Wlan Interface Setup - Tally Dascom DL-200 User Manual

Tally Dascom DL-200

3.5 WLAN Interface Setup

If your printer connected to the computer with Wireless Ethernet, there are two kinds of modes: AP
mode and STA mode.
AP means Access Point (AdHoc Mode). When the printer is working under AP mode, it works as

an access point to the cable network for the user.
STA means Station mode (Infra Structure Mode). When the printer is working under STA mode, it

works as a wireless terminal device. It is discoverable and choose access point.
We would suggest you use AP mode for your initial usage. Factory setting: AP mode, at the
convenience of users to change Wi-Fi parameters. Users can get access via setup tool to change
Wi-Fi parameters, such as IP address, network name, or switching to STA mode.
(1) Connect the PC to the printer with a USB cable. Turn on the printer.
(2) Select USB interface in the setup tool. And then click "Wi-Fi Setup".
(3) You could change the working mode, SSID, DHCP, IP address or other settings. And then enter
Confirm to save the new setting.
39
User Guide V1.3