Rear Seats; Rear Seat Operation; Flip And Fold Feature - Oldsmobile 2004 Silhouette Owner's Manual

Rear Seats

Rear Seat Operation

The rear seats in your vehicle have levers and straps
used to adjust, remove, and reinstall the seats. By using
the levers and straps in the correct order, you can
easily remove the seats from the vehicle.
When you put the seats back in the vehicle, follow the
label on the back of the seat for proper location.

Flip and Fold Feature

The rear seats in your vehicle can be folded forward.
Use this feature for exiting and entering third row seats.
1. If the seats have the adjustable head restraints,
push them fully down.
1-8
2. Fold the seatback flat
on the seat, by either
pulling on the nylon
strap on the rear of the
seat or lifting up on
the lever located on the
front of the seatback.
If the seat adjusts, slide
it all the way back.
To return the seat(s) to the normal position, do the
following:
1. Push the seat back and firmly push the rear hooks
onto the rear floor pins by pushing down on the
rear of the seat.
2. Try to raise the seat to check that it is locked down.
3. Lift the seatback recliner lever or pull the nylon
strap on the back of the seat and raise the
seatback until it locks upright.
4. Push and pull on the seatback to check that it is
locked.
3. Release the rear set
of hooks from the floor
pins by pulling the
nylon strap located
at the base of the
seat; hang on to the
strap as the seat folds
forward.