Installation; Hoisting - Uludag G-250 Manual For Introduction, Operation And Maintenance

NO
1 FOOT
2 TURNING TABLE
3 RIGHT GUARD
LEFT GUARD
4
(TILTING/VERTICAL)
5 T-FLANGE
6 BEARING FORK
ELEC. MOTOR
7
CONNECTION PART
8 UPPER TABLE
9 UPPER SET SQUARE
SWIVEL-HEAD CLAMP
10
BEARING
11 CLAMP HANDLE
12 TIGHTENING JAW
13 FIXING JAW
14 SIDE EXTENSION CLAMP
15 GRIP
16 GRADE-LOCK PIN
17 GRADE-LOCK BEARING
18 GRADE PIN
19 M12 STUD
20 SPRING BEARING SHAFT
21 BEARING PLATE
22 Ø20 BEARING SHAFT
23 LOCKING HANDLE

3. INSTALLATION

All of our machines are throughly tested in the factory and delivered after ensuring all final
checks. Besides that, all of the standard and optional accessories specified on the
enclosed documents must be checked whether they are existing or not.

3.1. Hoisting

Because of the machine is relatively small and light, it could be readily lifted up and
transported either at least by two people who are holding it at sides in a well-balanced
way or by a standard handling truck. Always pay attention to the warning remarks on the
package for transport and storing of the machine. While transporting with trucks or the
like vehicles, make sure that the package is completely secured against discharge.
PART NAME NO
24 LOCK THIN PLATE
25 SIDE LOCK PIN
26 LOCK SUPPORT
Ø16 UPPER TABLE BEARING
27
SHAFT
28 Ø10 STOP ROD
29 Ø20 CLAMP BUSHING
30 M12 CLAMP SCREW
31 CAST FLANGE
32 30-32 SAW BLADE HOLDER
33 M8 STEPPED WASHER
34 OUTER NUT WASHER
35 BEARING 6007 Z
36 BEARING 51110
37 BEARING 51105
38 ELECTRIC MOTOR
39 RUBBER
40 UPPER BLADE GUARD
41 PLASTIC HANDLE
42 SWITCH
43 M6-35 LOCKING HANDLE
44 M8 BAKALITE GRIP
45 M6-30 BAKALITE SCREW
46 M6-15 BAKALITE SCREW
PART NAME NO
47 M6-25 BAKALITE SCREW
48 M6-15 BAKALITE GRIP
49 Ø9 SHAFT RETAINER
M6-20 PHILLIPS –ROUND HEAD
50
SCREW
51 M8–25 HEX.-SOCKET SCREW
52 M6-25 CAP SCREW
53 M8–35 HEX.-SOCKET SCREW
54 M12–35 HEX.-SOCKET SCREW
55 M8–20 HEX.-SOCKET SCREW
M6-30 PHILLIPS –ROUND HEAD
56
SCREW
57 M6-35 SETSCREW
58 M6-40 SETSCREW
59 M12-15 SETSCREW
60 M6 NUT
61 M16-1.5 NUT
62 Ø6 WASHER
63 M12 WASHER
64 M8 WASHER
20
PART NAME