Oldsmobile 2000 Silhouette Owner's Manual page 233

Table of Contents

Advertisement

Adjusting the Speakers
BALANCE: Press and release the P
LIST/AUDIO knob until BAL appears on the display.
Turn the knob clockwise to move the sound to the right
speakers and counterclockwise to move the sound to the
left speakers. The middle position balances the sound
between the speakers. The display will show the speaker
balance. To set the balance to the middle position,
select the control and press and hold the P
LIST/AUDIO button. The radio will produce one beep
and set the display level to the middle position. To set all
tone and speaker controls to the middle position, press
-
and hold the P
TYPE LIST/AUDIO knob when no tone
or speaker control is active. The radio will produce one
beep and display ALL with the level display in the
middle position.
3-26
FADE: Press and release the P
knob until FADE appears on the display. Turn the knob
-
TYPE
clockwise to move the sound to the front speakers and
counterclockwise to move the sound to the rear
speakers. The middle position balances the sound
between the speakers. The display will show the speaker
balance. To set the fade to the middle position, select the
control and press and hold the P
button. The radio will produce one beep and set the
-
TYPE
display level to the middle position. To set all tone and
speaker controls to the middle position, press and hold
the P
speaker control is active. The radio will produce one
beep and display ALL with the level display in the
middle position.
Using RDS Mode
Your audio system is equipped with a Radio Data
System (RDS). RDS mode gives you many useful new
features. With RDS, the radio can:
D
D
D
D
-
TYPE LIST/AUDIO knob when no tone or
Seek only to stations with the types of programs you
want to listen to,
seek to stations with traffic announcements,
receive announcements concerning local and
national emergencies, and
receive and display messages from radio stations.
-
TYPE LIST/AUDIO
-
TYPE LIST/AUDIO

Advertisement

Table of Contents
loading

Table of Contents