Table of Contents
Advertisement
Startup image settings
Sets the image displayed on the screen when the power
is turned on.
Conditions of the image that can be set in [Read
user image]
Image size: 1920 x 1080 only
•
jpg files / bmp files (except for the ones that cannot
•
be played back with [USB media player] (see
page 99))
File and folder names are displayed on the file list with
conditions as below.
‒ I f a file or folder is placed directly under the root
directory of the USB device.
Up to 246 characters of file name (including the
•
extension) are properly displayed.
Note that the file list may disappear due to the
display time of the on-screen menu before the
entire display of file names completely appears.
Up to 244 characters of folder name are properly
•
displayed.
If the folder is placed hierarchically, the number of
*
characters displayed decreases by the number of
characters for the file path (folder information).
‒ O nly the files with file names described with ASCII
characters excluding control code are displayed.
Note
●
[Picture] cannot be adjusted when setting the startup
image.
●
Image displayed for the startup image may slightly
differ from image confirmed on the computer.
[Startup image settings] - submenu screen
Startup image settings
Display setting
Image select
Read user image
Clear user image
[Display setting]
Sets the image display when the power is turned on.
[Off]:
The function does not operate.
[On]:
Enables the function.
[Image select]
Select the image to display.
[Default image]:
Panasonic logo (blue background)
[User image]:
Image registered by the user
On
User image
Note
●
Only when [Default image] is displayed, the logo
automatically rotates when displayed, according
to the [Display orientation] (see page 74) setting
([Landscape] / [Portrait]).
●
When [User image] is selected, the image does not
rotate according to the [Display orientation] setting.
Prepare an image of 1920 x 1080 aspect ratio
compatible with the installation direction.
[Read user image]
Register the image read from a USB memory device.
[Read user image] - submenu screen
Read user image
Select a startup image.
usb/picture/
..
0_folder_sample
g_sample
z_sample
1sample.jpg
2sample.jpg
3sample.jpg
a_sample.jpg
j_sample.jpg
v_sample.jpg
Note
●
Set the input to something other than USB, and
read the image.
●
Only one user image can be registered.
●
Do not turn the power off while reading the user
image.
●
The selected image is previewed on the [Read user
image] submenu screen.
●
While the [Read user image] submenu screen is
being displayed, the [USB media player] stops
playback.
●
When USB memory device is not connected to the
USB terminal, [Read user image] is greyed out and
cannot be selected.
●
If starting to read the image while creating the
preview image, an access error will occur, and the
image may not be recognized as a image file.
Confirm the preview image display, and then start
reading process.
●
The displayed file names are restricted as follows.
Applicable extension: jpg, jpe, jpeg or bmp
•
The file name is not ".jpg", ".jpe", ".jpeg", or
•
".bmp" which start with dot (.).
●
Depending on the OS setting, folders or files in the
USB memory invisible on your computer may be
displayed on this unit.
73
English
Advertisement
Table of Contents
