Kia Optima Hybrid 2017 Owner's Manual page 98

Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be se‐
cured to a rear seat with the lap part of
a lap/shoulder belt.
E2MS103005
Installing a Child Restraint System with
a lap/shoulder belt
To install a Child Restraint System on
the rear seats, do the following:
1. Place the Child Restraint System on
a rear seat and route the lap/shoul‐
der belt around or through the
Child Restraint System, following
the Child Restraint System manu‐
facturer's instructions.
Make sure the seat belt webbing is
not twisted.
OEN036101
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis‐
tinct click sound. Position the re‐
lease button so that it is easy to
access in case of an emergency.
OEN036104
3. Remove as much slack from the
belt as possible by pushing down on
the Child Restraint System while
feeding the shoulder belt back into
the retractor.
4. Push and pull on the Child Restraint
System to confirm that the seat
belt is holding it firmly in place.
If your Child Restraint System manu‐
facturer recommends the use of a top-
tether with the lap/shoulder belt, see
Securing a Child Restraint System with
the ISOFIX Anchorage System
page 4-34.
4
on
4-37