Esaote MyLabX6 Getting Started
  1. Manuals
  2. Brands
  3. Esaote Manuals
  4. Medical Equipment
  5. MyLabX6
  6. Getting started

Esaote MyLabX6 Getting Started

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rev. 08
February 2020
MyLabX6
MyLabX7
GETTING STARTED
350031500

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MyLabX6 and is the answer not in the manual?

Questions and answers

Related Manuals for Esaote MyLabX6

Summary of Contents for Esaote MyLabX6

  • Page 1 Rev. 08 February 2020 MyLabX6 MyLabX7 GETTING STARTED 350031500...
  • Page 2 MyLab - G E T T I N G S T A R T E D...

  • Page 3: Manufacturer's Address

    MyLabX6 MyLabX7 For US Customers: US Federal Law restricts this device to sale, distribution and use by or on the order of a physician. All information included in this manual is relative to the following Esaote ultrasound equipments: MyLabX6 MyLabX7...

  • Page 4: Guarantee

    Guarantee The information in this document is the exclusive property of Esaote S.p.A. and is reserved. Reproduction or distribution in any form is strictly prohibited. All rights reserved. All screenshots, pictures and graphics in this manual are used for descriptive purposes only and may be different from what you see on the screen or device.

  • Page 5: Ec Declaration Of Conformity

    EC Declaration of Conformity MyLab - G E T T I N G S T A R T E D...
  • Page 6 MyLab - G E T T I N G S T A R T E D...

  • Page 7: Red Declaration Of Conformity

    RED Declaration of Conformity MyLab - G E T T I N G S T A R T E D...
  • Page 8 MyLab - G E T T I N G S T A R T E D viii...
  • Page 9 MyLab - G E T T I N G S T A R T E D...
  • Page 10 MyLab - G E T T I N G S T A R T E D...

  • Page 11: Table Of Contents

    I N D E X Table of Contents Manufacturer’s Address ................i-iii Important Information ................i-iii Guarantee..................... i-iv Trade Marks....................i-iv EC Declaration of Conformity..............i-v RED Declaration of Conformity ............i-vii 1 Introduction.................. 1-1 Safety and Standards................1-1 Getting Started ................... 1-1 Probes and Consumables..............
  • Page 12 I N D E X Communication Systems and MyLab..........2-6 Wireless Requirements ................2-7 3 System Overview ................3-1 About the system..................3-1 Intended Use.....................3-1 Clinical Applications and Supporting Probes ........3-2 Patient population..................3-6 Operator profile ..................3-6 Contraindications ..................3-6 System Overview..................3-6 Control Panel Assembly................3-8 Console ......................3-8 Electrical Connection ................3-9 Probe Connections ................3-10 Control Panel Assembly Orientation .............3-12...
  • Page 13 I N D E X Touchscreen Section................5-5 On/Off Button .................. 5-5 Menu Button..................5-6 ETOUCH Button ................5-6 Touchscreen..................5-6 TGC Sliding ..................5-9 Information about the Screen Layout ............. 5-9 Heading Area..................5-10 Footer Area .................... 5-10 Trackball .................... 5-10 Wi-Fi ....................
  • Page 14 I N D E X FOOTSWITCH Folder..............6-16 PROBE BUTTONS Folder ............6-16 RAW DATA Folder.................6-16 KEYBOARD BUTTONS Folder ..........6-16 Security.....................6-16 Licenses Manager ...................6-16 License Activation ................6-17 Import/Export Menu................6-18 EXPORT Folder ................6-18 IMPORT Folder ................6-19 System Info .....................6-20 Encryption Mode................6-20 7 Performing an Exam..............7-1 Starting an Exam ..................7-1 Entering Patient and Application data..........7-3 Filling the Patient ID screen .............7-3...
  • Page 15 I N D E X Image Files....................9-5 Software ....................9-5 Biometry....................9-5 Keyboard ....................9-5 Dimensions....................9-5 Weight ....................... 9-6 IP Grade....................9-6 Power supply.................... 9-6 Batteries..................... 9-6 Power Cables ....................9-7 Operating Requirements ................ 9-8 Storage requirements................9-8 Probe Storage Requirements ..............
  • Page 16 I N D E X MyLab - G E T T I N G S T A R T E D...

  • Page 17: Introduction

    MyLabX6 MyLabX7 this family, or  when the contents are common to the other MyLab ultrasound systems belonging to the Esaote platform. MyLab Safety and Standards  The Safety and Standard manual contains information about the patient's and operator's safety. The system's conformity standards are also indicated.

  • Page 18: Advanced Operations Manual

    NOTE Specifications subject to change without notice. Information might refer to products or modalities not yet approved in all countries. Product images are for illustrative purposes only. For further details, please contact your Esaote sales representative. This manual refers to...

  • Page 19: Intended Audience

    In case of system failure to operate correctly, the operator should contact the nearest Esaote Service Office. Special attention should be dedicated to intra-cavitary probes (e.g. vaginal, rectal or oesophageal probes). They should be cleaned according to established protocols (AIUM guidelines for cleaning probes) and should not be used if there is noticeable self-heating of the probe when operating in air.

  • Page 20: Mylab Use

    I N T R O D U C T I O N a part of a more complex diagnostic process that includes medical history, symptoms and other instrumental examinations. A proper patient ID and exact examination date and time must be always included and must appear on all recorded data and prints.

  • Page 21: Mylab Manual Conventions

    Use of the product for the purposes other than those intended and expressly stated by Esaote, as well as incorrect use or operation, may relieve Esaote or its agents from all or some responsibility for resultant noncompliance, damage, or injury.

  • Page 22: Manufacturer's Responsibility

    In this manual NOTE points out information of special interest but not NOTE related to risks for patient, operator or device. Manufacturer’s Responsibility Esaote is responsible for the safety, reliability and functioning of this product only if:  the user follows all the instructions contained in the system manuals for the use and the maintenance of this system;...

  • Page 23: Maintainability Time

    You have acquired a device (“ ”) which includes Esaote S.p.A. DEVICE proprietary software and/or software licensed by Esaote S.p.A. from one or more software licensors (“Software Suppliers”). Such software products (“ ”), as well as associated media, printed materials, and “online”...

  • Page 24: License Rights And Limitations

    For any software updates and/or upgrades installed on the Equipment after installation, the terms herein shall apply in full. License Rights and Limitations With this license, Esaote S.p.A. grants the end user the right to use the on the supplied SOFTWARE...
  • Page 25 I N T R O D U C T I O N the event of equipment transfer to third parties, are requested to notify ESAOTE S.p.A., associate company or authorized distributor of the said transfer by means of the following form, duly compiled, or written notification with the same data as specified in the form.

  • Page 26: Vigilance System

    Esaote central plants, or one of our subsidiaries, or one of our official distributors immediately through the following form, or through a communication reporting the same data contained in this form.
  • Page 27 I N T R O D U C T I O N POST-MARKET SURVEILLANCE FORM ACCIDENT REPORT FORM To: ESAOTE S.p.A. Quality Assurance Department Via Enrico Melen, 77 16152, Genova, Italy [or associate company] [or authorized distributor] ESAOTE system/device name:................
  • Page 28 I N T R O D U C T I O N MyLab - G E T T I N G S T A R T E D 1 - 12...

  • Page 29: Additional Information On Safety

    Chapter 2. Additional Information on Safety  This chapter provides additional information on safety specifically for MyLab products. Please read the “Safety and Standards” manual carefully for a complete overview of all safety aspects of products. MyLab Environmental Safety Special waste The system contains lithium-ion batteries.

  • Page 30: Electromagnetic Compatibility

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Electromagnetic Compatibility This system was designed for use in the electromagnetic environments declared in the tables below, in compliance with standard IEC 60601-1- 2:2014 (4 edition).

  • Page 31: Essential Performance

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Use of accessories, transducers and cables other than those specified or WARNING provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this...

  • Page 32: Electromagnetic Immunity For All Medical Equipment

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Electromagnetic Immunity for All Medical Equipment MyLab system is intended for use in the electromagnetic environment specified below. The MyLab customer or the user of the system should assure that it is used in such an environment.

  • Page 33: Electromagnetic Immunity For Medical Equipment Not Life Supporting

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y MyLab system is intended for use in the electromagnetic environment specified below. The MyLab customer or the user of the system should assure that it is used in such an environment.

  • Page 34: Recommended Distances Between Radiofrequency (Rf)

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Recommended Distances between Radiofrequency (RF) Communication Systems and MyLab  As stated in the “Safety and Standards” manual, it is recommended not to use radiofrequency (RF) transmission systems near the ultrasound system.

  • Page 35: Wireless Requirements

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Wireless Requirements is equipped with built-in wireless capability. MyLab When wireless is active, the operator should make sure to stay at a minimum distance of 20 cm from the rear of the equipment.
  • Page 36 A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y MyLab - G E T T I N G S T A R T E D 2 - 8...

  • Page 37: System Overview

    Chapter 3. System Overview are professional, innovative and versatile real-time MyLabX6 MyLabX7 high-resolution ultrasound systems. The wide range of probes makes them suitable for many clinical applications. are based on a mainframe easily movable platform. MyLabX6 MyLabX7 have four swiveling wheels, they have a range of height...

  • Page 38: Clinical Applications And Supporting Probes

    S Y S T E M O V E R V I E W Clinical Applications and Supporting Probes A variety of ultrasound probes can be connected to MyLabX6 MyLabX7 Table 3-1: Available probes and applications Probe Applications Biopsy AC2541...
  • Page 39 S Y S T E M O V E R V I E W Probe Applications Biopsy SI2C41 Abdominal, Breast, Gynecology, Musculo-skeletal, Obstetric and Fetal, Small Organ, Urology, Vascular SL1543 Abdominal, Breast, Musculo-skeletal, Pediatric, Small Organ, Thyroid, Vascular SL2325 Breast, Musculo-skeletal, Pediatric, Small Organ, Thyroid, Vascular SL3116 Breast, Musculo-skeletal, Pediatric, Small Organ, Thyroid, Vascular SP2442...
  • Page 40 System applications are dependent on your system configuration, NOTE transducer and exam type. Not all applications are approved in all Countries. Please refer to your Esaote local representative for further information. MyLab - G E T T I N G S T A R T E D...

  • Page 41: Patient Population

    Sex: male and female  Weight: all weight categories (in terms of Body Mass Index)  Height: no limitations Operator profile are designed for operators who are qualified and MyLabX6 MyLabX7 trained in using ultrasound system:  Sonographers  Cardiologist ...
  • Page 42 S Y S T E M O V E R V I E W The system consists of a control panel assembly with the LCD and a console with the system electronics and connectors. The console top is equipped to house peripherals. It has a rear mains switch to power up the console, the screen and the peripheral devices.

  • Page 43: Control Panel Assembly

    S Y S T E M O V E R V I E W Control Panel Assembly The control panel assembly includes the system handle, all system controls, the touchscreen, the loud speakers, the probes, gel and ECG cables holders. The LCD is installed on top of the assembly.

  • Page 44: Electrical Connection

    S Y S T E M O V E R V I E W Peripherals Housing The console top is equipped to house peripheral devices (for example a USB printer); the peripheral can be easily connected and disconnected and secured to the system console with belts.

  • Page 45: Probe Connections

    S Y S T E M O V E R V I E W Fig. 3-3: Main switch on the rear of the system Procedure 1. Open the rear door. 2. Plug in the power cord. 3. Close the rear door by letting the cord go through the lower slot.
  • Page 46 S Y S T E M O V E R V I E W All small connector probes can be used with probe adapter, with the NOTE exception of transesophageal probes, phased array probes and SB2C41 Bi- Scan probe. Biopsy procedure can not be activated on probes connected to the system through the probe adapter.

  • Page 47: Control Panel Assembly Orientation

    S Y S T E M O V E R V I E W Control Panel Assembly Orientation This assembly can be pushed up/down and laterally oriented to maximize operator comfort; also, it can be rotated by 180° for optimal handling (closed position).
  • Page 48 S Y S T E M O V E R V I E W When rotating the keyboard, pay attention not to damage the peripherals CAUTION placed on the console. If the peripheral falls down, injury may be caused. MyLab - G E T T I N G S T A R T E D 3 - 12...
  • Page 49 S Y S T E M O V E R V I E W MyLab - G E T T I N G S T A R T E D 3 - 13...

  • Page 50: Batteries

    S Y S T E M O V E R V I E W Batteries can be equipped with an internal battery pack. MyLab The battery pack is installed by Esaote personnel. This person will be NOTE responsible for its installation and for ensuring that the system is working properly.

  • Page 51: First Use

    Esaote recommends to replace the battery pack every three years. The battery pack has to be replaced by Esaote personnel. This person will NOTE be responsible for ensuring that the system is working properly.

  • Page 52: Error Messages

     Save anyway the log file (refer to the “Archive” section of the Advanced Operation manual for further information) and contact the Esaote Service department. Errors in Battery Management The battery icon is shown crossed out whenever an error in the battery management occurs.

  • Page 53: Power Supply Error Messages

    Switch on again and check whether the MyLab message is still present. If the problem persists, contact Esaote personnel. Error #4 This error indicates that at least one of the batteries has reached the maximum temperature allowed for its working conditions.
  • Page 54 Please, contact the Service department. If this situation occurs, press and then shut down the system. Contact the Esaote Service department. Error #8 This error indicates that a fault of the impulse voltages occurs. The system displays the following message: Error #8: wrong impulse voltage.

  • Page 55: Preparing The System

    Chapter 4. Preparing the System The system will be installed by Esaote personnel. Esaote personnel will be responsible for opening the packaging and ensuring that the system is correctly programmed and operational. The information and procedure provided in this chapter will guide to prepare the system for use.

  • Page 56: Connecting Peripherals

    MyLab usually already mounted and connected. The first mounting and connecting will usually be performed by an Esaote technician. Esaote suggests to contact its Service representative to install any auxiliary NOTE device. Before installing the peripheral devices, make sure that the system is switched off and unplug the power cable from the mains outlet.

  • Page 57: Medical Environments

    P R E P A R I N G T H E S Y S T E M Furthermore, all configurations shall comply with the requirements for medical electrical systems (see IEC 60601-1-1 or clause 16 of the 3rd Edition of IEC 60601-1, respectively).
  • Page 58 B or area C connected by cable (USB, HDMI,...) - Auxiliary device must be powered through a safety insulation transformer complying to IEC 60601. Auxiliary Devices must be approved by Esaote. Auxiliary Devices must also NOTE comply with EN 60601-1-2 safety standard and subsequent amendments or the electromagnetic compatibility.
  • Page 59 The system must be powered so to satisfy the electrical safety requirements, WARNING as specified in the “Safety and Standards” manual. Esaote recommends running a current leakage (patient and environment) test when installing in order to check whether the applicable limits of standard EN60601-1 are not being surpassed.

  • Page 60: B/W Thermal Medical Usb Printer Housing

    P R E P A R I N G T H E S Y S T E M B/W Thermal Medical USB Printer housing Those kinds of printers can be hosted in the lateral storage area. Procedure 1. Open the rear door. 2.

  • Page 61: Auxiliary Monitor

    P R E P A R I N G T H E S Y S T E M 8. Switch the printer on. Always power any USB device (such as USB printers or external USB WARNING archiving devices) through the trolley. Now the system can be connected to the mains and the entire configuration can be powered through the main switch.

  • Page 62: External Cd/Dvd And Hdd Drives

    Mechanical damage may MyLab occur if the drive falls down. The External Slim DVD Writer kit supplied by Esaote includes a Velcro tape to easily and securely fix it to console. Stick the tape both on the MyLab...
  • Page 63 P R E P A R I N G T H E S Y S T E M 10. Lock the monitor arm by rotating the lever on the monitor arm on lock position. 11. Release the wheel brakes and set the steering locks for comfortable moving.

  • Page 64: Mylab Quick Displacement

    P R E P A R I N G T H E S Y S T E M Fig. 4-4: Transporting Configuration  Protect the screen orientable arm so that no lateral movements are possible (for example with film).  Use the brakes to lock the system.
  • Page 65 P R E P A R I N G T H E S Y S T E M The touchscreen displays a message indicating the residual time after which will automatically start the shut down procedure. MyLab Fully charged batteries ensure more than half an hour of self-powering. NOTE Move the system to the working position and connect it to the mains: the LCD display is automatically turned on and the system is ready for its use.
  • Page 66 P R E P A R I N G T H E S Y S T E M MyLab - G E T T I N G S T A R T E D 4 - 12...

  • Page 67: Using The System

    Chapter 5. Using the System This chapter provides a brief description of the system controls.  Refer to the “Advanced Operations” Manual for further detailed information. Connecting the system to the mains The power plug and the electrical main switch are located on the rear-bottom of the system.

  • Page 68: System Controls

    U S I N G T H E S Y S T E M 6. Connect the network and other cables from the system to the appropriate wall plugs. 7. Plug the cable to a reliable grounding power outlet to assure adequate grounding.
  • Page 69 U S I N G T H E S Y S T E M Table 5-1: Exam Control Buttons Button Description Gives access, at any time, to the archived data. ARCHI VE Closes the current exam archiving the patient’s data and producing EN D EXAM a report on the exam.

  • Page 70: Trackball

    U S I N G T H E S Y S T E M Button Description Activates three dimension features; further details on how to use 3D/4D them are described in the “Advanced Operations” manual In B-Mode or CFM, this button allows to interactively activate the LI N E UPDATE cursor or disable it to select the M-Mode or Doppler line.

  • Page 71: Touchscreen Section

    U S I N G T H E S Y S T E M The cursor function is indicated below the image. When several cursors are present on the screen, switches between the active cursors. Yellow ACTI O N indicates active cursor function while white next cursor function. Mouse Mode In its mouse mode, the trackball can be used to move a pointer on the screen, to access to the thumbnails of the images, displayed on the right side of the...

  • Page 72: Menu Button

    U S I N G T H E S Y S T E M Optional Batteries When is equipped with optional batteries, the same button places the MyLab system in stand-by, partially shutting it down: in this case the initialization phase at start up is significantly reduced.
  • Page 73 U S I N G T H E S Y S T E M Exam Panel Layout This layout is used for standard exam functions necessary to perform the exam. The touchscreen is organized in four main areas. Fig. 5-1: CFM touchscreen 1.
  • Page 74 U S I N G T H E S Y S T E M Table 5-4: Touchscreen key status Active Key with Disabled Key Active Key Selected Key Submenu Gray text on dark White text on light As Active Key with Blue text on dark gray background gray background...

  • Page 75: Tgc Sliding

    U S I N G T H E S Y S T E M Alphanumeric The alphanumeric keyboard is based on the QWERTY standard. The Keyboard Layout alphanumeric keys are used to enter text data in the enabled windows. The Caps Lock key sets the keyboard to upper case characters.

  • Page 76: Heading Area

    U S I N G T H E S Y S T E M Controls on the Screen Layout are indicated in the operator manuals with , while strings and fields are indicated B O L D B L A C K C A P I T A L L E T T E R S with NORMAL BLACK CAPITAL LETTERS Symbol on Screen...

  • Page 77: Archival Media

    U S I N G T H E S Y S T E M Archival Media Archival media are shown on the left. The icon is shown crossed out whenever there are management problems involving the specific archival system.  For more details on data archival, consult the relevant section on the “Advanced Operations”...

  • Page 78: Image Area

    U S I N G T H E S Y S T E M Image Area The visualization of the image depends on various factors such as the active mode, the selected application and the probe. The following figure shows the elements in the image area that are independent of these factors.

  • Page 79: Machine Parameters

    U S I N G T H E S Y S T E M Machine Parameters Table 5-6: Imaging Parameters Displayed Parameter Description format Imaging or TEI (Tissue Enhancement Imaging) mode: General, Resolution or Penetration (L: Low, H: High) Imaging gain (Min,%, Max) Auto Adjust nn mm Depth...

  • Page 80: Thumbnails Area

    U S I N G T H E S Y S T E M Table 5-8: Doppler Parameters Displayed Parameter Description format nnn MHz Doppler frequency or TV (Tissue Velocity) frequency when enabled Doppler gain (Min,%, Max) nnn kHz Pulse Repetition Frequency Dynamic range / Rejection nnn Hz Wall filter...

  • Page 81: Customizing The System

    Chapter 6. Customizing the System can be customized to increase efficiency and streamline your work- MyLab flow. You can do the following:  Create preset designed specifically for the exams you perform.  Change system settings to reflect your needs. ...
  • Page 82 C U S T O M I Z I N G T H E S Y S T E M The menu is organized in three areas:  Clinical Configuration, the upper area shows all options relating to Clinical Settings or Presets, ...
  • Page 83 C U S T O M I Z I N G T H E S Y S T E M System Settings System Settings define the ’s parameters related to a specific system MyLab profile:  Profile Manager,  DICOM configuration, ...

  • Page 84: Generic Configuration Procedure

    C U S T O M I Z I N G T H E S Y S T E M Generic Configuration Procedure Once accessed the configuration screen for the parameter you want to set, a common set of commands is available and a common setting procedure can be used.

  • Page 85: Clinical Configurations

    C U S T O M I Z I N G T H E S Y S T E M Clinical Configurations  This chapter explains how to set many options. For configurations not MyLab described here refer to relevant chapters in the “Advanced Operations” manual. Real Time Preset A Preset is a group of settings that optimizes the system for a specific type of exam.

  • Page 86: Creating A New Preset From Real-Time

    C U S T O M I Z I N G T H E S Y S T E M Creating a new preset from Real-Time Procedure To create a new preset or modify an existing one:  Adjust the real time image as desired in all modes (2D, CFM and Doppler).
  • Page 87 C U S T O M I Z I N G T H E S Y S T E M  on the right the menu to record the macro and to edit the customized buttons,  on the bottom the fields where customized touchscreens are named and described.

  • Page 88: System Settings

    C U S T O M I Z I N G T H E S Y S T E M button adds a new tab that will be automatically displayed. Place N E W T A B the cursor on the tab and press to change its name, using the EN TER alphanumeric keyboard to edit it.

  • Page 89: Corrupted System Profile

    (no component has to be without any setting). Should this not solve the problem, contact Esaote personnel. Center ID Center ID allows to set the center name displayed in the Heading Area of the screen and the center information shown in the report.

  • Page 90: General Setup

    C U S T O M I Z I N G T H E S Y S T E M General Setup The menu is organized in internal folders, selectable using the tabs displayed on the top of the menu. Fig.

  • Page 91: Measure Units Folder

    C U S T O M I Z I N G T H E S Y S T E M Set Time Using the keyboard set the time. Time Format The time format is available on a 24 or 12 hour basis. In the 12 hour option, the time is shown as AM and PM.

  • Page 92: Control Panel Folder

    C U S T O M I Z I N G T H E S Y S T E M CONTROL PANEL Folder The table below lists and explains the available fields and the corresponding actions. Table 6-3: Control Panel Folder Fields Action TRACKBALL SPEED...

  • Page 93: Field Shutdown Type

    C U S T O M I Z I N G T H E S Y S T E M Fields Action DIRECT PROBE When checked, it allows to show on the SELECTION touchscreen work flow area icons of connected probes for quick change.

  • Page 94: Field Available Qwerties

    If a virus is found, it is advisable to switch off the , disconnect it from MyLab the data network and call the Esaote service, which will check for the presence of a virus and restore the system. Field AVAILABLE QWERTIES...
  • Page 95 C U S T O M I Z I N G T H E S Y S T E M Table 6-5: Application Preset Folder Fields Action ABSOLUTE ANGLE The angle correction factor of linear probes can be correlated either to the line cursor or to the line perpendicular to the transducer surface (absolute angle).

  • Page 96: Footswitch Folder

    C U S T O M I Z I N G T H E S Y S T E M FOOTSWITCH Folder This option is used to set which function is associated to each pedal (left, middle and right) of the footswitch. Select from the curtain menu the function then press S A V E PROBE BUTTONS Folder...

  • Page 97: License Activation

    C U S T O M I Z I N G T H E S Y S T E M Press then to enter the License Manager Menu. It is L I C E N S E S M EN U organized in internal folders, selectable using the tabs displayed on the top of the menu.

  • Page 98: Import/Export Menu

    C U S T O M I Z I N G T H E S Y S T E M Import/Export Menu The menu is organized with internal folders, selectable using the tabs displayed on the top of the menu. Fig.

  • Page 99: Import Folder

    C U S T O M I Z I N G T H E S Y S T E M  customized SAVING OPTIONS  customized center configuration ( CENTER ID  customized export settings; MULTIMEDIA  customized configurations; NETWORK ...

  • Page 100: System Info

    ENCRYPTION MODE Encryption Mode Encryption allows to preserve health data storage confidentiality. Encryption can be performed by Esaote Service personnel only. Encryption can be applied to the internal hard disk and to one or more external USB memory devices. At the end of encryption a recovery key will be given to you. The recovery key is stored on USB pen drive, or on file, or by printing it.

  • Page 101: Performing An Exam

    Chapter 7. Performing an Exam This chapter describes the procedures commonly used in performing patient exams with . These procedures include entering patient and application MyLab data, acquiring images, making measurements and calculations; annotating and reviewing images.  Read the “Safety and Standards” manual carefully: all the safety characteristics, cautions and warnings listed there apply to all exams.
  • Page 102 P E R F O R M I N G A N E X A M Fig. 7-1: Patient ID screen Fig. 7-2: Probe, Application, Preset touchscreen Starting exam The steps to be followed to start an exam are: procedure 1.

  • Page 103: Entering Patient And Application Data

    P E R F O R M I N G A N E X A M Entering Patient and Application data There are two ways to enter patient data:  Filling the Patient ID screen,  Retrieving existing data from archive. Filling the Patient ID screen The Patient ID screen is used to enter patient data and application data, when applicable.

  • Page 104: Selecting Probe

    P E R F O R M I N G A N E X A M At any time during the exam, Patient Data can be viewed and modified by PATIENT ID pressing PATIENT ID Do not use to start a new exam of a new patient as it will update WARNING existing patient’s data with new entries.

  • Page 105: Selecting Application

    P E R F O R M I N G A N E X A M PROBE At any time during the exam, a different probe can be selected tapping or the new probe key on the touchscreen work flow area (available when is enabled).

  • Page 106: Performing The Exam

    P E R F O R M I N G A N E X A M Performing the Exam offers a set of imaging modes to cover a variety of imaging needs. By MyLab pressing the different mode buttons the specific mode is activated in real time.

  • Page 107: Reviewing Images

    P E R F O R M I N G A N E X A M Reviewing Images EXAM REVIEW During the exam, taping enables reviewing of the saved images and sequences, and the trackball automatically changes to pointer mode, allowing you to scroll through the thumbnails and select the item to be reviewed.
  • Page 108 P E R F O R M I N G A N E X A M At power-up, the system prompts the operator to archive the last exam NOTE performed if the system was switched off without first closing the exam in progress.

  • Page 109: System Maintenance

    Chapter 8. System Maintenance To ensure that operates over time at its maximum efficiency, Esaote MyLab recommends to perform maintenance procedures regularly. Maintenance procedures should be performed both by the user itself and by Esaote authorized service personnel. The maintenance operations and schedule are provided in the table below.
  • Page 110 Periodic maintenance operations that require the access to the system can NOTE be performed only by trained personnel: contact your local Esaote representative for further information on required periodic inspections. Only trained persons are allowed to perform the safety inspection mentioned above.

  • Page 111: Cleaning Operations

    S Y S T E M M A I N T E N A N C E Cleaning Operations Periodic cleaning of the system and any connected devices is important. In the event of poor maintenance, dust and dirt can compromise the reliability and performance of and connected devices.

  • Page 112: Cleaning Control Panel And System

    S Y S T E M M A I N T E N A N C E Check the instructions supplied by the manufacturer of the cleaning agents for possible stricter limitation. Do not use hot cleaning agents for cleaning the equipment.

  • Page 113: Cleaning Probe And Gel Holders

    S Y S T E M M A I N T E N A N C E Invisible laser radiation. Do not view directly with optical instruments. WARNING Class 1M laser products. Do not remove the ball from the socket. Do not try to disassemble the trackball during the cleaning of the WARNING removable sealing ring.

  • Page 114: Cleaning The Lcd Case

    S Y S T E M M A I N T E N A N C E Never spray or pour any liquid directly onto the screen or case. Overspray or liquid may cause electrical shock. WARNING Cleaning the LCD case Use a soft, dry cloth to wipe the surface of the case.

  • Page 115: Technical Specifications

    Licenses enable specific functions of the system, they are linked to the system serial number and are, therefore, unique. They should be carefully stored. The system is delivered by Esaote, with the licenses already installed. Additional features can be added buying the related license.
  • Page 116 T E C H N I C A L S P E C I F I C A T I O N S System Features Depending on the model, can be configured with one or more of the MyLab following features. Table 9-2: System Features Feature Description...
  • Page 117 T E C H N I C A L S P E C I F I C A T I O N S Feature Description Mobile application which allows to remotely review MyLab MyLab Tablet images on tablet or mobile. MyLibrary Dedicated libraries for Rheumatology, MSK, Regional anesthesia, Physiotherapy and Advanced vascular.

  • Page 118: Technical Characteristics

    T E C H N I C A L S P E C I F I C A T I O N S a. Refer to www.esaote.com for further details on supported DICOM classes. b. Refer to the corresponding Sales Area manager for further information.

  • Page 119: Image Files

    In working position with gel and probe holders: 580 (L) x 12201430 (H) x 700 (D) mm 1. Refer to www.esaote.com for further details. MyLab - G E T T I N G S T A R T E D...

  • Page 120: Weight

    T E C H N I C A L S P E C I F I C A T I O N S Weight  < 65 kg (basic configuration without peripheral units) IP Grade  IP (X)0, this means models are not watertight.

  • Page 121: Power Cables

    T E C H N I C A L S P E C I F I C A T I O N S Power Cables Table 9-3: Power Cables Connector Plug Type Cord Type Length Italy EN60320/C13 I/3G CEI 23-50 H05VVF3G 4,5 m Chile...

  • Page 122: Operating Requirements

    T E C H N I C A L S P E C I F I C A T I O N S Connector Plug Type Cord Type Length Denmark EN60320/C13 DK3/HGA H05VVF3G 4,5 m SB 107-2D1 DK2- Section 1 mm 3 conductors 10A-250V South Africa...

  • Page 123: Standards

    T E C H N I C A L S P E C I F I C A T I O N S Standards Table 9-4: Standards Standard Title IEC 60601-1:2012 (Ed.3.1) Medical electrical equipment - Part 1: General EN 60601-1:2006 + CORR. 1 requirements for basic safety and essential (2006) + CORR.
  • Page 124 T E C H N I C A L S P E C I F I C A T I O N S Standard Title AIUM/NEMA UD-3:2004 Standard for Real Time Display of Thermal and (R2009) Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment.

This manual is also suitable for:

Mylabx7

Table of Contents