Kia Optima Hybrid 2017 Owner's Manual page 69

Safety features of your vehicle
Lumbar support (if equipped)
OJF035075L
The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion (1) of the
switch to increase support, or the
rear portion (2) of the switch, to
decrease support.
2. Release the switch once it reaches
the desired position.
3. Press the upper portion (3) of the
switch to move the support posi‐
tion up, or press the lower portion
(4) of the switch, to move the sup‐
port position down.
4-08
4. Release the switch once it reaches
the desired position.
Driver position memory system
(if equipped, for power seat)
OJF035065L
A driver position memory system is
provided to store and recall the driver
seat and outside rearview mirror posi‐
tion with a simple button operation. By
saving the desired position into the
system memory, different drivers can
reposition the driver seat based upon
their driving preference. If the battery
is disconnected, the position memory
will be erased and the driving position
should be restored in the system.
WARNING
Never attempt to operate the driver
position memory system while the
vehicle is moving.
This could result in loss of control,
and an accident causing death, seri‐
ous injury, or property damage.
Storing positions into memory
using the buttons on the door
Storing driver's seat positions
1. Shift the shift lever into P (for Au‐
tomatic transaxle) while the engine
start/stop button is ON.
2. Adjust the driver's seat and outside
rearview mirror comfortable for
the driver.
3. Press SET button on the control
panel. The system will beep once.
4. Press one of the memory buttons
(1 or 2) within 5 seconds after
pressing the SET button. The sys‐
tem will beep twice when memory
has been successfully stored.