E-peas AEM10941 Quick Start Manual
Evk
Hide thumbs
Also See for AEM10941:
- User manual (12 pages) ,
- Quick start manual (3 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
Quick Links
AEM10941
Quick Start Guide EVK
FEATURES
Connectors
• 1 screw connector + 1 connector FFC/FPC for the Photovoltaic Cell
• 1 screw connector + 1 JST connector for the Storage Element
• 1 screw connector for Primary Battery
• 1 screw connector for HVOUT LDO output (80mA @ 1.8 – 4.2 V)
• 1 screw connector for LVOUT LDO output (20mA @ 1.2 or 1.8 V)
Configuration
• 2 jumpers SELMMP[x] to define the MPPT ratio linked to the harvester technology
• 3 Jumpers CFG[x] to define the storage element protection levels
• 6 resistors footprint related to the custom mode (CFG[2:0]=000)
• 2 jumpers to enable/disable the internal LDOs
• 2 jumpers to define the primary battery minimum level
• 1 jumper to set the dual cell supercapacitor BAL feature
• 1 jumper to set the FB_Cold level (higher coldstart voltage)
Size
• 79mm x 49mm
• 4 x M2.5 Mounting holes
SUPPORT PCB
BOM around the AEM10941
Footprint & Symbol:
Available on the
web product page
www.e-peas.com
© 2020 e-peas S.A.
V2.2
Advertisement
Table of Contents
Related Manuals for E-peas AEM10941
Summary of Contents for E-peas AEM10941
- Page 1 • 1 jumper to set the FB_Cold level (higher coldstart voltage) Size • 79mm x 49mm • 4 x M2.5 Mounting holes SUPPORT PCB BOM around the AEM10941 Footprint & Symbol: Available on the web product page www.e-peas.com © 2020 e-peas S.A.
- Page 2 STEP 1: AEM10941 Configuration • MPPT ratio: SELMPP[0] – SELMPP[1] • Storage Element voltages protection: CFG[2] – CFG[1] – CFG[0] • BAL option: Select “ToCn” for dual-cells supercapcacitor and “GND” for any other storage • PRIM option: Connect both jumpers “NoPRIM” or remove them if a primary battery is connected.
Need help?
Do you have a question about the AEM10941 and is the answer not in the manual?
Questions and answers