Pontiac 1998 Grand Am Owner's Manual page 145

If E and a number appear on the radio display, the tape
won't play because of an error.
ElO:
The tape is tight and the player can't turn the
tape hubs. Remove the tape.
Hold the tape
w i t h
the
open end down and try to
turn
the right hub to the left
with a pencil. Turn the
tape over and repeat. If the
hubs do not turn
easily, your tape may be
damaged and
should not be used in the player. Try a new tape to
make sure your player is working properly.
Ell:
The tape is broken. T r y a new tape.
If any error occurs repeatedly or if an error can't be
corrected, please contact your dealer. If your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.
PREV (1): Press this button or the SEEK down arrow to
search for the previous selection on the tape. Your tape
must have at least three seconds of silence between each
selection for PREV or SEEK to work. The tape direction
arrow blinks during PREV or SEEK operation. Press
PREV or the SEEK down m o w
to
stop searching. The
sound will mute during PREV or SEEK operation.
NEXT (2): Press this button or the SEEK up arrow
to
search for the next selection on the tape. If you hold the
button, the player will continue moving forward through
the
tape.
Your tape must have at least three seconds of
silence between each selection for
NEXT
or
SEEK
to
work. The tape direction arrow blinks during NEXT or
SEEK operation. Press NEXT or the SEEK up arrow to
stop searching. The sound will mute during
NEXT or
SEEK operation.
PROG (3): Press this button to play the other side
of the tape.
00
(4): Press
this
button
to reduce background noise.
Note that the double-D symbol will appear on the
display.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
REV
(5): Press this button
to
reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while
the
tape reverses.
You may select stations during REV operation by using
SEEK or TUNE.
3-14