Woodway 4Front Programming Procedure

Tv programming procedure

Hide thumbs Also See for 4Front:

4Front TV Programming Procedure

To access the LCD programming options begin by turning on the TV. With the TV on, be sure that the TV input is

selected. If not, press the "INPUT" key until you see the input selection box. Use "CH+" or "CH-" to navigate up

and down and select the TV input. Pressing the "ENTER" key will confirm the selection.

With the TV in the correct input mode, press and hold the "ENTER" key for 3 to 5 seconds. Release the "ENTER"

key and press the "BACK" button. This should pop open the TV menu screen. Release the button when the

menu appears.

Table of Contents

Do you have a question about the 4Front and is the answer not in the manual?

Page 1 4Front TV Programming Procedure To access the LCD programming options begin by turning on the TV. With the TV on, be sure that the TV input is selected. If not, press the “INPUT” key until you see the input selection box. Use “CH+” or “CH-“ to navigate up and down and select the TV input.
Page 2 In this menu use the “VOL+” and “VOL-“ buttons to move across the different menu icons on the top of the screen, and the “CH+” and “CH-“ buttons to scroll down into the different menu items. Press the “BACK” button to return up one menu level.
Page 3 With the correct option chosen press the “CH –“ button once to highlight “Auto Scan”. Press “ENTER” or “VOL +” to begin the scan. The TV will pop up a box asking if you are sure you wish to continue. Press the “VOL –“ key to accept the warning and begin the scan.
Page 4 The TV will then begin to scan the channels and display the current status and the overall progress. Once finished the TV will tune to the first available channel it found.