn Signal, Parking And Fog Lamps
Front Turn Signal, Parking and Fog Lamps The front turn signal, parking and fog lamps are located below the high, low-beam and sidemarker lamps 1. Open the hood. Replace the bulb for the appropriate lamp listed below. A. Front Turn Signal, Parking Lamp B.
Page 343 4. Pull the headlamp assembly straight out from the vehicle. The front turn signal, parking lamp and fog lamp bulbs are located below the headlamp assembly. The arrow shows the turn signal/parking lamp bulb. The fog lamp bulb is below it. 5.
Page 344: Center High-Mounted Stoplamp (Chmsl)
Center High-Mounted Stoplamp (CHMSL) The LED bulb for the center high-mounted stoplamp is located in the spoiler. See your dealer for replacement. Taillamps, Turn Signal, and Stoplamps 1. Open the trunk. Replace the bulb for the appropriate lamp listed below. A.
Page 345: Back-Up Lamps
6. Turn the appropriate lamp socket a quarter turn counterclockwise and remove it. 7. Remove the old bulb. 8. Place the new bulb into the socket and turn the lamp socket clockwise to install it. 9. Carefully reinstall the taillamp assembly by reversing Steps 2 through 5.
Page 346: Replacement Bulbs
2. Turn the appropriate lamp socket a quarter turn counterclockwise and remove it. 3. Remove the old bulb. 4. Put the new bulb into the lamp socket. 5. Turn the bulb a quarter turn clockwise to reinstall it. 5-66 Replacement Bulbs Exterior Lamps Back-Up Lamp Front Park/Turn Lamp...
Page 347: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Remove and replace a windshield wiper by following these steps: 1. Put the ignition in ACCESSORY and turn the windshield wipers on. 2. Stop the windshield wipers when they are in the upright position by turning the key to the off position. 3.
Page 348: Tires
Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your Pontiac Warranty booklet for details. CAUTION: Poorly maintained and improperly used tires are dangerous.
Page 349: Inﬂation -- Tire Pressure
Inﬂation -- Tire Pressure The Tire-Loading Information label, which is on the inside of the trunk lid, shows the correct inﬂation pressures for your tires when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 km).
Page 350: Tire Pressure Monitor System
Tire Pressure Monitor System This vehicle has the tire inﬂation monitor system, it can alert you to a large change in the pressure of one tire. The system “learns” the pressure at each tire throughout the operating speed range of your vehicle. The system normally takes between 45 and 90 minutes of driving to learn the tire pressures.
Page 351: Tire Inspection And Rotation
Tire Inspection and Rotation Tires should be rotated every 7,500 miles (12 500 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 5-72 and Wheel Replacement on page 5-75 for more information.
Page 352: When It Is Time For New Tires
When It Is Time for New Tires One way to tell when it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. 5-72 You need a new tire if any of the following statements are true:...
Page 353: Buying New Tires
Buying New Tires To ﬁnd out what kind and size of tires you need, look at the Tire-Loading Information label. The tires installed on your vehicle when it was new had a Tire Performance Criteria Speciﬁcation (TPC Spec) number on each tire’s sidewall. When you get new tires, get ones with that same TPC Spec number.
Page 354: Uniform Tire Quality Grading
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration, which grades tires by treadwear, traction and temperature performance.
Page 355: Wheel Alignment And Tire Balance
Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speciﬁed indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Page 356: Used Replacement Wheels
Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the same way as the one it replaces. If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new GM original equipment parts.
Page 357: Tire Chains
Tire Chains CAUTION: If your vehicle has P225/55R17 size tires, don’t use tire chains, there’s not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts.
Page 358: If A Tire Goes Flat
If a Tire Goes Flat It’s unusual for a tire to “blowout” while you’re driving, especially if you maintain your tires properly. If air goes out of a tire, it’s much more likely to leak out slowly. But if you should ever have a “blowout”, here are a few tips about what to expect and what to do: If a front tire fails, the ﬂat tire will create a drag that pulls the vehicle toward that side.
Page 359 CAUTION: (Continued) To be even more certain the vehicle won’t move, you can put blocks at the front and rear of the tire farthest away from the one being changed. That would be the tire on the other side of the vehicle, at the opposite end. The following steps will tell you how to use the jack and change a tire.
Page 360: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The equipment you’ll need is in the trunk. 1. Turn the center nut on the compact spare tire cover counterclockwise to remove it. 5-80 2. Remove the compact spare tire. See Compact Spare Tire on page 5-89 for more information about the compact spare tire.
Page 361 3. Turn the nut holding the jack counterclockwise and 4. The tools you’ll be using include the jack (A) remove it. Then remove the jack and wrench. extension and protector/guide (B) and the wheel wrench (C). 5-81...
Page 362: Removing Wheel Nut Caps
Removing Wheel Nut Caps If there is a wheel cover, loosen the plastic nut caps with the wheel wrench. They won’t come off. Then, using the ﬂat end of the wheel wrench, pry along the edge of the cover until it comes off. 5-82 Removing the Flat Tire and Installing the Spare Tire...
Page 363 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
Page 364 For jacking at the vehicle’s rear location, put the jack lift head (B) about 9 inches (23 cm) from the front edge of the rear wheel opening (C). Line up the jack with the arrow (A) as shown. Put the compact spare tire near you. 3.
Page 365 CAUTION: Never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 5. Place the spare on the wheel mounting surface. 6. Reinstall the wheel nuts with the rounded end of the nuts toward the wheel.
Page 366 8. Tighten the wheel nuts ﬁrmly in a crisscross sequence as shown. 9. Reinstall the wheel trim. If the vehicle has plastic caps tighten them by hand. With a wheel wrench, tighten the plastic caps an additional quarter turn clockwise. CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose...
Page 367: Storing The Flat Tire And Tools
Storing the Flat Tire and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. After you’ve put the compact spare tire on your vehicle, you’ll need to store the ﬂat tire in the trunk.
Page 368: Compact Spare Tire
Storing the Spare Tire and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Compact Spare Tire The compact spare tire is for temporary use only.
Page 369 Compact Spare Tire Although the compact spare tire was fully inﬂated when your vehicle was new, it can lose air after a time. Check the inﬂation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inﬂated.
Page 370: Appearance Care
Appearance Care Remember, cleaning products can be hazardous. Some are toxic. Others can burst into ﬂames if you strike a match or get them on a hot part of the vehicle. Some are dangerous if you breathe their fumes in a closed space.
Page 371: Special Fabric Cleaning Problems
Here are some cleaning tips: • Always read the instructions on the cleaner label. • Clean up stains as soon as you can – before they set. • Carefully scrape off any excess stain. • Use a clean cloth or sponge, and change to a clean area often.
Page 372: Cleaning Vinyl
Cleaning Vinyl Use warm water and a clean cloth. • Rub with a clean, damp cloth to remove dirt. You may have to do this more than once. • Things like tar, asphalt and shoe polish will stain if you don’t get them off quickly. Use a clean cloth and vinyl cleaner.
Page 373: Care Of Safety Belts
Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Page 374: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under “Washing Your Vehicle.” Finish Care Occasional waxing or mild polishing of your vehicle by hand may be necessary to remove residue from the paint ﬁnish.
Page 375: Cleaning Aluminum Wheels
Cleaning Aluminum Wheels Keep your wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel. A wax may then be applied. The surface of these wheels is similar to the painted surface of your vehicle.
Page 376: Underbody Maintenance
Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, accelerated corrosion (rust) can occur on the underbody parts such as fuel lines, frame, ﬂoor pan and exhaust system even though they have corrosion protection.
Page 377 GM Vehicle Care/Appearance Materials (cont’d) Description Removes dirt and grime Chrome and Wire Wheel from chrome wheels and Cleaner wire wheel covers. Removes dust, ﬁngerprints, and surface Finish Enhancer contaminants, Spray on wipe off. Removes swirl marks, ﬁne scratches and Swirl Remover Polish other light surface contamination.
Page 378: Vehicle Identiﬁcation
Vehicle Identiﬁcation Vehicle Identiﬁcation Number (VIN) This is the legal identiﬁer for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle.
Page 379: Electrical System
Electrical System Add-On Electrical Equipment Notice: Don’t add anything electrical to your vehicle unless you check with your dealer ﬁrst. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.
Page 380: Instrument Panel Fuse Block
Instrument Panel Fuse Block Some fuses are in a fuse block located on the end of the instrument panel on the passenger side. To get to the fuse block lift up on the side panel. 5-100 A fuse usage chart is on the inside of this panel. Circuit Breakers Usage...
Page 381 Circuit Breakers Usage RR DEFOG Rear Window Defogger DR LK/TRUNK Door Lock/Trunk ® ONSTAR/ALDL Onstar /Diagnostic Link CANNISTER Fuel Tank Solenoid Cannister PK LAMPS Parking Lamps RADIO/AMP Radio Ampliﬁer Remote Funtion Activator RFA/MOD (Remote Keyless Entry) DISPLAYS Instrument Panel Dispays/HUD/DIC INT LIGHT Interior Lamps HVAC...
Page 382: Underhood Fuse Block
Underhood Fuse Block Some fuses are located in a fuse block in the engine compartment on the passenger’s side. Unscrew the bolt in the center of the fuse block cover and remove the cover. A fuse chart is on the inside of the cover. To take the cover off, press the tab at the bottom of the cover and pull.
Page 383 Fuses Usage A/C Clutch Oxygen Sensor Power Control Module Power Control Module/Electronic Throttle Control Electronic Throttle Control Display Anti-Lock Brake Solenoid Fuel Injection Transmission Solenoid Fuel Pump Anti-Lock Brakes Electronic Ignition Battery Main 1 Battery Main 2 Battery Main 3 Fan 1 Battery Main 4 Anti-Lock Brake Motor...
Page 384: Capacities And Speciﬁcations
Capacities and Speciﬁcations Please refer to Part D: Recommended Fluids and Lubricants on page 6-16 for more information. Application Air Conditioning Refrigerant R134a Automatic Transaxle Pan Removal and Replacement After Complete Overhaul When draining/replacing converter or auxiliary cooler, more ﬂuid may be needed. Cooling System Including Reservoir 3800 V6 (Code K) 3800 V6 Supercharged (Code 1)
Page 385: Normal Maintenance Replacement Parts
Engine 3800 V6 231 CID (3.8L L26) 3800 V6 Supercharged 231 CID (3.8L L32) Normal Maintenance Replacement Parts Normal Maintenance Replacement Parts Automatic Transmission Filter Engine Air Cleaner /Filter Oil Filter Passenger Compartment Air Filter Kit Spark Plugs Wiper Blades ®...
Page 386 NOTES 5-106...
Page 387 Section 6 Maintenance Schedule ...6-2 Introduction ...6-2 Maintenance Requirements ...6-2 Your Vehicle and the Environment ...6-2 How This Section is Organized ...6-3 Part A: Scheduled Maintenance Services ...6-4 Using Your Maintenance Schedule ...6-4 Scheduled Maintenance ...6-5 Part B: Owner Checks and Services ...6-10 At Each Fuel Fill ...6-10 At Least Once a Month ...6-10 At Least Twice a Year ...6-11...
Page 388: Maintenance Schedule
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Maintenance Requirements Maintenance intervals, checks, inspections and recommended ﬂuids and lubricants as prescribed in this...
Page 389: How This Section Is Organized
How This Section is Organized This maintenance schedule is divided into ﬁve parts: “Part A: Scheduled Maintenance Services” explains what to have done and how often. Some of these services can be complex, so unless you are technically qualiﬁed and have the necessary equipment, you should let your GM dealer’s service department do these jobs.
Page 390: Part A: Scheduled Maintenance Services
Part A: Scheduled Maintenance Services This part contains engine oil scheduled maintenance which explains the engine oil life system and how it indicates when to change the engine oil and ﬁlter. Also, listed are scheduled maintenance services which are to be performed at the mileage intervals speciﬁed. Using Your Maintenance Schedule We at General Motors want to keep your vehicle in good working condition.
Page 391: Scheduled Maintenance
Scheduled Maintenance The services shown in this schedule up to 100,000 miles (166 000 km) should be repeated after 100,000 miles (166 000 km) at the same intervals for the life of this vehicle. The services shown at 150,000 miles (240 000 km) should be repeated at the same interval after 150,000 miles (240 000 km) for the life of this vehicle.
Page 392 It is also important to check your oil regularly and keep it at the proper level. If the system is ever reset accidentally, you must change your oil at 3,000 miles (5 000 km) since your last oil change. Remember to reset the oil life system whenever the oil is changed.
Page 393 37,500 Miles (62 500 km) Rotate tires. See Tire Inspection and Rotation on page 5-71 for proper rotation pattern and additional information. (See footnote +.) 45,000 Miles (75 000 km) Inspect engine air cleaner ﬁlter. If necessary, replace the ﬁlter. If vehicle is driven in dusty/dirty conditions, inspect ﬁlter at every engine oil change.
Page 394 60,000 Miles (100 000 km) For supercharged engines only: Check the supercharger oil level and add the proper supercharger oil as needed (or every 36 months, whichever occurs ﬁrst). See Part D: Recommended Fluids and Lubricants on page 6-16 . An Emission Control Service.
Page 395 90,000 Miles (150 000 km) Replace engine air cleaner ﬁlter. See Engine Air Cleaner/Filter on page 5-22 for more information. An Emission Control Service. For supercharged engines only: Check the supercharger oil level and add the proper supercharger oil as needed (or every 36 months, whichever occurs ﬁrst).
Page 396: Part B: Owner Checks And Services
Part B: Owner Checks and Services Listed in this part are owner checks and services which should be performed at the intervals speciﬁed to help ensure the safety, dependability and emission control performance of your vehicle. Be sure any necessary repairs are completed at once. Whenever any ﬂuids or lubricants are added to your vehicle, make sure they are the proper ones, as shown in Part D.
Page 397: At Least Twice A Year
At Least Twice a Year Restraint System Check Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 398: Starter Switch Check
Starter Switch Check CAUTION: When you are doing this check, the vehicle could move suddenly. If it does, you or others could be injured. Follow the steps below. 1. Before you start, be sure you have enough room around the vehicle. 2.
Page 399: Ignition Transaxle Lock Check
Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position. • The key should turn to LOCK only when the shift lever is in PARK (P). •...
Page 400: Part C: Periodic Maintenance Inspections
Part C: Periodic Maintenance Inspections Listed in this part are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your dealer’s service department do these jobs. Make sure any necessary repairs are completed at once.
Page 401: Engine Cooling System Inspection
Engine Cooling System Inspection Inspect the hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, ﬁttings and clamps; replace as needed. Clean the outside of the radiator and air conditioning condenser. To help ensure proper operation, a pressure test of the cooling system and pressure cap is recommended at least once a year.
Page 402: Part D: Recommended Fluids And Lubricants
Part D: Recommended Fluids and Lubricants Fluids and lubricants identiﬁed below by name, part number or speciﬁcation may be obtained from your dealer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Engine Oil Certiﬁed for Gasoline Engines starburst symbol.
Page 403: Part E: Maintenance Record
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service and any additional information from “Owner Checks and Services” or “Periodic Maintenance” on the following record pages. Also, you should retain all maintenance receipts. Maintenance Record Odometer Date...
Page 404 Maintenance Record (cont’d) Odometer Date Serviced By Maintenance Record Reading 6-18...
Page 405 Section 7 Customer Assistance Information ...7-2 Customer Satisfaction Procedure ...7-2 Online Owner Center ...7-3 Customer Assistance for Text Telephone (TTY) Users ...7-4 Customer Assistance Offices ...7-4 GM Mobility Program for Persons with Disabilities ...7-5 Roadside Assistance Program ...7-6 Courtesy Transportation ...7-7 Customer Assistance Information Reporting Safety Defects ...7-9 Reporting Safety Defects to the United States...
Page 406: Customer Assistance Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Pontiac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 407: Online Owner Center
The BBB Auto Line Program is an out of court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New Vehicle Limited Warranty. Although you may be required to resort to this informal dispute resolution program prior to ﬁling a court action, use of the program is free of charge and your case will generally be heard within 40 days.
Page 408: Customer Assistance For Text Telephone (Tty) Users
Customer Assistance Offices Pontiac encourages customers to call the toll-free number for assistance. If a U.S. customer wishes to write to Pontiac, the letter should be addressed to Pontiac’s Customer Assistance Center. United States – Customer Assistance Pontiac-GMC Customer Assistance Center P.O.
Page 409: Gm Mobility Program For Persons With Disabilities
Overseas – Customer Assistance Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) – Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col.
Page 410: Roadside Assistance Program
Roadside Assistance Program Security While You Travel 1-800-ROADSIDE (1-800-762-3743) As the proud owner of a new Pontiac vehicle, you are automatically enrolled in the Pontiac Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
Page 411: Courtesy Transportation
Pontiac reserves the right to limit services or reimbursement to an owner or driver when, in Pontiac’s judgement, the claims become excessive in frequency or type of occurrence. While we hope you never have the occasion to use our service, it is added security while traveling for you and your family.
Page 412: Transportation Options
Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait Pontiac helps minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following:...
Page 413: Reporting Safety Defects
Additional Program Information Courtesy Transportation is available during the Bumper-to-Bumper warranty coverage period, but it is not part of the New Vehicle Limited Warranty. A separate booklet entitled Warranty and Owner Assistance Information furnished with each new vehicle provides detailed warranty coverage information. Courtesy Transportation is available only at participating dealers and all program options, such as shuttle service, may not be available at every dealer.
Page 414: Reporting Safety Defects To The Canadian Government
In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. Please call us at 1-800-762-2737, or write: Pontiac-GMC Customer Assistance Center P.O. Box 33172 Detroit, MI 48232-5172 In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French).
Page 415: Owner's Information
Owner’s Information Owner publications are written speciﬁcally for owners and intended to provide basic operational information about the vehicle. The owner’s manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner’s Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00 Without Portfolio: Owner’s Manual only.
Page 416 NOTES 7-12...
Page 417 A/C OFF FOR ENGINE PROTECTION ... 3-65 Accessory Power Outlets ... 3-23 Adding Washer Fluid ... 5-44 Additional Program Information ... 7-9 Additives, Fuel ... 5-6 Add-On Electrical Equipment ... 5-99 Adjusting the Speakers (Balance/Fade) ... 3-92, 3-103, 3-117 Air Bag Readiness Light ...
Page 418 Automatic Transaxle ... 5-24 Fluid ... 5-24 Operation ... 2-22 Automatic Transaxle Check ... 6-11 Automatic Transaxle Shift Lock Control System Check ... 6-12 Backglass Antenna ... 3-132 Backing Up ... 4-41 Base Level DIC ... 3-45 Battery ... 5-48 Battery Replacement ...
Page 419 Center High-Mounted Stoplamp (CHMSL) ... 5-64 Chains, Tires ... 5-77 CHANGE OIL SOON ... 3-66 CHARGING SYSTEM FAILURE ... 3-67 Check Engine Light ... 3-40 Check Engine Light ... 3-40 CHECK GAS CAP ... 3-67 CHECK TIRE PRESSURE ... 3-68 Checking Coolant ...
Page 420 Cruise Control ... 3-8 Cruise Control Lever ... 3-8 CRUISE SET ... 3-69 Current and Past Model Order Forms ... 7-11 Customer Assistance Information Courtesy Transportation ... 7-7 Customer Assistance for Text Telephone (TTY) Users ... 7-4 Customer Assistance Offices ... 7-4 Customer Satisfaction Procedure ...
Page 421 Electrical System Add-On Equipment ... 5-99 Fuses and Circuit Breakers ... 5-99 Headlamp Wiring ... 5-99 Power Windows and Other Power Options ... 5-99 Windshield Wiper Fuses ... 5-99 Emergency Trunk Release Handle ... 2-11 Emissions Inspection and Maintenance Programs ... 3-42 Engine Air Cleaner/Filter ...
Page 422 Folding Rear Seat ... 1-8 Following Distance ... 4-41 Footnotes ... 6-5 Front Reading Lamps ... 3-18 Front Seat Storage Net ... 2-37 Front Turn Signal, Parking and Fog Lamps ... 5-62 Fuel Additives ... 5-6 California Fuel ... 5-5 Filling a Portable Fuel Container ...
Page 423 HOT TRANS FLUID ... 3-72 How to Add Coolant to the Coolant Recovery Tank ... 5-35 How to Add Coolant to the Radiator ... 5-37 How to Add Fluid ... 5-26 How to Check and Add Oil ... 5-22 How to Check Power Steering Fluid ... 5-42 How to Check ...
Page 424 Lamps Exterior ... 3-12 Interior ... 3-16 Lap-Shoulder Belt ... 1-15, 1-24 Last Door Closed Locking ... 2-8 LATCH System Child Restraints ... 1-41 Securing a Child Restraint Designed for the LATCH System ... 1-43 Leaving Your Vehicle ... 2-9 Leaving Your Vehicle With the Engine Running ...
Page 425 Maintenance Schedule (cont.) Brake System Inspection ... 6-15 Engine Cooling System Inspection ... 6-15 Exhaust System Inspection ... 6-14 Fuel System Inspection ... 6-14 How This Section is Organized ... 6-3 Introduction ... 6-2 Maintenance Requirements ... 6-2 Part A - Scheduled Maintenance Services ... 6-4 Part B - Owner Checks and Services ...
Page 426 ® OnStar System ... 2-35 ® OnStar Virtual Advisor ... 2-36 Other Warning Devices ... 3-5 Outlet Adjustment ... 3-29 Outside Convex Mirror ... 2-34 Power Mirrors ... 2-34 Overhead Console Reading Lamps ... 3-18 Overhead Console ... 2-36 Overheated Engine Protection Operating Mode ... 5-30 Overseas –...
Page 427 Questions and Answers About Safety Belts ... 1-14 Radiator Pressure Cap ... 5-29 Radio Data System (RDS) ... 3-89, 3-100, 3-114 Radio Messages ... 3-95, 3-106 Radios ... 3-88 Care of Your Cassette Tape Player ... 3-130 Care of Your CD Player ... 3-131 Care of Your CDs ...
Page 428 Roadside Assistance Program ... 7-6 Rocking Your Vehicle To Get It Out ... 4-33 Running Your Engine While You Are Parked ... 2-32 Safety Belt Pretensioners ... 1-28 Reminder Light ... 3-34 Safety Belts Care of ... 5-93 Driver Position ... 1-15 How to Wear Safety Belts Properly ...
Page 429 Setting the Time ... 3-88 Setting the Tone (Bass/Treble) ... 3-92, 3-103, 3-117 Sheet Metal Damage ... 5-95 Shifting Into Park (P) ... 2-28 Shifting Out of Park (P) ... 2-30 Shoulder Belt Height Adjuster ... 1-17 Skidding ... 4-18 Some Other Rainy Weather Tips ...
Page 430 Throttle System Inspection ... 6-15 Tilt Wheel ... 3-5 Tire Inﬂation Check ... 6-10 Tires ... 5-68 Buying New Tires ... 5-73 Chains ... 5-77 Changing a Flat Tire ... 5-78 Compact Spare Tire ... 5-89 If a Tire Goes Flat ... 5-78 Inﬂation -- Tire Pressure ...
Page 431 United States – Customer Assistance ... 7-4 Uplevel DIC with Trip Computer ... 3-53 Up-Shift Light ... 3-35 Used Replacement Wheels ... 5-76 Using Cleaner on Fabric ... 5-91 Using Song List Mode ... 3-126 Variable Effort Steering ... 4-14 Vehicle Control ...
Page 432 Windshield Washer ... 3-7 Fluid ... 5-43 Windshield Washer Fluid Level Check ... 6-10 Windshield Washer Lever ... 3-6 Windshield Wiper Blade Replacement ... 5-67 Fuses ... 5-99 Windshield Wipers ... 3-6 Winter Driving ... 4-28 Wiper Blade Check ... 6-11 XM™...

Pontiac 2004 Grand Prix Owner's Manual

Table of Contents

Seats and Restraint Systems

Features and Controls

Instrument Panel

Section 4 Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Section 5 Service and Appearance Care

Service

Fuel

Checking Things under the Hood

Maintenance Schedule

Headlamp Aiming

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

Appearance Care

Vehicle Identiﬁcation

Electrical System

Capacities and Speciﬁcations

Quick Links

Chapters

Related Manuals for Pontiac 2004 Grand Prix

Summary of Contents for Pontiac 2004 Grand Prix