Removing The Split Bench Seat - Oldsmobile 2004 Silhouette Owner's Manual

Removing the Split Bench Seat

Make sure the seatback is in the upright position.
1. Lift the seatback recliner lever or pull the nylon strap
on the back of the seat to fold the seatback forward.
2. From behind the bench seat, pull the nylon strap
at the center of the base of the seat to release the
rear latches from the floor pins.
Do not let go of the strap until the seat is folded
all the way forward.
1-10
3. To unlatch the front latches, squeeze the angled
bar toward the straight crossbar.
4. Remove the seat by rocking it slightly forward,
then toward the rear of the vehicle and then
pulling it out.
Repeat these steps for the other section of the split
bench seat.