Esaote MyLab 9 Getting Started
  1. Manuals
  2. Brands
  3. Esaote Manuals
  4. Medical Equipment
  5. MyLab 9
  6. Getting started

Esaote MyLab 9 Getting Started

Hide thumbs
Table of Contents

Advertisement

Quick Links

Rev. 05
February 2020
MyLab 9
MyLab 9 eXP
GETTING STARTED
350035900

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MyLab 9 and is the answer not in the manual?

Questions and answers

Related Manuals for Esaote MyLab 9

Summary of Contents for Esaote MyLab 9

  • Page 1 Rev. 05 February 2020 MyLab 9 MyLab 9 eXP GETTING STARTED 350035900...

  • Page 3: Manufacturer's Address

    MyLab 9 eXP For US Customers: US Federal Law restricts this device to sale, distribution and use by or on the order of a physician. All information included in this manual is relative to the following Esaote ultrasound equipments: MyLab 9...

  • Page 4: Guarantee

    Guarantee The information in this document is the exclusive property of Esaote S.p.A. and is reserved. Reproduction or distribution in any form is strictly prohibited. All rights reserved. All screenshots, pictures and graphics in this manual are used for descriptive purposes only and may be different from what you see on the screen or device.

  • Page 5: Ec Declaration Of Conformity

    EC Declaration of Conformity MyLab - G E T T I N G S T A R T E D...
  • Page 6 MyLab - G E T T I N G S T A R T E D...

  • Page 7: Red Declaration Of Conformity

    RED Declaration of Conformity MyLab - G E T T I N G S T A R T E D...
  • Page 8 MyLab - G E T T I N G S T A R T E D viii...
  • Page 9 MyLab - G E T T I N G S T A R T E D...
  • Page 10 MyLab - G E T T I N G S T A R T E D...

  • Page 11: Table Of Contents

    I N D E X Table of Contents Manufacturer’s Address ................i-iii Important Information ................i-iii Guarantee..................... i-iv Trade Marks....................i-iv EC Declaration of Conformity..............i-v RED Declaration of Conformity ............i-vii 1 Introduction.................. 1-1 Safety and Standards................1-1 Getting Started ................... 1-1 Probes and Consumables..............
  • Page 12 I N D E X Communication Systems and MyLab..........2-6 Wireless Requirements ................2-7 3 System Overview ................3-1 About the system..................3-1 Intended Use.....................3-1 Clinical Applications and Supporting Probes ........3-2 Patient population..................3-5 Operator profile ..................3-5 Contraindications ..................3-5 System Components ...................3-6 Monitor (1)....................3-8 On/Off Button (2) ..................3-8 Control Panel Assembly (3)..............3-9 Control Panel Assembly Orientation..........3-10 Pull-out Qwerty Keyboard (14) ............3-10...
  • Page 13 I N D E X Touchscreen Section................5-6 Menu Button..................5-6 Touchscreen..................5-6 Alphanumeric Keyboard Section ............5-9 Information about the Screen Layout ............. 5-9 Heading Area..................5-10 Footer Area .................... 5-10 Trackball .................... 5-10 Wi-Fi ....................5-11 Archival Media.................. 5-11 Advanced Features................
  • Page 14 I N D E X RAW DATA Folder.................6-16 KEYBOARD BUTTONS Folder ..........6-16 Security.....................6-16 Licenses Manager ...................6-16 License Activation ................6-17 Import/Export Menu................6-18 EXPORT Folder ................6-18 IMPORT Folder ................6-19 System Info .....................6-20 Encryption Mode................6-20 7 Performing an Exam..............7-1 Starting an Exam ..................7-1 Entering Patient and Application data..........7-3 Filling the Patient ID screen .............7-3 Retrieving data from archive.............7-3...
  • Page 15 I N D E X Image Files....................9-7 Software ....................9-7 Biometry....................9-7 Keyboard ....................9-7 Dimensions....................9-7 Weight ....................... 9-7 IP Grade....................9-8 Power supply.................... 9-8 Power Cables.................... 9-8 Operating Requirements ................ 9-9 Storage requirements................9-9 Probe Storage Requirements ..............9-9 European and international standards...........
  • Page 16 I N D E X MyLab - G E T T I N G S T A R T E D...

  • Page 17: Introduction

    MyLab 9 Family family, or  when the contents are common to the other MyLab ultrasound systems belonging to the Esaote platform. MyLab Safety and Standards  The Safety and Standard manual contains information about the patient's and operator's safety.

  • Page 18: Advanced Operations Manual

    NOTE Specifications subject to change without notice. Information might refer to products or modalities not yet approved in all countries. Product images are for illustrative purposes only. For further details, please contact your Esaote sales representative. This manual refers to...

  • Page 19: Intended Audience

    In case of system failure to operate correctly, the operator should contact the nearest Esaote Service Office. Special attention should be dedicated to intra-cavitary probes (e.g. vaginal, rectal or oesophageal probes). They should be cleaned according to established protocols (AIUM guidelines for cleaning probes) and should not be used if there is noticeable self-heating of the probe when operating in air.

  • Page 20: Mylab Use

    I N T R O D U C T I O N a part of a more complex diagnostic process that includes medical history, symptoms and other instrumental examinations. A proper patient ID and exact examination date and time must be always included and must appear on all recorded data and prints.

  • Page 21: Mylab Manual Conventions

    Use of the product for the purposes other than those intended and expressly stated by Esaote, as well as incorrect use or operation, may relieve Esaote or its agents from all or some responsibility for resultant noncompliance, damage, or injury.

  • Page 22: Manufacturer's Responsibility

    In this manual NOTE points out information of special interest but not NOTE related to risks for patient, operator or device. Manufacturer’s Responsibility Esaote is responsible for the safety, reliability and functioning of this product only if:  the user follows all the instructions contained in the system manuals for the use and the maintenance of this system;...

  • Page 23: Maintainability Time

    You have acquired a device (“ ”) which includes Esaote S.p.A. DEVICE proprietary software and/or software licensed by Esaote S.p.A. from one or more software licensors (“Software Suppliers”). Such software products (“ ”), as well as associated media, printed materials, and “online”...

  • Page 24: License Rights And Limitations

    For any software updates and/or upgrades installed on the Equipment after installation, the terms herein shall apply in full. License Rights and Limitations With this license, Esaote S.p.A. grants the end user the right to use the on the supplied SOFTWARE...
  • Page 25 I N T R O D U C T I O N the event of equipment transfer to third parties, are requested to notify ESAOTE S.p.A., associate company or authorized distributor of the said transfer by means of the following form, duly compiled, or written notification with the same data as specified in the form.

  • Page 26: Vigilance System

    Esaote central plants, or one of our subsidiaries, or one of our official distributors immediately through the following form, or through a communication reporting the same data contained in this form.
  • Page 27 I N T R O D U C T I O N POST-MARKET SURVEILLANCE FORM ACCIDENT REPORT FORM To: ESAOTE S.p.A. Quality Assurance Department Via Enrico Melen, 77 16152, Genova, Italy [or associate company] [or authorized distributor] ESAOTE system/device name:................
  • Page 28 I N T R O D U C T I O N MyLab - G E T T I N G S T A R T E D 1 - 12...

  • Page 29: Additional Information On Safety

    Chapter 2. Additional Information on Safety  This chapter provides additional information on safety specifically for MyLab products. Please read the “Safety and Standards” manual carefully for a complete overview of all safety aspects of products. MyLab Environmental Safety Special waste The system contains lithium-ion batteries.

  • Page 30: Electromagnetic Compatibility

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Electromagnetic Compatibility This system was designed for use in the electromagnetic environments declared in the tables below, in compliance with standard IEC 60601-1- 2:2014 (4 edition).

  • Page 31: Essential Performance

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Use of accessories, transducers and cables other than those specified or WARNING provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this...

  • Page 32: Electromagnetic Immunity For All Medical Equipment

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Electromagnetic Immunity for All Medical Equipment MyLab system is intended for use in the electromagnetic environment specified below. The MyLab customer or the user of the system should assure that it is used in such an environment.

  • Page 33: Electromagnetic Immunity For Medical Equipment Not Life Supporting

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y MyLab system is intended for use in the electromagnetic environment specified below. The MyLab customer or the user of the system should assure that it is used in such an environment.

  • Page 34: Recommended Distances Between Radiofrequency (Rf)

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Recommended Distances between Radiofrequency (RF) Communication Systems and MyLab  As stated in the “Safety and Standards” manual, it is recommended not to use radiofrequency (RF) transmission systems near the ultrasound system.

  • Page 35: Wireless Requirements

    A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y Wireless Requirements is equipped with built-in wireless capability. MyLab When wireless is active, the operator should make sure to stay at a minimum distance of 20 cm from the rear of the equipment.
  • Page 36 A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y MyLab - G E T T I N G S T A R T E D 2 - 8...

  • Page 37: System Overview

    Chapter 3. System Overview are professional, innovative and versatile real-time MyLab 9 MyLab 9 eXP high-resolution ultrasound systems. The wide range of probes makes them suitable for many clinical applications. are based on a mainframe easily movable platform. MyLab 9...

  • Page 38: Clinical Applications And Supporting Probes

    CE marked sterile cover for intraoperative neurosurgical application. Clinical Applications and Supporting Probes A variety of ultrasound probes can be connected to MyLab 9 MyLab 9 eXP models: Table 3-1: Available probes and applications Probe Applications...
  • Page 39 S Y S T E M O V E R V I E W Probe Applications Biopsy SB2C41 Abdominal, Gynecology, Musculo-skeletal, Obstetric and Fetal, Pediatric, Urology SB3123 Gynecology, Obstetric and Fetal, Urology SHFCW Vascular SI2C41 Abdominal, Gynecology, Musculo-skeletal, Obstetric and Fetal, Pediatric, Urology ST2612 Cardiac...
  • Page 40 System applications are dependent on your system configuration, NOTE transducer and exam type. Not all applications are approved in all Countries. Please refer to your Esaote local representative for further information. MyLab - G E T T I N G S T A R T E D...

  • Page 41: Patient Population

     Weight: all weight categories (in terms of Body Mass Index)  Height: no limitations Operator profile are designed for operators who are qualified and MyLab 9 MyLab 9 eXP trained in using ultrasound system:  Sonographers  Cardiologist ...

  • Page 42: System Components

    S Y S T E M O V E R V I E W System Components The system consists of a control panel assembly with LCD monitor and a console with the system electronics and connectors, housed in an ergonomic cart designed to be both highly mobile and adjustable for a range of users and operating conditions.
  • Page 43 S Y S T E M O V E R V I E W Table 3-3: System components description Number System Component Monitor On/Off button Control Panel Assembly Orientation and sliding lever Cable hangers Physio connector (black) ECG connector (gray) Connections panels Probe holders Front wheel brake pedal...

  • Page 44: Monitor (1)

    S Y S T E M O V E R V I E W Monitor (1) is equipped with an LCD LED flat-plan display on an articulated MyLab mounting arm. The monitor is adjustable to accommodate different operating positions and operator heights. The monitor can also be locked in position for moving the system.

  • Page 45: Control Panel Assembly (3)

    S Y S T E M O V E R V I E W Control Panel Assembly (3) The Control Panel Assembly includes the main controls: physical buttons, knobs, and trackball, TGC, touchscreen and a pull-out QWERTY keyboard placed in the drawer below the panel. The control module also allows to select transducers, enter patient data, review and annotate images, perform measurements and calculations, and change setups.

  • Page 46: Control Panel Assembly Orientation

    S Y S T E M O V E R V I E W Control Panel Assembly Orientation The Control Panel Assembly is adjustable to accommodate a wide range of operator heights and operating positions. These adjustments can be controlled by two levers located below the Control Panel Assembly (as shown in the image beside).

  • Page 47: Ecg And Physio Connectors

    S Y S T E M O V E R V I E W ECG and Physio Connectors The ECG cable connector (7) and Physio cable connector (6) are placed on the left side of the console. Probe Connectors and Cable Management Four probe connectors (11) are located on the front of the console.

  • Page 48: Connections Panels (8)

    S Y S T E M O V E R V I E W Connections panels (8) On the rear left side of the console two doors protect additional connections panels. The one on the lateral side on the system allows to access the PC ports like auxiliary USB 3.0 ports and the headphone connector.

  • Page 49: Preparing The System

    Chapter 4. Preparing the System The system will be installed by Esaote personnel. Esaote personnel will be responsible for opening the packaging and ensuring that the system is correctly programmed and operational. The information and procedure provided in this chapter will guide to prepare the system for use.

  • Page 50: Connecting Peripherals

    MyLab usually already mounted and connected. The first mounting and connecting will usually be performed by an Esaote technician. Esaote suggests to contact its Service representative to install any auxiliary NOTE device. Before installing the peripheral devices, make sure that the system is switched off and unplug the power cable from the mains outlet.

  • Page 51: Medical Environments

    P R E P A R I N G T H E S Y S T E M Furthermore, all configurations shall comply with the requirements for medical electrical systems (see IEC 60601-1-1 or clause 16 of the 3rd Edition of IEC 60601-1, respectively).
  • Page 52 B or area C connected by cable (USB, HDMI,...) - Auxiliary device must be powered through a safety insulation transformer complying to IEC 60601. Auxiliary Devices must be approved by Esaote. Auxiliary Devices must also NOTE comply with EN 60601-1-2 safety standard and subsequent amendments or the electromagnetic compatibility.
  • Page 53 The system must be powered so to satisfy the electrical safety requirements, WARNING as specified in the “Safety and Standards” manual. Esaote recommends running a current leakage (patient and environment) test when installing in order to check whether the applicable limits of standard EN60601-1 are not being surpassed.

  • Page 54: B/W Thermal Medical Usb Printer Housing

    P R E P A R I N G T H E S Y S T E M B/W Thermal Medical USB Printer housing Those kinds of printers can be hosted in the lateral storage area. Procedure 1. Open the rear door. 2.

  • Page 55: Auxiliary Monitor

    P R E P A R I N G T H E S Y S T E M 8. Switch the printer on. Always power any USB device (such as USB printers or external USB WARNING archiving devices) through the trolley. Now the system can be connected to the mains and the entire configuration can be powered through the main switch.

  • Page 56: External Cd/Dvd And Hdd Drives

    Mechanical damage may MyLab occur if the drive falls down. The External Slim DVD Writer kit supplied by Esaote includes a Velcro tape to easily and securely fix it to console. Stick the tape both on the MyLab...
  • Page 57 P R E P A R I N G T H E S Y S T E M 10. Lock the monitor arm by rotating the lever on the monitor arm on lock position. 11. Release the wheel brakes and set the steering locks for comfortable moving.
  • Page 58 P R E P A R I N G T H E S Y S T E M Fig. 4-4: Transporting Configuration  Protect the screen orientable arm so that no lateral movements are possible (for example with film).  Use the brakes to lock the system.

  • Page 59: Using The System

    Chapter 5. Using the System This chapter provides a brief description of the system controls.  Refer to the “Advanced Operations” manual for further detailed information. Connecting the system to the mains The power plug and the electrical main switch are located on the rear-bottom of the system.

  • Page 60: System Controls

    U S I N G T H E S Y S T E M 6. Connect the network and other cables from the system to the appropriate wall plugs. 7. Plug the cable to a reliable grounding power outlet to assure adequate grounding.
  • Page 61 U S I N G T H E S Y S T E M Table 5-1: Exam Control Buttons Button Description Toggles between factory and customized touchscreen that can be ETO UCH created by the user. Refer to the chapter “Customizing the system” further in this manual.

  • Page 62: Tgc Sliding

    U S I N G T H E S Y S T E M Button Description Activates Generic Measurements showing the list of available +. . . + measurements on the right of the image. Changes the function linked to the trackball. Refer to the ACTI O N “Trackball”...

  • Page 63: Trackball

    U S I N G T H E S Y S T E M Trackball The trackball operates in two different modes. Standard Mode In its standard mode, the trackball makes it possible to quickly position the cursors on the screen. Each mode automatically activates the trackball on its cursor.

  • Page 64: Touchscreen Section

    U S I N G T H E S Y S T E M Touchscreen Section This section includes the and the buttons, a touchscreen and M EN U O N /O FF two USB ports. Menu Button displays the system menu for all configurations/settings (both clinical M EN U and system settings).
  • Page 65 U S I N G T H E S Y S T E M Table 5-3: Touchscreen key status Active Key with Disabled Key Active Key Selected Key Sub-menu Gray text on dark White text on light As Active Key with Blue text on dark gray background gray background...
  • Page 66 U S I N G T H E S Y S T E M Multipurpose Panel This layout is used for advanced exam functions, for example bodymarks or Layout annotations. The touchscreen is organized in six main areas. Fig. 5-1: CFM touchscreen 1.

  • Page 67: Alphanumeric Keyboard Section

    U S I N G T H E S Y S T E M bottom right button to switch between real-time and review. Swipe up to close. The touchscreen cannot be used for diagnosis. WARNING Alphanumeric Keyboard Section The alphanumeric keyboard is based on the QWERTY standard. The alphanumeric keys are used to enter text data in the enabled windows.

  • Page 68: Heading Area

    U S I N G T H E S Y S T E M 5. Thumbnails Area Controls on the Screen Layout are indicated in the operator manuals with , while strings and fields are indicated B O L D B L A C K C A P I T A L L E T T E R S with NORMAL BLACK CAPITAL LETTERS Symbol on Screen...

  • Page 69: Wi-Fi

    U S I N G T H E S Y S T E M Wi-Fi When Wi-Fi is enabled, its icon is shown beside the archival media icons. The icon is shown crossed out whenever Wi-Fi is not connected.  For more details on Wi-Fi connectivity, consult the relevant section on the “Advanced Operations”...

  • Page 70: Image Area

    U S I N G T H E S Y S T E M Image Area The visualization of the image depends on various factors such as the active mode, the selected application and the probe. The following figure shows the elements in the image area that are independent of these factors.

  • Page 71: Machine Parameters

    U S I N G T H E S Y S T E M Machine Parameters Table 5-5: Imaging Parameters Displayed Parameter Description format Imaging or TEI (Tissue Enhancement Imaging) mode: General, Resolution or Penetration (L: Low, H: High) Imaging gain (Min,%, Max) Auto Adjust nn mm Depth...

  • Page 72: Joystick Area

    U S I N G T H E S Y S T E M Table 5-7: Doppler Parameters Displayed Parameter Description format nnn MHz Doppler frequency or TV (Tissue Velocity) frequency when enabled Doppler gain (Min,%, Max) nnn kHz Pulse Repetition Frequency Dynamic range / Rejection nnn Hz Wall filter...

  • Page 73: Customizing The System

    Chapter 6. Customizing the System can be customized to increase efficiency and streamline your work- MyLab flow. You can do the following:  Create preset designed specifically for the exams you perform.  Change system settings to reflect your needs. ...
  • Page 74 C U S T O M I Z I N G T H E S Y S T E M The menu is organized in three areas:  Clinical Configuration, the upper area shows all options relating to Clinical Settings or Presets, ...
  • Page 75 C U S T O M I Z I N G T H E S Y S T E M System Settings System Settings define the ’s parameters related to a specific system MyLab profile:  Profile Manager,  DICOM configuration, ...

  • Page 76: Generic Configuration Procedure

    C U S T O M I Z I N G T H E S Y S T E M Generic Configuration Procedure Once accessed the configuration screen for the parameter you want to set, a common set of commands is available and a common setting procedure can be used.

  • Page 77: Clinical Configurations

    C U S T O M I Z I N G T H E S Y S T E M Clinical Configurations  This chapter explains how to set many options. For configurations not MyLab described here refer to relevant chapters in the “Advanced Operations” manual. Real Time Preset A Preset is a group of settings that optimizes the system for a specific type of exam.

  • Page 78: Creating A New Preset From Real-Time

    C U S T O M I Z I N G T H E S Y S T E M Creating a new preset from Real-Time Procedure To create a new preset or modify an existing one:  Adjust the real time image as desired in all modes (2D, CFM and Doppler).
  • Page 79 C U S T O M I Z I N G T H E S Y S T E M  on the right the menu to record the macro and to edit the customized buttons,  on the bottom the fields where customized touchscreens are named and described.

  • Page 80: System Settings

    C U S T O M I Z I N G T H E S Y S T E M button adds a new tab that will be automatically displayed. Place N E W T A B the cursor on the tab and press to change its name, using the EN TER alphanumeric keyboard to edit it.

  • Page 81: Corrupted System Profile

    (no component has to be without any setting). Should this not solve the problem, contact Esaote personnel. Center ID Center ID allows to set the center name displayed in the Heading Area of the screen and the center information shown in the report.

  • Page 82: General Setup

    C U S T O M I Z I N G T H E S Y S T E M General Setup The menu is organized in internal folders, selectable using the tabs displayed on the top of the menu. Fig.

  • Page 83: Measure Units Folder

    C U S T O M I Z I N G T H E S Y S T E M Set Time Using the keyboard set the time. Time Format The time format is available on a 24 or 12 hour basis. In the 12 hour option, the time is shown as AM and PM.

  • Page 84: Control Panel Folder

    C U S T O M I Z I N G T H E S Y S T E M CONTROL PANEL Folder The table below lists and explains the available fields and the corresponding actions. Table 6-3: Control Panel Folder Fields Action TRACKBALL SPEED...

  • Page 85: Field Shutdown Type

    C U S T O M I Z I N G T H E S Y S T E M Fields Action DIRECT PROBE When checked, it allows to show on the SELECTION touchscreen work flow area icons of connected probes for quick change.

  • Page 86: Field Available Qwerties

    If a virus is found, it is advisable to switch off the , disconnect it from MyLab the data network and call the Esaote service, which will check for the presence of a virus and restore the system. Field AVAILABLE QWERTIES...
  • Page 87 C U S T O M I Z I N G T H E S Y S T E M Table 6-5: Application Preset Folder Fields Action ABSOLUTE ANGLE The angle correction factor of linear probes can be correlated either to the line cursor or to the line perpendicular to the transducer surface (absolute angle).

  • Page 88: Footswitch Folder

    C U S T O M I Z I N G T H E S Y S T E M FOOTSWITCH Folder This option is used to set which function is associated to each pedal (left, middle and right) of the footswitch. Select from the curtain menu the function then press S A V E PROBE BUTTONS Folder...

  • Page 89: License Activation

    C U S T O M I Z I N G T H E S Y S T E M Press then to enter the License Manager Menu. It is L I C E N S E S M EN U organized in internal folders, selectable using the tabs displayed on the top of the menu.

  • Page 90: Import/Export Menu

    C U S T O M I Z I N G T H E S Y S T E M Import/Export Menu The menu is organized with internal folders, selectable using the tabs displayed on the top of the menu. Fig.

  • Page 91: Import Folder

    C U S T O M I Z I N G T H E S Y S T E M  customized SAVING OPTIONS  customized center configuration ( CENTER ID  customized export settings; MULTIMEDIA  customized configurations; NETWORK ...

  • Page 92: System Info

    ENCRYPTION MODE Encryption Mode Encryption allows to preserve health data storage confidentiality. Encryption can be performed by Esaote Service personnel only. Encryption can be applied to the internal hard disk and to one or more external USB memory devices. At the end of encryption a recovery key will be given to you. The recovery key is stored on USB pen drive, or on file, or by printing it.

  • Page 93: Performing An Exam

    Chapter 7. Performing an Exam This chapter describes the procedures commonly used in performing patient exams with . These procedures include entering patient and application MyLab data, acquiring images, making measurements and calculations; annotating and reviewing images.  Read the “Safety and Standards” manual carefully: all the safety characteristics, cautions and warnings listed there apply to all exams.
  • Page 94 P E R F O R M I N G A N E X A M Fig. 7-1: Patient ID screen Fig. 7-2: Probe, Application, Preset touchscreen Starting exam The steps to be followed to start an exam are: procedure 1.

  • Page 95: Entering Patient And Application Data

    P E R F O R M I N G A N E X A M Entering Patient and Application data There are two ways to enter patient data:  Filling the Patient ID screen,  Retrieving existing data from archive. Filling the Patient ID screen The Patient ID screen is used to enter patient data and application data, when applicable.

  • Page 96: Selecting Probe

    P E R F O R M I N G A N E X A M At any time during the exam, Patient Data can be viewed and modified by PATIENT ID pressing PATIENT ID Do not use to start a new exam of a new patient as it will update WARNING existing patient’s data with new entries.

  • Page 97: Selecting Application

    P E R F O R M I N G A N E X A M PROBE At any time during the exam, a different probe can be selected tapping or the new probe key on the touchscreen work flow area (available when is enabled).

  • Page 98: Smart Preset

    P E R F O R M I N G A N E X A M Smart Preset After exam starts, at the right side of the touchscreen, presets for the active probe and application are shown. When the preset is changed during the exam tapping one of them on the touchscreen, all acquisition parameters are reset while the geometrical characteristics (such as depth, size) are maintained.

  • Page 99: Freeze And Scrolling Memories

    P E R F O R M I N G A N E X A M Freeze and Scrolling Memories to stop and start real-time image acquisition and update. FREEZE pressure the system displays the scroll bar of the memories, FREEZE assigning the trackball to manual cineloop review (frame-by-frame).

  • Page 100: Monitor Adjustments

    P E R F O R M I N G A N E X A M Before archival, Patient Data can be made anonymous by checking the box. ANONYMIZE The native format of the exam can not be made anonymous. NOTE The exam can be simultaneously exported to the local archive and to external media (in native, DICOM and multimedia formats).

  • Page 101: System Maintenance

    Chapter 8. System Maintenance To ensure that operates over time at its maximum efficiency, Esaote MyLab recommends to perform maintenance procedures regularly. Maintenance procedures should be performed both by the user itself and by Esaote authorized service personnel. The maintenance operations and schedule are provided in the table below.
  • Page 102 Periodic maintenance operations that require the access to the system can NOTE be performed only by trained personnel: contact your local Esaote representative for further information on required periodic inspections. Only trained persons are allowed to perform the safety inspection mentioned above.

  • Page 103: Cleaning Operations

    S Y S T E M M A I N T E N A N C E Cleaning Operations Periodic cleaning of the system and any connected devices is important. In the event of poor maintenance, dust and dirt can compromise the reliability and performance of and connected devices.

  • Page 104: Cleaning Control Panel And System

    S Y S T E M M A I N T E N A N C E Check the instructions supplied by the manufacturer of the cleaning agents for possible stricter limitation. Do not use hot cleaning agents for cleaning the equipment.

  • Page 105: Cleaning Probe And Gel Holders

    S Y S T E M M A I N T E N A N C E Invisible laser radiation. Do not view directly with optical instruments. WARNING Class 1M laser products. Do not remove the ball from the socket. Do not try to disassemble the trackball during the cleaning of the WARNING removable sealing ring.

  • Page 106: Cleaning The Lcd Case

    S Y S T E M M A I N T E N A N C E Never spray or pour any liquid directly onto the screen or case. Overspray or liquid may cause electrical shock. WARNING Cleaning the LCD case Use a soft, dry cloth to wipe the surface of the case.

  • Page 107: Technical Specifications

    Licenses enable specific functions of the system, they are linked to the system serial number and are, therefore, unique. They should be carefully stored. The system is delivered by Esaote, with the licenses already installed. Additional features can be added buying the related license.
  • Page 108 T E C H N I C A L S P E C I F I C A T I O N S Applications systems can be equipped with the following application licenses. MyLab Table 9-1: Applications licenses Licence Application Features Cardiology Cardiac (adult and pediatric)
  • Page 109 T E C H N I C A L S P E C I F I C A T I O N S Feature Description Breast Suite It enables features for breast navigation, breast MRI navigation and breast biopsy. Compass M-Mode allows to correct M-Mode line position to optimize tracing acquisition, even when the position of the heart is not perpendicular to the ultrasound beam.
  • Page 110 T E C H N I C A L S P E C I F I C A T I O N S Feature Description MyLibrary Dedicated libraries for Rheumatology, MSK, Regional anesthesia, Physiotherapy and Advanced vascular. Live Preview features allow to scan in real-time while using anatomical references and scanning guidance.
  • Page 111 XView+ pixel level, eliminating speckle and noise artefacts. a. Refer to www.esaote.com for further details on supported DICOM classes. b. Refer to the corresponding Sales Area manager for further information. Features, probes and applications availability is dependent on your system NOTE configuration.

  • Page 112: Technical Characteristics

    Complies with IHE integration profiles 1. Auxiliary monitors connected to this input have not to be used for diagnostic purposes. 2. Refer to www.esaote.com for further details. MyLab - G E T T I N G S T A R T E D...

  • Page 113: Image Files

    T E C H N I C A L S P E C I F I C A T I O N S Image Files  Formats • BMP (uncompressed) • PNG (lossless) • JPEG (lossy) • AVI: Codec Microsoft MPEG-4 V2 and MS-Video 1 •...

  • Page 114: Ip Grade

    T E C H N I C A L S P E C I F I C A T I O N S IP Grade  IP (X)0, this means models are not watertight. MyLab Power supply  Voltage operative range: 100 ...

  • Page 115: Operating Requirements

    T E C H N I C A L S P E C I F I C A T I O N S Connector Plug Type Cord Type Length (MyLab side) (Mains side) EN60320/C19 HG (Hospital grade) SJT3X14AWG North America NEMA 5-15 Section 14AWG Latam...

  • Page 116: European And International Standards

    T E C H N I C A L S P E C I F I C A T I O N S European and international standards Table 9-4: Standards Reference and title of the standard (and reference document) EN 60601-1:2006 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance EN 60601-1:2006/AC:2010...

  • Page 117: Opti-Light

    T E C H N I C A L S P E C I F I C A T I O N S Reference and title of the standard (and reference document) EN 62366:2008 Medical devices - Application of usability engineering to Medical Devices IEC 62366:2015 EN ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk...
  • Page 118 T E C H N I C A L S P E C I F I C A T I O N S MyLab - G E T T I N G S T A R T E D 9 - 12...

This manual is also suitable for:

Mylab 9 exp

Table of Contents

Save PDF