Entering Programming Mode - Pontiac 2001 Aztek Owner's Manual

Vehicle Customization
Some of your vehicle's features can be reset or customized
according to your preference. The features you can program
depend on the options that came with your vehicle.
If your vehicle is equipped with the DIC, see "Driver
Information Center" in the Index to customize
your features.
The following features can be customized according
to the options that your vehicle has, if you do not have
the DIC.

Entering Programming Mode

To program features, your vehicle must be in the
programming mode. Follow these steps:
1. Turn the ignition key to ON. The gear selector
must be in PARK (P).
2. Press and hold the trip/reset button, located next
to the odometer, while the odometer is in odometer
mode, for two seconds.
2-14
United States
3. This message will appear in the message center, located
in the instrument panel cluster, as an indication that your
vehicle is ready to begin programming.
If you have the optional remote keyless entry system,
you must press the LOCK button. This lets the
system know which transmitter is being personalized.
Each remote keyless entry transmitter can be
personalized differently.
You can now program your choices.
To exit the programming mode, follow the steps listed
under "Exiting Programming Mode" later in this section.
Canada