Remote Driver's Unlock Control - Pontiac 2002 Grand Prix Owner's Manual

4. Press UNLOCK again to change the current mode.
5. Repeat Step 4 until you hear the number of chimes
that matches the mode you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
earlier in this section or program the next feature
available on your vehicle.

Remote Driver's Unlock Control

(If Equipped)
With the remote driver's unlock control feature, you can
program your vehicle to do the following:
D
When you press UNLOCK on your remote keyless
entry transmitter, the driver's door will unlock, and
D
when you press UNLOCK on your remote keyless
entry transmitter again within five seconds, all doors
will unlock.
Programmable Modes
Mode 1: Remote All Doors Unlock – When you press
UNLOCK on the remote keyless entry transmitter once,
all doors will unlock.
Mode 2: Remote Driver's Door and All Doors
Unlock – When you press UNLOCK on the remote
keyless entry transmitter once, the driver's door will
unlock. If you press UNLOCK again within five seconds,
all doors will unlock.
Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which your
vehicle was programmed may have been changed since
it left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press UNLOCK on the remote keyless
entry transmitter.
3. Count the number of chimes you hear. The number
of chimes tells you which mode the vehicle is set for.
If you do not wish to change the current mode, you
can either exit the programming mode by following
the instructions earlier in this section or program the
next feature available on your vehicle.
4. Press UNLOCK on the remote keyless entry
transmitter again to change the current mode.
5. Repeat Step 4 until you hear the number of chimes
that matches the mode you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
earlier in this section or program the next feature
available on your vehicle.
2-19