Britax B-SAFE GEN2 User Manual page 15

5. Feed excess webbing
back into base and
ensure that lower
connector straps are
flush with the base.
Base Installation with Lower Anchors
ü Lower connector strap is tight, not twisted, and that
the base is secure.
ü The base is secure when it moves less than 1 inch (2.5
cm) front-to-back or side-to-side at the vehicle belt
path.
ü Recline angle is correct and confirm that the entire red
marker is completely visible between the two lines on
the recline angle indicators.
B-SAFE GEN2 User Guide
CHECKLIST
Table of Contents
13