Advertisement
The Razer Naga Epic requires a USB connection that is able to supply sufficient power during battery
charging process. The battery charging process of the Razer Naga Epic may be affected if connected to a
non-powered USB hub or non-powered USB ports found on certain keyboards and other peripherals
When in doubt, it is preferable to connect the Razer Naga Epic directly to the USB port found on the CPU
unit of your computer system.
* For optimum battery life, always move the switch to the Wired/Charging position when not using your
Razer Naga Epic in wireless mode.
Setting Sensitivity Stages
A sensitivity stage is a preset sensitivity value you can swap to on-the-fly. This means you can change to
your preferred sensitivity instantly by toggling between sensitivity stages.
To preset a sensitivity stage:
1. Load the Razer Configurator.
2. Click on the Tweak Performance tab.
3. Click on the SENSITIVITY STAGE button. A Sensitivity Stage Settings pop up box will appear.
4. Select the number of sensitivity stages needed.
5. Click on the stage you would like to preset and adjust using the arrow on the slider below.
6. Click APPLY when done. To switch between different sensitivity stages, simply assign the Sensitivity
Stage Up and Sensitivity Stage Down functions to the desired buttons.
Advertisement
