Keyboard - Dell XPS M1730 Owner's Manual

Insert a scribe into the indent to lift the hinge cover on the right side.
b
Ease the hinge cover up, moving from right to left, and remove it.
c
When replacing the hinge cover, first insert the left edge and then press from
left to right until the cover snaps into place.

Keyboard

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To avoid damaging the system board, you must remove the battery before
you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 123.
2 Open the display and remove the hinge cover. See "Hinge Cover" on
page 136.
3 Remove the keyboard:
hinge cover
1
Adding and Replacing Parts
1
137