Configuring Printer - Tally Dascom DL-200 User Manual

Tally Dascom DL-200

3.3.2 Configuring Printer

After model and interface setting, select "Printer Setup" tab for configurations.
Setup Items Explanation

Setup Items Options
Page Mode On, Off
Print Density 1, 2, 3, 4, 5, 6
Label Paper,
Print Media
Continuous Paper
Printer Language English, Chinese
Thermal Transfer,
Print Method
Direct Thermal
Peeler Off, On
Print Speed 1, 2, 3, 4
Emulation ZPL, EPL, TSPL
Off, Full Cut,
Cut Mode
Partial Cut
Default Description
Use un-continuous paper set to on; Use continuous
On
paper set to off.
Adjust print density. Level 1 is lowest, Level 6 is
2
highest.
Label
Select the actual media type.
Paper
Set the printer's system language, Chinese or
English
English.
Thermal Use ribbon select thermal transfer; Use thermal
Transfer paper select direct thermal
Off Enable peeler or not
Adjust the print speed. Level 1 is lowest, Level 4 is
4
highest.
Select ZPL/EPL while using un-continuous paper;
ZPL
Select ESC/POS while using continuous paper.
Off Set the printer's cutting mode.
35
User Guide V1.3