Lexmark MX717 User Manual page 242

Maintaining the printer
Item United
States and
Canada
Extra high yield 63B1X00
toner
cartridge*
* This supply item is supported only in MX718 printer model.
For more information on countries located in each region, go to www.lexmark.com/regions.
MX717 and MX718 Regular cartridges
Item
Worldwide
High yield toner cartridge
Extra high yield toner cartridge
1
This supply item is supported only in MX717 printer model.
2
This supply item is supported only in MX718 printer model.
For more information on countries located in each region, go to www.lexmark.com/regions.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to
exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Imaging unit
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be
seen on the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of
the fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit
and can be individually ordered and replaced if necessary.
European Rest of Europe,
Economic Middle East,
Area (EEA+) and Africa
(RoEMEA)
63B2X00 63B5X00
Lexmark Return Program
520Z
Latin America Rest of Asia
Distribution Pacific (RoAP)
(LAD)
63B4X00 63B3X00
Regular cartridge
1
53B0HA0
2
53B0XA0
Regular
520ZA
242
Australia and
New Zealand
(ANZ)
63B6X00